How to Determine the Correct Replacement Trailer Idler Hub
Updated 11/11/2013 | Published 11/09/2013 >
Products Featured in This Question
Question:
Is product 84555UC1 the correct hub for a 5 on 5 1/2inch with a spindle that has a inner size of 1 3/8inch that narrows to 1 1/16inch for the outer bearing?
asked by: Keith
Expert Reply:
To determine the correct hub for your trailer you will want to go by the inner and outer bearing numbers stamped into the metal of the bearings. With these numbers I can determine which hub is a correct fit. Hub # 84555UC1 uses inner bearing # L68149 and outer bearing # L44649.
The inner bearing # L68149 has an inner diameter of 1.378 inches. Outer bearing # L44649 has an inner diameter of 1.063 inches. Bearing measurements are in decimals and go to the thousandth of an inch because they have to be precise. Based on the fraction measurements you have provided the bearings match but you will want to go by the numbers on the bearings to confirm.
The bearings, seal, and grease cap are all included. The races are already pressed into position inside the hub.
Product Page this Question was Asked From
Dexter Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 5-1/2- Pre-Greased
- Trailer Hubs and Drums
- Idler Hub
- Standard
- L68149 / L44649
- Standard Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 5-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Continue Researching
- Search Results: dexter 010 036 00
- Video: Installation of the Dexter E-Z Flex Suspension Kit - Enclosed Trailer
- Video: Dexter E-Z Flex Equalizer Kit Review
- Q&A: How To Upgrade a Dexter D60 Axle To Use 8 on 6-1/2 Inch Hubs
- Shop: Kenda Karrier KR53 ST235/80R16 Radial Trailer Tire with 16" White Mod Wheel - 8 on 6-1/2
- Shop: Dexter Grease Seals - I.D. 2.25" / O.D. 3.376" - for 12 in x 2 in Hubs after 1998 - Qty 2
- Shop: Provider HD ST235/80R16 Radial Trailer Tire - Load Range G
- Shop: Dexter E-Z Flex Equalizer Kit - Double-Eye Springs - Tandem Axle - 6,000 lbs
- Shop: Dexter E-Z Flex Suspension Kit - Double-Eye Springs - Tandem Axle - 6,000 lbs
- Shop: Timken Bearing Kit, 14125A /25580 Bearings, 14276/25520 Races, 10-36 Seal
- Shop: Dexter Trailer Hub and Drum Assembly - 5,200-lb to 7,000-lb Axles - 12" Diameter - 8 on 6-1/2
- Q&A: Comparing Kenda KR03, KR35, And KR53 Tires
- Search Results: trailer hitch
- Shop: Trailer Hitch
- Article: Trailer Wiring Diagrams
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Shop: Trailer Wiring
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Search Results: trailer tires and wheels
- Q&A: Best Suspension Upgrade for 33" Tandem Axles: Road Armor vs Dexter EZ Flex for Ember 22ETS
- Video: Hands-On with the Hub Saver Hub and Wheel Protector
- Search Results: trailer wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Suspension Enhancement
- Search Results: trailer jack
- Shop: Brake Controller
- Q&A: Which is Better for Highway Use 4.80-12 or 5.30-12 Trailer TIres
- Video: How To Choose Camper Leaf Springs
- Article: How to Measure for Trailer Hitch Drop
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)

