Custom Fit Mudflaps that Fit 2024 Ram Power Wagon 2500

Question

Question:

Which part number is for the Ram Rebel/Power Wagon 2024?

asked by: Victor D

0

Expert Reply:

Hey Victor, so I checked out the 2024 Ram Power Wagon 2500 and it has the fender flares/lip molding so the correct Weathertech mud flaps would be the part # WT53UR which is a set for the front and back of the truck.

expert reply by: Jameson C

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 3

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 4

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 5

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 6

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 7

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 8

Hi Ray! The MORryde GooseTech 5th Wheel to Gooseneck Pin Box for 11.5K to 14K Trailers #MR74MV can definitely be used in a short bed 3/4 ton pickup, like your 2024 Ram 2500. Just be aware that not all trailers have a tapered nose and you may not get…

view full answer...

Answer 9

Hey Bill! The Rebel is the heavier duty SumoSprings jounce springs and they have the higher weight rating at 3,000 lbs #SS64VR or 5,000 lbs #SS27GR. I usually only recommend these heavy duty versions if you have a lot of weight in the truck bed or on…

view full answer...

Answer 10

Hey John, thanks for the picture of your truck bed! To install a set of 5th wheel rails in your 2022 Ram 2500, I recommend the B&W Custom Installation Kit w/ Base Rails item #BWRVK2602. This set of rails are industry standard so they'll work…

view full answer...

Answer 11

Hey Joe. For your 2024 Ram 2500, you'll need the B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit item #BWGNRK1320. This 30,000 lbs capacity gooseneck hitch fits all both bed lengths and the diesel models. This…

view full answer...

Answer 12

Hey James, welcome back. That B&W item #BWRVK3670 is super reliable but you are not the only one who's had issues with how heavy it is. Love how you have already attempted our go to solution of taking off the lightest portion of the hitch. I…

view full answer...

Custom Fit Mudflaps that Fit 2024 Ram Power Wagon 2500

Product Page this Question was Asked From

Continue Researching