Result: 20142

Hey Jason, sorry to hear that. What is most likely happening is that the diode in the adapter is getting hot and it no longer shows the correct amount of resistance. Do you currently have two of these adapters? If so, you could prove this by using…

Hey Justin! The Roadmaster Stop Light Switch Kit #RM87GR you were looking at is the one you want for your 2025 Maverick. This is the one that is custom fit for your vehicle. Then for the relay you need the Roadmaster Brake-Lite Relay Kit for Towed…

Hello Dan, thanks for reaching out. We can definitely provide the full flat tow system for your 2026 Ford Maverick XLT Hybrid. Here is what I recommend: - Demco Tabless Base Plate Kit - Removable Arms #DM38CV - etrailer XHD Non-Binding Tow Bar - RV…

Hey Keith. The stainless steal Stromberg Carlson Folding Handrail item #AC-300 is going to be by far the strongest out of those three options. The item #AM-800 and item #AM-300 are both aluminum. The Stromberg Carlson item #AC-300 1" thick,…

If you will be towing a trailer with LED lights then you will likely need to use an adapter with a lamp-out sensor like the Tow Ready #20142 or Curt #C57003 that you referenced. Both of these adapters will accomplish the same task; plugging into an…

The Trailer Connector Adapter w/ Lamp-Out Sensor Bypass #20142 will work for your 7-way trailer and your 2021 GMC Sierra 1500. The adapter has a built-in bypass system that is designed to eliminate the issues that are associated when pulling a…

That depends on the mounting dimensions of your square lights. If you check out the picture I attached you will see the mounting hole dimensions of the part #510-9 that you referenced that you can compare to your taillights.

Hi Scott; to flat tow your 2024 Ford Maverick you will need a base plate, tow bar, safety cables, wiring, and a supplemental braking system. In addition to the Demco Tabless Base Plate Kit #DM77YV and Stay-IN-Play Duo #SM99251 or #DM86VR (with…

The hyper flashing due to LED lights on your trailer is often solved with the 7-way adapter you mentioned the Trailer Connector Adapter w/ Lamp-Out Sensor Bypass - 7-Way RV to 7-Way RV - Vehicle End #20142. The issue is often that LED's pull so…

The most popular trailer wheel bolt pattern is the 5 on 4-1/2 inch bolt pattern and as far as we are aware the bolt pattern you mentioned is not used on trailers at all. So my bet is you probably have the 5 on 4-1/2 inch. I attached a help article…

Hello and thanks for reaching out. I have heard of this issue before and this is almost always due to the LED lights on the trailer. The LED lights do not pull enough power for the truck to recognize it is plugged in. The best solution for this is to…

I was able to verify with Demco the red wire on the Coachlink #SM99945 for the Demco Stay-IN-Play #DM86VR is positive and the black is negative.