Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
Hello Eugene, You’ll have no problem towing the Thule Outset at highway speeds #TH34FR39XB, it’s built for real-world travel. Once it’s folded up for transport, the tent is completely secure and stable, and Thule rates it for normal highway driving…
view full answer...Hey Mark, I was able to cross reference the part number you listed and found that the correct replacement motor would be our part #LC67FR. What RV do you have?
view full answer...To flat tow your 2023 Ford Bronco Badlands behind your RV with a Blue Ox set up you will need the following parts: Tow Bar and Safety Chains - Blue Ox Alpha 2 Non-Binding Tow Bar item #BX7380. This tow bar features non-binding latches and a swivel…
view full answer...Hey Laurentius, thanks for the information! Your WFCO WF-9990 has a 90 amp converter in it so the only option we have to match that rating is the Progressive Dynamics 4500 Series RV Converter w/ Charge Wizard and AC/DC Distribution Panel - 90 Amp…
view full answer...For the Redarc Tow-Pro Elite Trailer Brake Controller #RED44FR is an easy installation with the Tekonsha Wiring Harness #3041-P. You will just use the white connector of the harness along with the wire length and cut off the other end of the…
view full answer...The Redarc Tow-Pro Liberty #RED24FR is the way to go over the Elite #RED44FR as you get the nicer functions of the Elite at a lower price. The Elite has the ability to be the more preferred proportional style of controller as well as a time-delayed…
view full answer...For your 2019 Jeep Grand Cherokee, the harness connection point is under the dash to the left hand side. I've attached a photo to help as well as a video of this installation. If you are using a Tekonsha Brake Controller like the Prodigy P3…
view full answer...I wish I had better news, but the ER code means that there is an internal problem on the Draw Tite Activator part #5504 and that it needs to be replaced. For a new brake controller I would recommend the Prodigy P2 Brake Controller part #90885. This…
view full answer...No, you can't. Those hooks are only for recovery or pulling something they're not rated to be flat towed with. You are actually going to have to remove them to install a base plate kit on your 2023 Ford Bronco. Since you have a Blue Ox Alpha…
view full answer...The Tekonsha Prodigy P3 Trailer Brake Controller #90195 will work on your 2001 Toyota 4Runner. Since your 4Runner did not come installed with a factory 7-way connector you will need one to complete the install. If you do not have a 4-way connector…
view full answer...One of the major differences between a round bar system and a Trunnion bar system is if ground clearance is an issue, you may be better off choosing a Trunnion-bar system simply because these bars slide into the weight distribution head instead of…
view full answer...We have just what you need to get this job taken care of. There are two wiring kits you will need, the Curt T-Connector #C56327 and the Universal Installation Kit #ETBC7. These two kits combined will include everything you need to install a 7-way on…
view full answer...