Will Air Lift Air Bags Fit a 2016 GMC Yukon XL with MagneRide

Question

Question:

Will this work on a 2016 Yukon Denali XL with magnetic ride?

asked by: Gary G

0

Expert Reply:

I do have an option for you but the Air Lift 1000 Air Helper Springs for Coil Springs won't work on a 2016 GMC Yukon XL with MagneRide. That said, we do have a compatible option for you in the Timbren Rear Suspension Enhancement System part # TGMRYS4 which work equally well to provide support while towing or hauling and it works with the MagneRide.

expert reply by: Conner L

0

Answer 1

Per AirLift, their #AL60769 system won't fit 2018 Suburban models equipped with the auto-leveling suspension. SumoSprings offers an option that would work for you, part #SSR-204-40. The SumoSprings would replace the factory jounce bumpers, and…

view full answer...

Answer 2

Thanks for the picture! Yes, it will. The old factory connector on your 2005 GMC Yukon XL Denali will pop out once you disconnect the wiring harness and you'll be able to insert the Curt Replacement OEM USCAR Trailer Connector item #C42JR.

view full answer...

Answer 3

I really like the Trailer Hitch Receiver Lock part #BW74FR that you looked at. B&W always uses the best quality materials available and tries really hard to protect everything from the elements. When working with customers I have never heard of…

view full answer...

Answer 4

Yes, while maybe not the most ideal recovery point you could use the Blue Ox Base Plate Kit #BX2655 as a recovery point as it is designed to be strong enough to move the weight of the vehicle.

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 9

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 10

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Will Air Lift Air Bags Fit a 2016 GMC Yukon XL with MagneRide

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching