Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
view full answer...A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…
view full answer...If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…
view full answer...If you have never used a brake controller before, the P2 #90885 will be easier to learn on and use than the P3, #90195 initially. The P3 has several features the P2 doesn't including the ability to change the LED screen color, change the…
view full answer...The 119251 part that you referenced is actually the same as the Tekonsha ZCI Circuit Protected Wiring Harness #119250KIT, which is indeed a fit for your 2010 Mini Cooper. We simply use a different part number on our end for organizational purposes,…
view full answer...To add a 7-way to your 2023 Ford F-150 that already has a 4-way, all you need is the following: - Universal Installation Kit for Trailer Brake Controller #ETBC7 This will give you the 7-way, wiring, circuit breakers, and rest of the hardware needed…
view full answer...The best 4-way to 7-way adapter for your 2013 Ford Escape is going to be the part #ETBC7L as it comes with everything needed to activate the 12 volt accessory circuit as well to charge the trailer battery.
view full answer...For starters, if you will be using the Curt Echo Mobile Trailer Brake Controller part #C51180 then I recommend the 7-Way RV Upgrade Kit for Trailer Brake Controller Installation part #ETBC7L instead of the Universal Installation Kit for Trailer Brake…
view full answer...Trailer brake controllers like the Prodigy P2 #90885 use a 4-wire hook up. The wire functions and connections are as follows: BLACK wire carries 12V power and connects to the vehicle + battery post through a 20- or 30-amp circuit breaker like…
view full answer...The Universal Wiring Kit #ETBC7 that you referenced is indeed what you need to install a fully functional 7-Way on your 1996 Isuzu Trooper so that you can install the Tekonsha Prodigy P2 Brake Controller #90885 to power the trailer's electric…
view full answer...We haven't had the opportunity to install the #EH97FR EcoHitch as of yet, but hen we installed the Curt #C13416 on a 2021 RAV4, we found that the inside top edge of the receiver tube sat about 12 inches above the ground, which would place the…
view full answer...Based on the picture you provided I believe you have the SAE solar plug port on your Braxton Creek Bushwhacker Plus 17BH so you should have no issues plugging your Go Power DuraLite Portable Solar Panel with Digital Solar Controller #GP66FR in using…
view full answer...Related Searches
Filter Your Search
Contact and Help