View Cart

etrailer Round Snap Ring Swivel Jack with Footplate Review

content loading

Customers compare TJBB-2001-B to these similar products

Products Featured in this Video

Review of the etrailer Round Snap Ring Swivel Jack with Footplate

Speaker 1: Today, we'll be having a look at the Round Snap Ring Swivel Jack with Footplate, part number: TJBB-2001-B. With the jack installed, we'll no longer need to worry about using a jack stand or other device to hold our trailer coupler off the ground now. Our landing gear makes contact with the ground which will keep our coupler off the ground.One thing that I like about it is how easy it is to use. With our folding arm here, we can easily crank to raise our jack which will then raise our coupler higher off the ground or off our trailer ball. We have quite a bit of range of motion here, which makes it easy to couple and uncouple to multiple different vehicles which may or may not have a different hitch height on them.One thing's that great is that it is a folding design. So, when we're coupled up to a vehicle to help reduce the interference from the ground or potentially running our jack into something.

You can pull this lever, and it can swing the jack back and up to a horizontal position where we'll have the most ground clearance possible. Now, you can swing it back or you can swing it forward if you need to, as well, depending upon if you have anything mounted on the frame of your trailer which could interfere with the jack.To help increase the life of our jack, it is greasable via this zerk fitting right here. The jack give us 10 and a half inches of travel. So, from the foot peg all the way up to the bottom about 10 and a half inches range of motion in order for us to couple and uncouple from our vehicle easily.Now, this jack has a 2,000 pound lift capacity. So, it has the ability to lift a trailer with a 2,000 pound tongue weight.

It has a 3,000 pound support capacity. So, if we weren't lifting, and we just wanted to hold a trailer in place, we could easily do that with a 3,000 pound tongue weight.Now, this jack is designed to work with this multiple attachment points on trailer frames anywhere from two inches tall to no more than four inches tall. It will also work on trailer frames that are no more than three inches wide. The diameter of our outer tube is two and a quarter inches wide and our inner tube is two inches wide. The outer tube and the brackets have a black powder coat finish, so it's strong and durable.Our hardware, our handle, and our landing gear have a zinc finish on them.

So, they'll also be very rust and corrosion resistant. From the center of our handle to the outer part, we have a radius of seven and three-quarters of an inch. So, just keep that in mind so when you mount it you'll be able to have full rotation. Our footplate dimensions are seven and a half inches long by three and three-quarters inches wide. Now, because of the large surface area of our footplate, if we park our trailer in an area of soft ground, this'll help minimize sinking into the ground.Now, many of our customers have stated that they found this jack to be very strong and durable even a year later after purchasing it.

They also like how it comes with all the mounting hardware you need to install it. There's no guesswork on what you're gonna need in order to get it in place on your trailer. A couple have mentioned that they really like that fact that you can easily grease it. So, you don't have to worry about it drying out and becoming difficult to use.Now, we compared this to the Pro Series round jack, part number: PS1400300303. The Pro Series jack doesn't have a zerk fitting on it. So, it's not as easily greasable as the jack.Here we are at our trailer. As you can see, we don't have a jack on it right now, and we're left to support it with alternate methods. In our case, since we're in our install bay, we're using our lift. We'd also have to use a jack stand or cinder blocks or blocks of wood or something like that in order to keep your tongue off the ground when you're unhooked from your vehicle.This is where having a jack would be really handy. We would be able to have our trailer easier to hook up no matter where we are. We won't have to bring cinder blocks or jack stands or blocks of wood with us anymore.To begin our install, you'll notice how we have multiple different holes along the side of our jack. This is to accommodate different heights of frames. So, we're gonna hold it up and see which holes line up best for our case. For us, we'll be using the second hole here and the bottom hole. So, we'll go ahead and put bolts through these locations on both sides.Now, these brackets are a little bit different. The way they line up you'll be using the top hole here on the top, and then we'll skip one and then go down to this one on the bottom. And, we'll thread on an island lock nut. Now, we'll snug down our hardware using a nine-sixteenths wrench and socket ensuring that our bolts are flat against the trailer frame on the top. With our bolts tightened down, we now have a nice secure jack to our trailer.And, that'll complete our look at the round snap ring swivel jack with foot plate, part number: TJBB-2001-B.

Questions and Comments about this Video

add comment

Info for this part was:

Video by:
Joshua S
Installed by:
Cole B
Video Edited:
Chris R
Installed by:
Brent H

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.