bing tracking image
Q & A Icon

Replacement Disc Brakes, Bearings, and Actuator for 2010 EZ Loader Boat Trailer  

Question:

I need a disc brake kit for an EZ Loader boat trailer: Single Axle 3700# total capacity 6 bolt pattern 15 wheel Disc Brakes Please also include in case I need them: bearing kit is it easier as entire hub assembly? New Actuator: I currently have the UFP A-75 Actuator. I dont understand difference between lockout and not lockout...how do you backup with no lockout? Model is 2010 model EZB 19-22/24 3700 Thank you

0

Expert Reply:

According to EZ Loader, your trailer uses # LM67048 outer and # 25580 inner bearings. The correct bearing kit is the # BK3-310. We have 3 options for disk brake kits for your trailer, with the difference being the finish. The 3 options are as follows:

-Kodiak Disc Brake Kit - 12" Hub/Rotor - 6 on 5-1/2 - Dacromet # K2HR526D

-Kodiak Disc Brake Kit - 12" Hub/Rotor - 6 on 5-1/2 - Dacromet/KodaGuard # K2HR526DKG

-Kodiak Disc Brake Kit - 12" Hub/Rotor - 6 on 5-1/2 - Dacromet and Stainless # K2HR526DS

The bearings and grease seal are sold separately. These use a different outer bearing # 15123 (which has the same inner diameter your current bearings have) so you will need the # BK3-110.

To replace your UFP A-75 brake actuator I recommend the Dexter DX7.5L A-60 Brake Actuator w Electric Lockout # DX89FR. A brake actuator without a lockout would require free backing brakes which won't activate when in reverse. This is something you only find on drum brakes. Since these are disc brakes, you need a manual or electric lockout to keep the brakes from activating.

If for some reason you don't already have an electric lockout you will need to add a 5-way. On the vehicle side you can use the Curt Trailer Connector Adapter # C57187. For your trailer you would need to add the # HM37918.

expert reply by:
0
Robin H

Products Referenced in This Question












Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>