Recommended 7 Way to 4 Way Connector Adapter

Question

Question:

2015 Nissan frontier. Looking for the adaptor that goes between the truck and a 4 wire flat trailer connector.

asked by: Thomas S

0

Expert Reply:

To connect your Nissan's 7-Way connector to a 4-flat you'll want to use the Pollak 7 Pole to 4 Way Connector Adapter item # PK12716.

expert reply by: Jerred H

0

Answer 1

The tech bulletin you mention, which I have linked for reference, pertains to Prodigy installation in the 2005 - 2008 model years of the Porsche Cayenne and the Volkswagen Touareg, and according to my contact at Tekonsha this procedure still applies…

view full answer...

Answer 2

Actually, the P3 now has the upgraded axis accelerometer like the P2. The Tekonsha P3 Trailer Brake Controller #90195, will work with both electric over hydraulic brakes on the trailer as well as electric brakes. It has a menu option on the display…

view full answer...

Answer 3

Tireminder recommends installing the signal booster like what comes with the part #TM89FR close to the middle of the towing rig and as far to the outside as possible. So for a fifth wheel trailer setup you'd want to install it as close to the…

view full answer...

Answer 4

I recommend using the TireMinder i10 TPMS for RVs and Trailers w/ Signal Booster - 10 Tire Sensors #TM56FR, which comes with 10 sensors and will work well for your Class A and flat towed vehicle to allow you to monitor all of the tires in your setup.…

view full answer...

Answer 5

The best tire pressure monitoring system that has a smartphone display, a strong signal, long-lasting battery and will work on your inner and outer dually tires is the TireMinder Smart TPMS for RVs - Signal Booster - 6 Tire Sensors #TPMS-APP-6 along…

view full answer...

Answer 6

The best option for a Tireminder is the part #TM49FR that you referenced which has a signal booster that will work great on your 30 foot setup. The key to getting the range is the placement of the signal booster. If you can make sure it has a clear…

view full answer...

Answer 7

Hi Robert, You’re absolutely right to be thinking carefully about this, because getting the braking system and power setup correct is what keeps everything working safely when you’re towing. I was able to confirm from your truck’s owner’s manual that…

view full answer...

Answer 8

Either way is correct. It depends on if you want to keep the semi-style 7-Way (if you need to tow that type of trailer) or if you will never be towing a semi-trailer. If you need to keep the 7-Way semi active on the truck, then you would need to make…

view full answer...

Answer 9

Hey Rick, thanks for reaching out. I see you already got your order placed but I wanted to make sure your question was answered. Yes, you can cut the 4-way plug off the #BLU92HR and wire it to a 6-pin or 7-pin plug. People actually do this all the…

view full answer...

Answer 10

Hello Michael, thanks for reaching out. We have a few braking systems that will work with your 2025 Ford Maverick. Here is a list in order of my favorite to least favorite: - Demco Stay-IN-Play Duo Braking System for RVs w/ Hydraulic Brakes -…

view full answer...

Answer 11

Here are the recommended wire gauges when installing the Pollak 7-Pole, RV Socket Vehicle End #PK12-707E: Ground - 10 gauge Electric Brake - 12 gauge Tail, License, and Running Lights - 14 gauge Battery Charge - 10 gauge Stop and Left-Hand Turn…

view full answer...

Answer 12

If you need to change out the complete wiring harness on your 2007 Nissan Frontier then you will need the Replacement Wiring Harness #118267. If you have the US carr connector still intact then you can use the Pollak #PK11893, but if you just have…

view full answer...

Recommended 7 Way to 4 Way Connector Adapter

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching