Looking For Replacement Hubs And Bearings For A DW58 Swivelwheel Trailer
Updated 05/23/2024 | Published 05/04/2024 >
Products Featured in This Question
Question:
I have a DW58 Swivelwheel Trailer with a 5.70X8 D rated 8 ply tire on it but I dont know what HUB assembly to buy for it? it can hold 1000 s on the trailer but I dont know the rating on the half Torsion Axles to buy the right size Bearing kit and new hub for it? I am not by the trailer and was hoping you guys were familiar with that type of Golf Cart Trailer? thanks.
asked by: Derek E
Expert Reply:
Hello Derek. I can definitely point you in the right direction. Unfortunately, we do not have a way to accurately recommend a hub or bearings based on just the model of trailer. Knowing the axle weight capacity can help to narrow things down. The only way for you to truly know what hub to get will be for you to go to the trailer, remove one of the hubs and unpack the bearings. Each bearing should have a number stamped on the edge which we can use, or you can measure the OD and ID with a caliper.
Looking at these DW58 Swivelwheel Trailers online it appears to be a 5 lug hub, but they do not list any specifics beyond that in their online manual. It might be a standard 5 on 4-1/2" hub like part AKIHUB-545-35-G-EZ-K. This uses a # L68149 (1.378" inner diameter) and # L44649 (1.063" inner diameter) bearings which are very common. Please do remove a hub and confirm this next time you are at the trailer.
If you can provide me with the inner and outer bearing sizes or numbers, as well as the hub bolt pattern I am happy to recommend a hub for you. I wonder if you contact a Swivelwheel trailer dealer they could possibly give you that info if you provide the VIN? Feel free to drop that info in the comments below when you get it.



Derek
5/22/2024
UPDATE! I was able to pull the old bearings apart and verify the numbers on the DW58 Swivelwheel Trailer! Straight Spindle with grease fitting, both bearings will be the same L44649 inner and outer! 2k pound Axles! I received the new Hub Assembly kit and installed…ALL Good! People will need this info ONLY on this model Swivelwheel Trailer!!! Thanks

Product Page this Question was Asked From
Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2
- Trailer Hubs and Drums
- Idler Hub
- Standard
- L44643 / L44643
- Standard Grade
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- Redline
more information >
Continue Researching
- Video: 3500lb Trailer Idler Hubs Direct Comparison
- Video: In-Depth Review of the Easy Grease Trailer Idler Hub Assembly for 3.5K Axles
- Shop: Easy Grease Trailer Idler Hub Assembly for 2K Axles - 5 on 4-1/2 - Galvanized
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Pre-Greased
- Search Results: grease
- Search Results: brake cleaner
- Search Results: marine grease
- Search Results: trailer hubs and drums
- Search Results: 5 on 5~1/2 inch trailer hubs and drums
- Search Results: 545 hub
- Q&A: What Kind Of Grease Is Used In The etrailer Pre-Greased Hubs AKIHUB-545-35-EZ-K?
- Q&A: What is the Inner Diameter of the 3,500 lbs Dexter Trailer Idler Hub Assembly?
- Q&A: Hub for E-Z Lube Spindle on Boat Trailer
- Q&A: Replacement Hub for 1989 Ranger Trailer
- Q&A: Replacement Trailer Idler Hubs For a 2007 Tracker TrailStar Boat Trailer
- Q&A: 3,500LB Hubs, Brakes and Spindle Needed For a 5 on 5-1/2" Bolt Pattern
- Q&A: Replacement Idler Hubs For 2011 TDX Pro Team Tracker Trailer With TDE 46210 Stamped on Hubs
- Shop: Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: LubriMatic Marine Trailer Wheel Bearing Grease - 3 oz. Cartridges - Qty 3
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2


Derek E.
5/6/2024
Yes, thank you for that I was hoping you do have some past experience with these as I am not by my trailer to pull apart and was hoping to order the correct package now so when I do pull it apart I have everything I need. And yes they do not have anything on their website as far as technical information and unfortunately they are not too good at answer their phones anyway. But it was a shot and thank you for your time, I will be purchasing the correct setup from you guys of course. thanks.