Product Experts Available Now!
Call 1-800-940-8924
THIS ITEM IS NOT A FIT FOR
2005 Land Rover LR3
We'll connect you with nearby partnered installers who know this exact setup.
Thule TracRac TracONE Ladder Rack for Toyota Tacoma - Fixed Mount - 800 lbs - Black
Part Number: TH27000XTB-TA
In Stock
$819.90
2005 Land Rover LR3
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
We'll connect you with nearby partnered installers who know this exact setup.
- All Info
- Reviews (445)
- Q & A (0)
- Photos
Thule Ladder Racks - TH27000XTB-TA
Highlights
- Custom Fit for Your Vehicle: Installs with hardware that attaches to your truck's bed rails or stake pockets
- Handles Heavy Loads: 800-lb capacity easily carries ladders, lumber, or kayaks.
- Clamp-On Installation: Mounts to bed rails using included hardware—no drilling needed.
- Rustproof Strength: 6000-series aluminum with matte black dual powder coat resists corrosion.
- Quiet Ride: Aerodynamic elliptical bars and airfoil strips cut drag and wind noise.
- Secure Cargo: Four adjustable aluminum load stops keep gear from shifting in transit.
Features to know about
Heavy-Duty Load Support: Carries Up To 800 lbs
This fixed-mount ladder rack is built to handle serious weight. With an 800-lb carrying capacity, it can haul long or oversized gear like ladders, lumber, or kayaks without flexing under pressure. The wide base at each upright adds extra stability, so you don’t need extra bracing to keep everything secure on the road.
Streamlined Performance: Elliptical Aluminum Crossbars
The aerodynamic crossbars cut down on wind resistance and noise. Each bar has an internal web structure that adds strength without adding bulk, and a built-in airfoil strip at the front edge keeps wind from whistling through the slots. The 65" long, 4" wide, 1-1/2" tall bars are strong but lightweight, so you can load heavy gear without losing payload capacity.
Quick Clamp-On Setup: No-Drill Mounting Kit
You don’t need to drill into your bed rails to install this rack. The included aluminum U-channel and clamp kit attach directly to the factory track system using just a few tools. Each upright base is held in place by two heavy-duty aluminum clamps, creating a tight, durable connection that’s ready to work right away.
Rustproof Durability: Matte Black Dual-Stage Finish
The rack is made from 6000-series aluminum, so it’s rustproof from the start. Thule adds a matte black electrostatic powder coat followed by a clear coat for extra protection against scratches and corrosion. The finish keeps the rack looking clean and tough through every season.
Adjustable Utility: Slotted Crossbars With Load Stops
Each crossbar features top and bottom channels for mounting accessories. The included four aluminum load stops slide inside the slots, letting you quickly adjust for different cargo widths or tie-down setups. The channels also accept a variety of other TracRac accessories, so you can customize the rack for whatever you’re hauling.
Specs
Weight and Capacity
- Carrying capacity: 800 lbs
Dimensions
- Crossbar dimensions: 65" long x 4" wide x 1-1/2" tall
- Upright support height: 26-1/4"
Warranty
- Ladder rack: Limited lifetime
- Mounting kit: 2-Year
27000XTB Track Rack Track One Truck Bed Rack - Black Matte Finish
34000 Track Rack Track One Mount Kit for Toyota Tacoma - 2005-2015 Model Years
Replaces TracRac TA27000B-34
This Product Fits The Following Vehicles
- 2005 - 2015 Toyota Tacoma 5 Foot Bed
- 2005 - 2015 Toyota Tacoma 6 Foot Bed
Ratings & Reviews
4.6
445 reviews
by:
Brad
11/15/2025
I'm happy with the product, but installation was a bit of a pain. I figured I'd leave a review for others so they don't make the same mistakes I did.
The primary issue is the really long allen-head bolts used to clamp down on the sides of the bed (see picture). They are way longer than they need to be, and leave no room to use a drill driver or socket wrench. For all eight of these bolts, I had to use the short end of an allen wrench and turn these less than a half turn at a time. It took forever. For those doing this installation in the future, I recommend buying much shorter bolts. The kit comes with 3/8"-16 x 3.0" bolts. The bolts could easily be half as long, at 1.5". You'll need 8 of them. If you end up getting hex head bolts rather than allen head, you'll want to make sure the head is as small as possible to allow room for a socket wrench to fit over it and not scrape up the sides of the truck bed.
The other thing that would have made this installation easier is not putting the end caps on until after the the main assembly is mounted on the truck. There's a screw that holds the end caps on and it's difficult to get the holes lined up unless you're under it. The instructions say to do this before mounting it on the truck. I recommend skipping this step and coming back to it as the final step.
I'm otherwise happy with the product and I would recommend it.
The primary issue is the really long allen-head bolts used to clamp down on the sides of the bed (see picture). They are way longer than they need to be, and leave no room to use a drill driver or socket wrench. For all eight of these bolts, I had to use the short end of an allen wrench and turn these less than a half turn at a time. It took forever. For those doing this installation in the future, I recommend buying much shorter bolts. The kit comes with 3/8"-16 x 3.0" bolts. The bolts could easily be half as long, at 1.5". You'll need 8 of them. If you end up getting hex head bolts rather than allen head, you'll want to make sure the head is as small as possible to allow room for a socket wrench to fit over it and not scrape up the sides of the truck bed.
The other thing that would have made this installation easier is not putting the end caps on until after the the main assembly is mounted on the truck. There's a screw that holds the end caps on and it's difficult to get the holes lined up unless you're under it. The instructions say to do this before mounting it on the truck. I recommend skipping this step and coming back to it as the final step.
I'm otherwise happy with the product and I would recommend it.
by:
Antony
02/19/2026
2015
Toyota
Tacoma
This rack kit included additional special clamps for Tacoma's track at an additional price, something necessary to install. I was immediately impressed at the quality of the materials and engineering. It was not too difficult to assemble and install, but one should use a torque wrench. In a few cases I needed to chase the threads in the clamps. Tightening the clamps was difficult because the bolt head was too close to the bed wall to use a ratchet and could only use a L shaped hex key - kinda awkward. Once installed, I'm very pleased with it's strength and appearance. I will add that doing business with etrailer was a pleasure from the info on their site to the shipping and communication.
by:
Seth
08/12/2022
I love this truck rack! I want to give it 4.5 stars but that’s not an option. The reason I’m leaving 4 stars instead of 5 is so that people will read this review for the one critical element that gives it a mark down. The brackets are made specifically for a Toyota Tacoma with the bed rails. The issue is that the bolts used to tighten the rack to the truck are so tightly wedged against the inside bed of the truck that it’s almost impossible to get to them. It’s incredibly easy to strip the head of the bolt because of the angle required to insert a tool to tighten them onto the truck bed.
For context I do not keep this attached to my truck at all times it is only used when I need to utilize the truck rack.
We purchased some ratchet style tools that allow us to put it on faster but that does not prevent the stripping of the head of the bolt used to tighten the brackets.
My recommendation to Thule And or etrailer is to include the necessary tools to attach this to the truck because there is no standard tool that works well. The ratchets that we purchased were maybe $10 each however the hex bit required is still too long even at an inch. If we could find them in half an inch that would be optimal, but my search has so far proven unsuccessful.
With that said it holds the weight limit as indicated and felt super sturdy on a 14 Hour drive loaded with roughly 450 lbs.
For context I do not keep this attached to my truck at all times it is only used when I need to utilize the truck rack.
We purchased some ratchet style tools that allow us to put it on faster but that does not prevent the stripping of the head of the bolt used to tighten the brackets.
My recommendation to Thule And or etrailer is to include the necessary tools to attach this to the truck because there is no standard tool that works well. The ratchets that we purchased were maybe $10 each however the hex bit required is still too long even at an inch. If we could find them in half an inch that would be optimal, but my search has so far proven unsuccessful.
With that said it holds the weight limit as indicated and felt super sturdy on a 14 Hour drive loaded with roughly 450 lbs.
by:
Jim
09/01/2026
2013
Toyota
Tacoma
My rack was delivered within a couple days. It was easy to assemble and great quality.
by:
John
03/10/2021
Just received the shipment and planning on putting it together today. All instructions are clear. Product nicely packaged for shipping. Product looks well manufactured. I am very satisfied.
John
3/10/2022
It is great equipment.
by:
Tyler
12/27/2022
The racks are awesome, and the customer service from Paul was even better. Thanks guys!
by:
Jason
06/23/2021
Toyota
Tacoma
Made to clamp easily to a Tacoma. Exactly what I needed.
Jason
6/24/2022
Perfectly! No issues.
by:
Galen
03/03/2022
Awesome rack, able to hold everything I need... yet they are light and durable.
by:
Chris
05/14/2020
2008
Toyota
Tacoma
The rack is exactly as described. Very sturdy and looks great on the Tacoma...it will haul canoes for many trips to come!
by:
Lawford
12/01/2025
by:
Jared
10/03/2022
by:
Michael
12/16/2021
by:
Henry M
04/12/2024
by:
Nick
09/02/2022
2011
Subaru
Outback Wagon
by:
Todd
05/14/2024
2012
Toyota
Tacoma
by:
Casselynn
12/23/2022
2014
Toyota
Tacoma
by:
Jeff
05/07/2025
Outstanding product. Fit was perfect. Easy to install and great customer service and support.
Gwendolyn Y.
5/9/2025
The rack looks awesome on your truck, Jeff! Looks like you got some kayak carriers up there?
Jeff
5/8/2026
Still holding strong. No chips in the powder coat and the finish has not faded. What a great product.
by:
Rocky @ Rox Roofing
05/26/2026
Purchased TracRac for my 2020 f250. I carry a 28 foot ladder every day. So far so good. I would recommend it and would by another if needed.
Claire H.
6/2/2026
It's always great to hear from someone putting the TracRac to work every day. We appreciate the recommendation and are happy it's been a good fit for your F-250!
by:
Eric
09/15/2026
2026
Ram
1500
nice to look at but all clamps needed tapped to except the 3/8x3 stainless you furnished. also needed to change those Allen bolts to hex head do to factory installed tie down rail
by:
Frank
08/05/2026
2022
Ford
F-150
Every part is designed to fit very well with tolerances uncommon these days from foreign suppliers.
Needing something for both work and free time; hauling ladders and watercraft and this fits my needs on those. I still need to figure out the best means for securing the cargo but having the secure platform of these racks makes that a lot more doable.
Needing something for both work and free time; hauling ladders and watercraft and this fits my needs on those. I still need to figure out the best means for securing the cargo but having the secure platform of these racks makes that a lot more doable.
by:
Steven
07/02/2025
Rack is solid state man, it is relatively easy to install, except for the all head bolts that hold the the tacoma rail system , there very close to the skin of the truck bed and torque them in is time consuming, other then that i use it for everything. Thank you
Gwendolyn Y.
7/10/2025
Looks like you're ready to head out to the water, Steven! Heading anywhere fun soon?
by:
Frank
03/14/2025
Fantastic experience from ordering to receiving my new Thule Trac Rac system. My package was delivered quickly and without any damage.
The installation instructions were clear and simple to follow. I’m very happy with my new rack system
The installation instructions were clear and simple to follow. I’m very happy with my new rack system
Gwendolyn Y.
3/14/2025
The new rack looks awesome on your truck, Frank! What are you going to use it with?
by:
Sean
07/01/2026
2023
toyota
Tacoma
Product itself is good and as advertised, however, one of the mounting brackets/clamps in the tacoma conversion kit has a screw hole that was machined improperly, making it impossible to use that clamp unless you had the appropriate tools to correct the threading.
by:
Jay S.
04/21/2026
toyota
Tacoma
1. One of the cross members is miss-drilled causing the end cap to extend past the end of the cross member which is causing a whistling noise as I drive.
2. The clamps for mounting on the Tacoma with bed rail have poor quality control of the tapped holes. I had to force the bolts into the threads stripping the first couple threads.
almost as if the bolts were cross threaded but they were not. it was 6 out of the clamps.
3. Also, tightening the bolt on the clamp causes deformation in the bed rail. An insert to install in the rail would eliminate the deformation. I see this leading to the clamps loosening as the deformation continues.
The overall rack gets a 3 star due to the quality control of the threads and the miss-aligned hole in the cross member.
The clamps get 2 stars as i anticipate the constant maintenance issue with the damage to the rails.
2. The clamps for mounting on the Tacoma with bed rail have poor quality control of the tapped holes. I had to force the bolts into the threads stripping the first couple threads.
almost as if the bolts were cross threaded but they were not. it was 6 out of the clamps.
3. Also, tightening the bolt on the clamp causes deformation in the bed rail. An insert to install in the rail would eliminate the deformation. I see this leading to the clamps loosening as the deformation continues.
The overall rack gets a 3 star due to the quality control of the threads and the miss-aligned hole in the cross member.
The clamps get 2 stars as i anticipate the constant maintenance issue with the damage to the rails.
by:
Jason
07/26/2026
I will have to say the C clamps screw holes were powder coated. They didn’t cover the holes before they powder coated, and there is eight clamps!! Took me a very long time to get those screws through…
25
445
true
Show More Reviews
See what our Experts say about this Thule Ladder Racks
- Recommended Ladder Rack For A 2014 Toyota Tacoma Hauling Two Paddle BoardsHey Angela, If you're wanting a ladder rack then I recommend the Thule TracRac TracONE Ladder Rack # TH27000XTB-TA. This rack comes with load stops that you could use to secure your paddleboards or you could go with a track mounted carrier like the Inno Locker Watersport Roof Rack w/ Tie-Downs # INXA445.
view full answer... - Do Yakima Accessories Fit the Thule TracRac TracONE Ladder Rack on a 2012 Toyota Tacoma? Yes, they will Harry. The Thule TracRac TracONE Ladder Rack item # TH27000XTB-TA is compatible with Yakima surf racks like their SUPDawg item # Y04075. This ladder rack is compatible with both the 5' and 6' bed lengths of the 2012 Toyota Tacoma. The crossbars measure 65" long x 4" wide x 1-1/2" tall. Please note that the Thule item # TH27000XTB-TA ladder rack is not compatible with tonneau covers of any style. Which specific Yakima accessories are you looking at? You can add this information...
view full answer... - Ladder Rack Recommendation for a 2015 Toyota Tacoma with Deck Rail SystemIf you check out the picture I attached you will see how the clamps of the TracRac TracONE part # TH27000XTB-TA install with the deck rail system of a 2015 Toyota Tacoma. The deck rail system is basically a track that runs around the truck bed. The gadget-like tie downs that run front to back in your truck bed would be installed in the deck rail system so the # TH27000XTB-TA would fit and work well.
view full answer...
- Will TracRac TracOne Ladder Rack Fit A 2017 Toyota Tundra TRD Pro?The TracRac TracOne will work great for your truck, however the # TH27000XTB-TA is not the correct fit for your truck. For your 2017 Toyota Tundra, you will want the TracRac TracONE Truck Bed Ladder Rack - Fixed Mount - 800 lbs - Matte Black # TH27000XTB if you don't have the Deck Rail System. This system is not compatible with the Deck Rail System. The TracRac TracOne has slotted rails for quick and easy adjustments as well as accepting a wide variety of accessories. The matte black...
view full answer... - Recommended Ladder Rack for the Toyota Deck Rail System Thanks for the picture! It looks like your Tacoma has the Toyota Deck Rail System. The Thule TracRac TracONE Ladder Rack item # TH27000XTB-TA includes everything you will need to install this rack on a your 2014 Toyota Tacoma. You will not need any additional adapters. It has an aluminum U-channel and specially designed clamps that fit the factory track system in your bed.
view full answer...
- Can Thule TracRac SR Ladder Rack be Installed on 2007 Toyota TacomaI believe you are referring to the Deck Rail system on your 2007 Toyota Tacoma. For that you can use the Toyota Tacoma Mount Kit # TH34000 which allows you to then install either a TracONE or Xsporter Pro ladder rack, but unfortunately there is no way to install the TracRac SR on your Tacoma. If you are interested in purchasing a new system that comes with everything you need then we have the following that is compatible with your Deck Rail system: TracONE: Silver # TH27000XT-TA Black...
view full answer... - Recommended Ladder Rack For A 2011 Toyota Tacoma With Deck Rail SystemMy ladder rack recommendation for your 2011 Toyota Tacoma with deck rails is the Thule TracRac TracONE Ladder Rack for Toyota Tacoma - Fixed Mount - 800 lbs - Black, part # TH27000XTB-TA. It comes with elliptical shaped crossbars to cut down on wind noise and aid in fuel efficiency. These bars also have a t-channel, so any channel mounted accessories will work with this ladder rack. It can also carry up to 800 lbs. If you are in need of a canoe rack, we have the premium option, Lockrack...
view full answer... - Thule TracRac TracONE Ladder Rack Recommendation for 2018 Toyota Tacoma with Deck RailFor your 2018 Toyota Tacoma Access cab with the deck rail the Thule TracRac TracONE kit you need is the part # TH27000XTB-XK4B which comes with the correct adapters you'd need. You wouldn't need to also separately provide any adapter.
view full answer... - Thule Ladder Rack Fits for 2010 Toyota TacomaIf your Tacoma has the Deck Rail cargo management rails in the bed, we do offer some Thule ladder racks that are compatible with your truck, but the # TH27000XTB-XK4B you'd looked at is a fit for newer models and wouldn't work with your truck. For your 2010 model, I'd recommend the TracONE # TH27000XTB-TA or if you have a crossover style toolbox in the bed that sits atop the bed side at either end, use the TracONE # TH27000XTB-500 that includes toolbox mounts. If you don't have the...
view full answer... - Ladder Rack Recommendation for 2015 Toyota Tacoma With Front Bar Extension for Longer LadderYour best option for a longer ladder like that is the Thule TracRac TracONE Ladder Rack w Cantilever # TH27000XT-TAE which is a fit for your 2015 Toyota Tacoma and has a cantilever extension on the front bar for better support and stability for your longer ladder. Check out the picture I attached that shows the front bar setup.
view full answer...
- Cantilever Extension for TracRac TracONE Ladder Rack TH27000XTB-TACantilever Extension part # TH24002XT is offered for addition to the Trac Rac SR, T-Rac Pro 2 and TracONE ladder racks including the rack system you referenced, # TH27000XTB-TA.
view full answer... - Highest Capacity Aluminum Ladder Rack for a 2009 Toyota TacomaCongratulations on the purchase of your 2009 Toyota Tacoma. The most you will be able to carry with a ladder rack on this vehicle if you have the deck rail system is 800 lbs because that is what the deck rail system limits you to. Therefore, the best option we have for you is the Thule TracRac TracONE Ladder Rack for Toyota Tacoma part # TH27000XT-TA for silver or part # TH27000XTB-TA for black. These systems are both made of aluminum which means they are very lightweight, only 50 lbs....
view full answer... - Why Doesn't Thule TracRac TracONE Have LocksThere are no lock cylinders anywhere on the Thule TracRac TracONE # TH27000XTB-TA that you referenced or lockable sections. It would take someone with plenty of time and all of the correct tools to remove this ladder rack and steal it. Not saying it's impossible, but it would be pretty rare for that to happen.
view full answer... - Ladder Rack for a 2006 Toyota Tacoma with Factory Bed LinerWe have several ladder racks that will fit your 2006 Toyota Tacoma with factory liner. I have included a link to the options for you. The T-Rac, # TH37004XT, is one of the options that you can use. The TracONE, # TH27000XT-TAEX is one more economical option. It is also available in black # TH27000XTB-TA. The lowest cost option is # DZ95053 but it only installs on one side of the truck bed. I have included some instruction links as well.
