Replacement Jack Options For a NAPA Trailer Tongue Jack # 8215214
Published 08/16/2023
Products Featured in This Question
Question:
I have a Napa Trailer Tongue Jack part number 8215214, fold up can you tell me what you offer that will be the same style that mounts with the c clip that holds the unit in place thank you
asked by: Darren D
Expert Reply:
Unfortunately, the only information I could obtain from NAPA regarding your 8215214 tongue jack is it is rated for a 5,000lb lift capacity, is 14-1/5" tall and has a top wind handle. The Bulldog # BD171401 is going to be the closest option but you will need to verify your jack has the 2-5/16" Snap Ring # BD500241. A better option would be to switch to the Trailer Valet JXS Trailer Jack # TV64FR. This jack is also rated for 5,000lbs and bolts onto a frame up to 4-3/4" tall and 3-3/4" deep. I like this jack as you can use the included drill adapter to easily raise and lower the jack. It can also be completely removed by pulling a pin which allows you to store the jack inside the vehicle instead of being exposed to any weather while being towed.
Continue Researching
- Article: Wiring Trailer Lights with a 5-Way Plug (It's Easier Than You Think)
- Search Results: bulldog snap ring jack
- Search Results: snap ring trailer jack
- Video: An In-Depth Look at the Round Snap Ring Swivel Jack w/ Footplate
- Video: Detailed Breakdown of the REPL Snap Ring for Swivel Trailer Jacks
- Video: An In-Depth Look at the Replacement Snap Ring for Bulldog Snap-Ring Swivel Jacks
- Video: Review of the Pro Series Snap-Ring Swivel Marine Jack
- Video: The Low-Down on the Pro Series Round, Snap-Ring Swivel Jack
- Shop: REPL Snap Ring for Swivel Trailer Jacks - 2-5/16" Inner Diameter
- Q&A: Swivel Trailer Jack With 2-1/2" Opening for Snap Ring Mounting Bracket
- Q&A: How is a Replacement Snap Ring For Fulton Snap-Ring Trailer Jacks Measured
- Q&A: Distance from Mounting Surface to Center of Jack Tube on Bulldog BD171401
- Q&A: Determining Correct Snap Ring for 2007 Fleetwood Williamsburg Camper Jack
- Q&A: Can the Internal Parts of A Pro Series Jack Fit Inside the Housing of a Comparable Bulldog Jack
- Q&A: Replacement Weld on Mount for Bulldog Swivel Jack # BD171401
- Q&A: Comparing Fulton and Bulldog Replacement Snap Rings for Snap Ring Trailer Jacks
- Video: All You Need to Know About the Replacement Retaining Ring for Curt Snap Ring Swivel Jacks
- Shop: Replacement Retaining Ring for Curt Snap Ring Swivel Jacks
- Shop: Replacement Retaining Ring for etrailer and Ram Snap Ring Swivel Jacks
- Shop: Curt Round, Snap-Ring Swivel Jack - Weld On - Topwind - 15" Lift - 2,000 lbs