See what our Experts say about this Pollak Trailer Wiring

• How To Plug 1997 Lance Truck Camper Into 7-way Connector On 2016 Ford F-250
  We have run into this quite a few times in the past, and the best option will be replacing the Lance 7-pin connector with a standard 7-way blade connector like the # PK12706. This will give you a standard 7-way connector to plug into the factory 7-way on your 2016 Ford F-250. There is not a adapter compatible with the connector on your 1997 Lance Camper as they use their own style connector that does not match any standard connectors. I included a video of the # PK12706 for you to take...
  view full answer...
  
• Replacement for Atwood 61101 Brake Actuator
  The Demco Hydraulic Trailer Brake Actuator part # DM72VR should be a direct replacement for the Atwood 61101 Brake Actuator that you have now. This newest updated it rated at 7K instead of 6K. This is a bolt on option that mounts on 3" centers. The review you are referring to, the customer did indeed weld the brake actuator to his tongue but this is not required for installation because it is a bolt-on actuator. Unfortunately, we do no offer a bolt-on brake actuator for drum brakes with...
  view full answer...
  
• How To Power Third Brake Light On Camper Shell Using 7-Way Trailer Connector
  Yes, you can use the factory trailer connector on your 2015 Nissan Titan to power the third brake light on your Leer camper shell. That said, they don't make a plug and play harness for this so you will need to do some wiring but no splicing into the vehicle will be required. Basically, all you need is the Pacer Performance 3rd Brake Light Logic Module part # PP20-702, the Pollak Black Plastic RV-Style Trailer Connector part # PK12706 and then some loose wire and connectors to attach it...
  view full answer...
• Correct Pin Out for Truck and Trailer 7-Way Blade Connectors
  Attached are some photos of the typical wiring functions for truck and trailer 7-Way blade connectors, like parts # PK11893 and # PK12706. If you typical pull a trailer that has a 7-Way connector then you want to follow the pin out diagrams I mentioned. If the chippers that you tow have a different configuration then the Hopkins Adapter # HM47535 will likely do the trick because you can change it so that the center pin is either related to the electric brakes or the 12V power. If you...
  view full answer...
  
• Replacement Taillights with Backup Lights for KOMO Carrier
  Hi Ken, we have exactly what you need. KOMO uses the standard 6-inch trailer lights on their carriers, so an LED taillight with red running lights, turn signals, brake light and white back up lights, I recommend going with the Optronics Fusion LED taillight part # OPT47NR. This is a cool looking light at a great value that will be a direct replacement for the lights that come on the carrier. If value is more important to you than looks, then Optronics also has part # OPT57NR that is a...
  view full answer...
• How to Install the Curt Trailer Connector Part # C57101 on a 5th Wheel Trailer
  The reverse light circuit is almost always on the center pin of a 7-way trailer connector which you can see from the attached photo. If your 5th wheel trailer has reverse lights then you can just tap into this but if not you would need to run a wire from the trailer side trailer connector all the way back to the end of the trailer. Please keep in mind that in order to install the Curt Trailer Connector part # C57101 you are first going to have to splice the Curt Universal Wiring Harness...
  view full answer...
  
• Wiring An Electric Trailer Tongue Jack Into 7-Way Vehicle Trailer Connector
  Electric tongue jacks like the Electric Jack w/ Footplate - A-Frame - 25-1/8" Lift - 3.5K - Black # EJ-3520-BBX are designed to use a 12v power so if you want constant power I recommend using a trailer battery for connection. If you only want power when connected to your vehicle 7-way, you can use the Pollak Black Plastic, 7-Pole, RV-Style Trailer Connector - Trailer End # PK12706 to connect to the 12v Pin.
  view full answer...
  
• Would 7-Way Trailer Wiring Circuit Have Amperage Rating for Powering 13 amp Horn
  Standard trailer wiring circuits on 7-ways like the part # C58155 and # PK12706 are rated for up to 40 amps so if you wanted to use a 7-way like this to power a horn that is rated for 13 amps you certainly could.
  view full answer...
• How to Power Trailer Dome Light When Not Connected to Tow Vehicle
  The only way you could power interior dome lights on a trailer without it being connected to a tow vehicle would be to power the lights with a battery like a breakaway battery. How you choose to wire up the batteries will in the end be up to you, but since breakaway batteries need to be charged up when you are towing I would be careful not to drain the battery with the dome light.
  view full answer...
  
• Where To Attach Blue Wire From 5 Wires on Trailer When Installing a 7-Way Connector
  When wiring a 7-Way on your trailer with 5 wires, your green wire will be right turn/brake, the yellow wire will be left turn/brake, the brown wire will be the taillights, and the white wire will be the ground. You will want to find out if the blue wire on your trailer is needed for 12-volt power for trailer accessories, for electric brakes, or for a reverse brake lockout, if your trailer has surge/hydraulic brakes. Looking at the rear of the 7-Way connector, if you need the blue wire...
  view full answer...
  
• How to Make 7-Way Adapter for Scooter Lift to Plug Into 7-Way on Honda Ridgeline
  The adapter part # PK12716 that you referenced only carries turn signal circuits so while I have a solution that would work, this would not be it. Instead you would want to wire the scooter lift power wires to a 7-way like part # PK12706. The ground circuit will be the pin in the 5:00 position and the 12 volt power would be in the 11:00 position.
  view full answer...
  
