Replacement Options Air Conditioner Options For A 1998 Monaco Dynasty

Question

Question:

I have a 1998 Monaco Dynasty equipped with 2 Duo-Therm Dometic AC units with 5 button thermostat. I would like to find some direct replacements for those ac units please.

asked by: Javier A

0

Expert Reply:

To determine a replacement for your Dometic Duo-Therm units you'll first need to remove the air distribution box cover and determine the connection type, whether it's a 6 or 9-pin connector or if it's hardwired. Next you'll want to remove the shroud of the rooftop unit to check the BTU rating. There should be a sticker somewhere on it that states either 13,500 or 15,000 BTU's. Depending on these circumstances I have the following recommendations:

13,500 BTU's
6-pin # FR26PR
9-pin # FR82PV

15,000 BTU's
6-pin # FR58PR
9-pin # FR42PV

If your units are hardwired you would need to use a 6-pin connector style unit and reach out to Dometic and Furrion for the wire functions to hardwire in the new units correctly.

expert reply by: Kevin C

0

Answer 1

Hey Earl! Yes, the Coleman-Mach Signature Mach 15 AC system can replace your old Dometic Duo-Therm. These are new R32 refrigerant units (everything is as of 2025) so a complete replacement will be necessary. You can choose from the following based on…

view full answer...

Answer 2

To replace the existing Dometic Duo Therm AC on your 2000 Holiday Rambler I highly recommend the Advent Air #ACDOM150 because it was designed specifically to replace Dometic setups as long as yours has the needed 6-pin connector already. I also…

view full answer...

Answer 3

Hey Bob, you'll want to go with the Furrion Chill HE Replacement RV Air Conditioner for Coleman Setup - 15,000 Btu - White #FR42PV. This is specifically for Coleman, Dometic, or Advent distribution systems.

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 6

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 7

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Answer 8

That's a very good question, we tend to be extra cautious and say to use 10 gauge wire because that would be more than enough. When you get into longer trailers that will end up using a lot of wire the heavier gauge wire becomes more necessary.…

view full answer...

Answer 9

Hey Frank, The conversion kit you mentioned #LC329251 is only compatible with Solera awnings and would not work for your Dometic awning. For your Dometic you will need to go with the Solera #LC434729which is designed to work with Dometic awnings.…

view full answer...

Replacement Options Air Conditioner Options For A 1998 Monaco Dynasty

Products Featured in This Question

Featured Help Information

Miscellaneous Media

Continue Researching