Replacement Idler Hubs For 2011 TDX Pro Team Tracker Trailer With TDE 46210 Stamped on Hubs

Updated 02/06/2024 | Published 02/05/2024

Products Featured in This Question

Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized

(738)

$65.28

Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles

(2617)

$7.65

Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Pre-Greased

(1007)

$56.27

Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Galvanized

(512)

$53.40

Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased

(1442)

$55.01

Kodiak Trailer Hub for 3,500-lb Axles - 5 on 4-1/2 - Stainless Steel

(48)

$188.95

Replacement Trailer Hub Bearing - L44649

(2074)

$14.16

Replacement Trailer Hub Bearing - L68149

(2074)

$14.31

Lionshead Trailer Wheel Lug Nut - 1/2"-20 - Stainless Steel - Qty 1

(497)

$8.36

Question:

I need to replace my hubs on a 2011 tdx pro team tracker trailer. The markings on the old hubs are TDE, 46210.

asked by: Chris S

Expert Reply:

The TDE 46210 is going to be same as a typical 3,500lb hub with 5 on 4-1/2" bolt pattern. We have a few options for this depending on what you are looking for and if your axle has the easy grease fitting on the end of the spindle.

Standard Painted # AKIHUB-545-35-K
Easy Grease Painted # AKIHUB-545-35-EZ-K
Standard Galvanized # AKIHUB-545-35-G-K
Easy Grease Galvanized # AKIHUB-545-35-G-EZ-K
Stainless Steel # KH84545S

If you choose the stainless steel you will need an Inner Bearing # L68149, outer Bearing # L44649 and a Grease Seal # 58846 for each hub. This is the only hub which does not include these parts or 5 of the Lug Nuts # LHLR103.