Best Tire Pressure Monitoring System TPMS with Smartphone Display for 8 Trailer Tires

Question

Question:

so for 6 tires on vehicle and 8 tires on gooseneck trailer I will need:TPMS-APP-6plus 8 qty TM-2brass correct?

asked by: Phil

0

Expert Reply:

The best tire pressure monitoring system that has a smartphone display, a strong signal, long-lasting battery and will work on your inner and outer dually tires is the TireMinder Smart TPMS for RVs - Signal Booster - 6 Tire Sensors # TPMS-APP-6 along with the Brass Tire Sensors for TireMinder TPMS # TM-2Brass which are a quantity of two sensors.

The way it works is that the senors on the valve stems and send a signal to the Bluetooth receiver, which in turn sends a signal to your smartphone. The sensors have an extensive battery life, lasting approximately a year depending on usage. The batteries are replaceable when needed with Replacement CR1632 Batteries for TireMinder TPMS # MRI-CR1632.

In regards to the signal, it is very strong, working at a distance of up to 120 feet, which is definitely going to be enough for your gooseneck trailer. I have added links to the installation instructions and video reviews of this TPMS for you to check out as well.

- TireMinder Smart TPMS for RVs - Signal Booster - 6 Tire Sensors # TPMS-APP-6
- Brass Tire Sensors for TireMinder TPMS # TM-2Brass

expert reply by: Kyle S

0

Phil

2/3/2020

ok if Im going this far 8 tires on trailer what about adding the 6 tires on 1 ton truck....best packages to buy?

Kyle S.

2/3/2020

If you want to monitor an additional six tires with the TireMinder Smart TPMS you will be able to, you simply need to add the correct amount of sensors to match all 14 of the tires you are looking to monitor. So what you will need are: - TireMinder Smart TPMS for RVs - Signal Booster - 6 Tire Sensors # TPMS-APP-6 - A quantity of 4 of the Brass Tire Sensors for TireMinder TPMS # TM-2Brass

Phil

2/20/2020

so for 6 tires on vehicle and 8 tires on gooseneck trailer I will need:TPMS-APP-6plus 8 qty TM-2brass correct?

Kyle S.

2/20/2020

So 6 tires on the vehicle and 8 tires on your gooseneck means you'll need a total of 14 sensors. For that you will need: - A quantity of 1 of the TireMinder Smart TPMS for RVs - Signal Booster - 6 Tire Sensors # TPMS-APP-6 - A quantity of 4 of of the Brass Tire Sensors for TireMinder TPMS # TM-2Brass The Brass Tire Sensors come with 2 in a pack which is why you only need to order four of those instead of 8. Adding these parts will give you a total of 14 sensors.

Answer 1

Tireminder recommends installing the signal booster like what comes with the part #TM89FR close to the middle of the towing rig and as far to the outside as possible. So for a fifth wheel trailer setup you'd want to install it as close to the…

view full answer...

Answer 2

The best option for a Tireminder is the part #TM49FR that you referenced which has a signal booster that will work great on your 30 foot setup. The key to getting the range is the placement of the signal booster. If you can make sure it has a clear…

view full answer...

Answer 3

I recommend using the TireMinder i10 TPMS for RVs and Trailers w/ Signal Booster - 10 Tire Sensors #TM56FR, which comes with 10 sensors and will work well for your Class A and flat towed vehicle to allow you to monitor all of the tires in your setup.…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

To install a Redarc Tow Pro Liberty in your 2023 Toyota Tacoma Sport you will need the following parts: Redarc Tow-Pro Liberty Brake Controller item #RED24FR Plug-and-Play Wiring Harness for Redarc Tow-Pro Trailer Brake Controllers item #RED99FR…

view full answer...

Answer 8

That's a very good question, we tend to be extra cautious and say to use 10 gauge wire because that would be more than enough. When you get into longer trailers that will end up using a lot of wire the heavier gauge wire becomes more necessary.…

view full answer...

Answer 9

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 10

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 11

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

view full answer...

Answer 12

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Best Tire Pressure Monitoring System TPMS with Smartphone Display for 8 Trailer Tires

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching