Search: lug nut set   >  

We do have a very similar replacement coupler that is rated for 21,000 GVWR, and it is the Titan Bolt-On Coupler #T4855300. The angle that your photo was taken I can not tell if it is a 2 or 3 hole adjustable coupler, but this Titan part is a 3 hole…

We do have a bearing with a 1.75 inch inner diameter, the Replacement Trailer Hub Bearing #25580. That said, there are numerous bearings with a 1.25 inch inner diameter, and I wouldn't be able to tell you exactly which one you need, so I've…

EZ Lube axles like the item #T3584F-EZ-8974 come from the factory with just a little bit of grease in the bearings. The first time you use the EZ Lube feature to fill the axle, it will take a lot of grease. You will probably use 3/4 to a full tube…

Some boaters actually swear by closed lug nuts as in general water is kept away from more of the wheel stud. With either setup though you still risk having problems that might cause a lug to break but I wouldn't necessarily blame your issue on…

From what I have found, your T-23979 is the same as the Dexter 010-010-00 seal. This has a 2.125" inner diameter and 3.376" outer diameter. The correct replacement would be the Grease Seal - Double Lip - 2.125" ID - 3.376" OD -…

Yes, the grease seal part #GS-2125DL that you referenced is the correct seal you'd need for your 5,200 lb UFP Dexter axle. This matches the dimensions you listed.

The replacement grease seal for your 7,000 lb Dexter axle will either be the #GS-2125DL or #GS-2250DL. The difference is the inner diameter of the seal. The #GS-2250DL has an inner diameter of 2.250" and the #GS-2125DL has an inner diameter of…

Based on the dimensions you listed the correct replacement grease seal you would need is the part #GS-2525DL that you referenced as it has an inner diameter of 2.125 inches and an outer diameter of 3.376 inches.

After installing The Kodiak Disc Brake Kit #K2HR35D you will need a hydraulic brake actuator that requires at please a 1,500 psi rating. The Dexter DX Series Electric Over Hydraulic Brake Actuator for Disc Brakes #K71-651 has a 1,600 psi rating so it…

Brake parts are manufactured with one of several different finishes - raw metal, e-coat, silver cadmium, or Dacromet or they are made entirely of stainless steel. Parts vary in price and in the degree of resistance to corrosion, depending on the…

The Dometic 310 Part-Timer RV Toilet - Standard Height - Round Bowl - Slow Close Lid - White Ceramic #DOM57FR was designed to be able to be used year round, meaning it has some of the same features that a normal "house" toilet will have.…

It looks like most of our 16" trailer wheels with a 8 on 6-1/2" bolt pattern have a 4.88" or 4.9" pilot hole. If that is what you have then you can use the Lionshead Trailer Wheel Center Cap part #LHCS109-SI60C. Please note, we…