• What Gauge Wire Is Required On a 7-Way Connector
  On a 7-Way connector the suggested minimum wire gauge for the White (ground) wire, the Red or Black (power) wire, and the Blue (brake power) wire is 12 gauge. The minimum wire gauge for the remaining Green (right turn/brake) wire, the Yellow (left turn/brake) wire, the Brown (tail lights) wire, and the Purple (reverse light) wire is 16 gauge. I have the Hopkins 7-Way Molded Trailer Wire Connector with Lead, part # H20042. This is a 7-Way blade plug on one end and a 3 foot wire lead. Also,...
  view full answer...
• 2019 MINI Cooper S with Automatic Transmission Compatibility with Tow Dolly and Bike Rack
  Based on your owners manual it does appear you can dolly tow your 2019 Mini Cooper Automatic with the front wheels off the ground but I recommend checking with your dealer for distance or speed restrictions because the owners manual only references emergency towing and gives both a speed and distance restriction of 30 miles and 30 mph with no reasoning behind those restrictions. If you find you are able to tow dolly a 2019 Mini Cooper S, then the Roadmaster Tow Dolly with Electric Brakes...
  view full answer...
• Can 2017 Ford Escape be Towed on a Tow Dolly
  I did some checking and it looks like the front wheel drive versions of the 2017 Ford Escape can be towed on a tow dolly. The 4WD versions cannot though. The Roadmaster Tow Dolly part # RM-2050-1 would be a great option for a tow dolly. It's our best priced option and would work well. To use the dolly's brakes though you'll need to install a 7-way in place of the connector that's on it with the part # PK12706.
  view full answer...
• Recommended Tow Dolly for 2014 Ford Fusion
  Which vehicle are you asking about towing, a Fusion or the F-250?
  view full answer...
  
• How to Manually Operate a Slide-Out in a Fleetwood RV or Trailer with Power Gear Motor
  The first thing you will need to do is locate the slide-out relay control and unplug the wiring harness from the controller. Then find the slide-out motor. On the back side of the motor there should be a brake lever. Turn it counter-clockwise to the release position. The room will now be able to move. In order to move it in or out use an adjustable wrench on the drive shaft cross tube to crank the room in or out as needed. Re-engage the brake lever after moving the room in or out. If...
  view full answer...
• What is Simplest Magnetic Tow Bar Lighting Solution for Tow Vehicle that has 7-Way
  Hey David, to make your life as easy as possible I would go with a magnetic lighting kit like the part # PE26UR which has a 4-way flat connector which will allow you to use an adapter like the part # PK12716 and not have to do any wiring or splicing. To use the part # 337TL257M you'd need to cut off the 4-way round and wire in the part # PK12706 instead.
  view full answer...
• Parts Needed To Connect Lights From A Removable Trailer Extension To A 5th Wheel
  Hi Rick, I am aware of the Swivelwheel extenders, though not the Blue Ox ones, so I do have an idea of what you are attempting to achieve. It sounds like what you are looking to do should pose no problems at all and shouldn't be too difficult either, especially if you are familiar with wiring. You will, of course, need some butt connectors, wiring, and both trailer and vehicle side 7 Way connectors. I have a list of everything you would need listed out below, but I included two different...
  view full answer...
• Recommended Tow Dolly for 2009 Toyota Camry XLE
  The curb weight of your 2009 Toyota Camry XLE is 3,373 lbs and it has 12-16 inch tires. With this combination, the Roadmaster Tow Dolly with Electric Brakes - 4,250 lbs # RM-2050-1 will be sufficient. If it were me, I'd go with the Roadmaster # RM-2050-1 and use 7-way Pollak Connector # PK12706 to finish the connection on the dolly. I've attached a few videos to help.
  view full answer...
• Toughest 7-Way Trailer Wiring Connector
  We offer a metal trailer 7-way with the part # HM48510 which would be the toughest 7-way out there.
  view full answer...
• How to Adapt a 7-Way Round Connector to a 7-Way Flat
  The easiest way to go from a 7-way round connector to a 7-way flat would be to get a Trailer Connector Adapter part # HM47425. However, if you are looking for a more permanent solution you would need to remove your 7-way round connector and wire up the trailer wiring to a 7-way flat connector like part # PK12706. In order to do that check out the different diagrams I attached that will help you wire up the new connector. The wiring could be different so you may need to verify the functions...
  view full answer...
  
• Recommended Surge Brake Actuator With Electric Lockout For Drum Brakes
  We do have a surge actuator that can add an electric lockout for drum brakes. I recommend the Titan Zinc-Plated Brake Actuator, part # T43397007K. This actuator is adjustable to fit 1-7/8, 2, and 50-mm hitch balls and is a bolt-on for 3 inch wide trailer tongues. The breakaway kit is included with this actuator. For the lockout you can then use # T4748800. If you have a 7-way connector on the back of your Expedition, you will need to change the trailer connector to match. I assume you...
  view full answer...
  
• Tow Dolly for a Full Size Truck with Front Track of 79 and 78 Inches
  The best tow dolly we offer is the Roadmaster Tow Dolly with Electric Brakes part # RM-2050-1. Dolly includes all lightging as well for DOT compliance. The only thing one would need to use this dolly is a trailer connector like part # PK11604 for a 6-way or part # PK12706 for a 7-way. This dolly will accept a vehicle with a front track up to 76" wide which would seem to be a bit too narrow for your application. The dolly also only accepts wheel sizes from 12" - 16" therefore would also...
  view full answer...
• Can Tow Bar 6-Way Used for Maintenance Charge Also Work to Charge When Parked
  Hey Larry, that's a pretty creative idea! Yes you could use the 6-way on the front of your towed vehicle as a way to charge it when parked. Instead of the charger connecting to the battery directly it would just being doing so through 6-way and the # DM66VR which would provide the same connection. Do you have a 6-way adapter figured out for the charger already?
  view full answer...

Do you have a question about this Trailer Wiring?