Recommended Ladder Rack for the Toyota Deck Rail System

Question

Question:

Do I need anything to mount this or is everything I need is in the box

asked by: Mike

0

Expert Reply:

Thanks for the picture! It looks like your Tacoma has the Toyota Deck Rail System. The Thule TracRac TracONE Ladder Rack item # TH27000XTB-TA includes everything you will need to install this rack on a your 2014 Toyota Tacoma. You will not need any additional adapters. It has an aluminum U-channel and specially designed clamps that fit the factory track system in your bed.

expert reply by: Jerred H

0

2014 Tacoma
(click to enlarge)

Answer 1

If you check out the picture I attached you will see how the clamps of the TracRac TracONE part #TH27000XTB-TA install with the deck rail system of a 2015 Toyota Tacoma. The deck rail system is basically a track that runs around the truck bed. The…

view full answer...

Answer 2

Congratulations on the purchase of your 2009 Toyota Tacoma. The most you will be able to carry with a ladder rack on this vehicle if you have the deck rail system is 800 lbs because that is what the deck rail system limits you to. Therefore, the best…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

To install a Redarc Tow Pro Liberty in your 2023 Toyota Tacoma Sport you will need the following parts: Redarc Tow-Pro Liberty Brake Controller item #RED24FR Plug-and-Play Wiring Harness for Redarc Tow-Pro Trailer Brake Controllers item #RED99FR…

view full answer...

Answer 6

Hi Steve; the factory hitch on the 2013 Tacoma has the bumper brackets integrated into the hitch. You can replace it with the etrailer Trailer Hitch #e98850 but you will have to remove the old hitch and find new bumper brackets to complete the…

view full answer...

Answer 7

There are a couple of differences between the two. The JetStream bars like #Y00425 are made of extruded aluminum while the CoreBars such as the #Y00421 you've looked at are constructed of galvanized steel. As you've mentioned, the CoreBar has…

view full answer...

Answer 8

The aftermarket hitches for a 2011 Toyota Tacoma don't fit alongside the factory installed hitch; some trucks have hitches you can add on to OEM hitches that fit underneath the original. So I can't see any reason why you wouldn't be able…

view full answer...

Answer 9

Hey Todd! Yes, the Yakima OverHaul HD Adjustable Truck Bed Ladder Rack w/ Tonneau Cover Adapters #Y01151-5755 is compatible with the Synetic MR Retractable PRO Tonneau Cover on your 2025 Toyota Tacoma. The adapters will fit the T-slot rails on that…

view full answer...

Answer 10

Yes, it does John. The OBD2 is the diagnostics port that repair shops and inspection places use to connect to your 2012 Tacoma's computer. The electric brake control harness on your 2012 Toyota Tacoma will be located underneath the drivers side…

view full answer...

Answer 11

Hey Daniel congrats on the new truck! The Lomax Stance Hard Tonneau Cover item #LOM54RV does indeed fit the 2026 Chevrolet Silverado EV with the Mid Gate. It also works with the Multi-Flex Tailgate that comes on the Trail Boss models. For a…

view full answer...

Recommended Ladder Rack for the Toyota Deck Rail System

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching