Replacement Parts for 2005 Marine Master Trailer

Updated 05/16/2023 | Published 05/13/2023

Products Featured in This Question

Curt Trailer Hitch Receiver - Custom Fit - Class V - 2-1/2"

(225)

$410.34

4" Carbon Fiber Digital Caliper

(26)

$12.21

Question:

I have a 2005 Marine Master oil bath hub tandem axle trailer with UPF axle serial # A2306311. I am needing replacement hubs, rotors single axle brakes, brakes, bearings, seals, and see thru bearing buddys for the oil bath. Do you have any suggestions? No longer can i find the manual.

asked by: Don B

Expert Reply:

To find the right replacement parts you will need to measure and identify the parts you have. Dexter bought UFP and they do not have any information on your axle with that serial number. A good place to start would be with the bearings.

You can look at the bearings to see if they have part numbers stamped on the side. If not, you will need to measure using a digital caliper like the # PTW80157. You can either measure the inside diameter of the bearings, or the spindle where the bearings ride. The same goes for your seal. Once you know what bearings you have, you will be able to find the correct hub or hub/rotor assembly.

When you say see through bearing buddy I'm assuming you mean an oil cap. This would also require measuring, or matching up the cap to whatever replacement you end up getting.

I have attached some links below to our hubs, disc brakes, and oil caps for you to check out. If you measure/identify your parts and you still aren't sure what to get feel free to reach out and I will help you find the best replacement.

expert reply by: Robin H