Gauge Steel Used for etrailer Scissor Stabilizer Jacks, Mounting Hardware, and Base Pads  

Matt, I'd say yes #UF48-979002 would be a bit overkill. Plus, you only get two jacks in that kit and the other kit #TJSCHD-24-4 you get 4 which is going to stabilize your trailer better. The 10K capacity that #TJSCHD-24-4 has is going to be…

Scissor jacks like the Ultra-Fab Ultra Scissor Jacks #UF48-979002 you were looking at are designed more for stabilization and less for leveling the trailer because they aren't really designed to hold the weight of the trailer off the ground.…

I really wish it did because we get these questions all the time. The B&W Patriot Slider item #BWRVK3270 won't work with the picture frame style adapters. It has to do with the spacing and also the height of the slider. The item…

We have the manual scissor jack set part #TJSCHD-24-4 which you'd install on the corners of the RV frame to level and stabilize the RV when parked. This will do a great job removing any movement an also has more than enough capacity for…

Hi Marty; to answer your question, the SnapPad SnapJack SJ for RV Scissor Jack Stabilizers #SN65FR will work for your 9,200 lb trailer, yes. The specs aren't actually for the SnapPads themselves (which I know is a bit confusing). The #SN65FR will…

The #TJSC-24 scissor style stabilizing jack isn't an RV specific product, if it's 2500 lb capacity and 18-3/4 inch lift and the pictured mounting bolt pattern is compatible with your Rockwood Mini-Lite, it'll work perfectly for you.…

The etrailer Scissor Jacks part #TJSCHD-24-4 would work great on your Keystone Premier Travel Trailer. It has more than enough capacity as it's rated for up to 10k and has a universal mount design that will fit your trailer.

Yes, the SnapPad SnapJack part #SN65FR will work with the JT's Strong Arm Jack Stabilizer Kit #LC191025 for scissor jacks. SnapPad doesn't create any clearance issues with the StrongArm.

The spacing between the mounting holes on the SnapPad SnapJack for RV Scissor Jack Stabilizers #SN65FR is approximately 1-7/8".

There is no difference between the 2,500 version of the SnapPad SnapJack for RV Scissor Jack Stabilizers, and the 5K to 7K version #SN65FR. The only difference between the two would be the capacity they can handle. In order to determine which one…

The distance between the bolts on the SnapPad SnapJack for RV Scissor Jack Stabilizers #SN45FR is 2" on center which is the standard. The same is true for the higher rated #SN65FR. If you want to use these with your scissor jacks the only option…

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…