See what our Experts say about this SnapPad Accessories and Parts

• Will SnapPad SnapJack SJ For Scissor Jacks Work With 9,200 lb Trailer
  Hi Marty; to answer your question, the SnapPad SnapJack SJ for RV Scissor Jack Stabilizers # SN65FR will work for your 9,200 lb trailer, yes. The specs aren't actually for the SnapPads themselves (which I know is a bit confusing). The # SN65FR will fit scissor jacks that have individual capacities for 5,000 lbs to 7,000 lbs. For example these will fit the Lippert Scissor Stabilizer Jacks # LC285344 which have a 5,000 lb per-jack capacity.
  view full answer...
• What Is the Difference Between the 2.5K Version and the 5K Version of the SnapPad SnapJack?
  There is no difference between the 2,500 version of the SnapPad SnapJack for RV Scissor Jack Stabilizers, and the 5K to 7K version # SN65FR. The only difference between the two would be the capacity they can handle. In order to determine which one you'd need, you'd need to determine the capacity of your trailer jack and compare it to the feet and choose the set that matches your capacity.
  view full answer...
• SnapPad SnapJack Mounting Hole Spacing
  The spacing between the mounting holes on the SnapPad SnapJack for RV Scissor Jack Stabilizers # SN65FR is approximately 1-7/8".
  view full answer...
  
• Gauge Steel Used for etrailer Scissor Stabilizer Jacks, Mounting Hardware, and Base Pads
  Thanks for reaching out, Mark! The Scissor Stabilizer Jacks w/ Handle - 18-3/4" Lift - 10,000 lbs # TJSCHD-24-4 are designed with 11 Gauge steel and install using 1/4" self-tapping screws like the Self-Tapping Screw # FA1131822. Then for base pads you just need two kits of the SnapPad SnapJack SJ for RV Scissor Jack Stabilizers # SN65FR and you'll be good to go!
  view full answer...
• Comparing Ultra-Fab and Stromberg Carlson Scissor Jacks for Trailers
  Hey Mark! I recommend the Ultra-Fab Ultra Scissor Jacks # UF48-979002 over the Stromberg Carlson Leveling Scissor Jack Set # JSC-24 any day of the week because the Ultra-Fab is backed by a limited lifetime warranty and it has a higher weight rating so not only will the jacks have an easier time with the weight of your trailer, if any malfunction were to occur you can have confidence in the warranty. The Stromberg Carlson has a lower weight rating and a 1-year limited warranty so it's...
  view full answer...
• Distance Between Bolt Holes on SnapPad SnapJack for RV Scissor Jack Stabilizers
  The distance between the bolts on the SnapPad SnapJack SJ for RV Scissor Jack Stabilizers # SN65FR is 2" on center which is the standard. If you want to use these with your scissor jacks the only option would be to replace the one with the 1-1/2" measurement. If you know what travel height and capacity you need I would be happy to help you find a replacement. I have also attached a link to all of our scissor jacks below for your reference.
  view full answer...
• Why are the SnapPad SnapJack for RV Scissor Jack Stabilizers Available in a 2 Pack Instead of a 4
  The SnapPad SnapJack for RV Scissor Jack Stabilizers # SN65FR are made available to us from the manufacturer in packs of 2. I do not know their reasoning, but that is likely why they are available from us the same way. That being said, it is still easy enough to get 4 of the SnapPad SnapJack for RV Scissor Jack Stabilizers # SN65FR by getting a quantity of 2. Maybe they did it in packs of 2 so if you only needed to replace the front or rear jacks pads, you could do that without having...
  view full answer...
• Will SnapPad for Scissor Jacks Work if JTs Strongarm is Used
  Yes, the SnapPad SnapJack part # SN65FR will work with the JT's Strong Arm Jack Stabilizer Kit # LC191025 for scissor jacks. SnapPad doesn't create any clearance issues with the StrongArm.
  view full answer...
• Is There a Pad For Feet of Lippert Scissor Stabilizer Jacks
  Hey there Robert, thanks for the question and there is a pad that will work for the Lippert Scissor Stabilizer Jacks # LC285326. What you can use are the SnapPad SnapJack SJ for RV Scissor Jack Stabilizers # SN65FR.
  view full answer...