view full answer... - Does The Rubber Stripping In Rola Ladder Rack For 2014 Toyota Tacoma Need To Be Cut For AccessoriesYes, the buffer strip in the Rola Haul-Your-Might Ladder rack cross bars for the 2014 Toyota Tacoma part # 59799 needs to be cut to fit around your channel mounted accessories. You will need to measure to cut the exact location of your anchors. Most Ladder Racks do not come with the rubber buffer strips in the bars. If you want a ladder rack designed without the rubber strips Thule TracRac part # TH27000XTB-TA for the Toyota Tacoma is a great option. The bars are aerodynamic to cut down...
view full answer... - Ladder Rack Fits for 2015 & 2016 Toyota TacomaThe TracRac TracONE ladder rack that fits the 2015 Toyota Tacoma with the deck rail system is kit # TH27000XTB-TA which features a black finish. This rack does not fit the 2016 model year.
view full answer... - Is The Thule TracRac TracONE Ladder Rack Compatible With Rooftop Cargo BoxesSince the Thule TracRac TracONE Truck Bed Ladder Rack # TH27000XTB has aero bars and can be moved around to fit different crossbar spread requirements you can easily use a cargo box. The Thule Force XT XXL Rooftop Cargo Box # TH6359B provides 22 cubic feet of cargo space and can fit a crossbar spread from 23-5/8" to 35-1/2". You'll just want to make sure that when you set your towers for the # TH27000XTB that your center to center measurement for your crossbars fall between this range....
view full answer... - Ladder Racks Manufactured In The U.S.AThe Rola Haul-Your-Might T3 Truck Bed Ladder Rack part # 59799 is not made or manufactured in the U.S.A. however, I do have a very similar option that is made and manufactured in the U.S.A. For this, you will want to use the TracRac TracONE Ladder Rack for 2005 to 2015 Toyota Tacoma part # TH27000XTB-TA. Both the Rola and TracRac ladder racks have an 800 lb. weight capacity, however, the Rola rack comes with a 5 year warranty whereas the TracRac comes with a limited lifetime warranty.
view full answer... - Will TracRac TracONE Ladder Rack Fit Deck Rail System in a 2015 Toyota TacomaTracRac TracONE Ladder Rack # TH27000XTB-TA will fit your 2015 Toyota Tacoma Sport with the Deck Rail system. This ladder rack comes with special hardware that allows the ladder rack to attach to the Deck Rail system. This means that you will not need any other parts for installation!
view full answer... - Is There A Ladder Rack Compatible With 2005 Toyota Tacoma Crew Cab & 2013 Nissan Frontier Crew CabWe do sell ladder racks that are compatible with each of these vehicles. Unfortunately, we do not sell a ladder rack that is compatible with a 2005 Toyota Tacoma crew cab that comes with a 6' truck bed and the Deck Rail system and a 2013 Nissan Frontier crew cab with 5' truck bed and the Utili-Track system. If you prefer are more traditional ladder rack, your Toyota Tacoma is compatible with the Thule TracRac TracONE Ladder Rack for Toyota Tacoma - Fixed Mount - 800 lbs - Black, part...
view full answer... - Ladder Rack and Truck Bed Tent Recommendation for a 2014 Nissan FrontierBoth the TracRac Ladder Rack part # TH27000XTB-TA and the Rightline Truck Bed Tent part # RL110765 have been confirmed to fit your 2014 Nissan Frontier with a 5 foot bed. But to use the tent you will need to remove the ladder rack. The crossbars of the rack would extend too far out to the sides to allow the tent to fit over it.
view full answer... - Top Cover Recommendation for TracRac TracONE Ladder RackFor a rubber strip to use on top of the part # TH27000XTB-TA you would want the part # TARX-12007-1. This will work to protect the top of the bars and prevent skidding.
view full answer...
Do you have a question about this Ladder Rack?
Info for this part was:
Edited by:
Tyler C
Expert Research:
Jameson C
Video Edited:
Chris R
Updated by:
Wilson B
Updated by:
Alex H
Updated by:
Michael B
Written by:
Matthew S
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Kate F.
11/19/2025
We love reviews like yours Brad! Thanks for the great pointers for the next person trying to install this ladder rack. We really do appreciate you taking the time, etrailer is lucky to have you as a neighbor (customer).