Suspension Enhancement Recommendation for 2022 Ford F-350 Towing Trailer

Question

Question:

Im looking for your input on summo springs vs timbrens for my 2022 f350 srw crew cab long bed. looking to help rear when towing goosneck dump trailer and cargo trailer.

asked by: William C

0

Expert Reply:

Between Timbrens like the part # TFRTT350J and the SumoSprings # SSR-127-54 that fit your 2022 Ford F-350 crew cab long bed I would recommend going with the SumoSprings as you get the support you are wanting without causing the ride quality to be overly harsh. Timbrens do give great support but they are notorious for being pretty harsh.

For my best recommendation for your truck I would recommend the RoadActive Suspension kit part # RAS3611-SHD if your vehicle does not have factory overload springs or part # RAS3611-SLHD for if you do. These kits are easy to install, easily adjustable, provide great support, and unlike other options improve ride quality and handling characteristics instead of making them worse.

expert reply by: Jameson C

0

Answer 1

Hey Woody, thanks for reaching out! The MORryde Safe-T-Rail Telescoping RV Hand Rail #MR54BR is more of a universal installation, and will fit RVs that have flat fiberglass walls. It measures 52.2" tall and there are a few other considerations…

view full answer...

Answer 2

The E6 error you are getting from the Furrion RV Tankless Water Heater #FR93FR could be from a variety of different things. I have added a cut out from the manual which goes over what the E6 error code means. It is unlikely you need to change your…

view full answer...

Answer 3

Yes The RoadActive Suspension kit #RAS3611-SHD will be a good fit for your 2022 Ford F-250 cab and chassis. Provided it does not have factory top overload springs. If it does have factory top overload springs you will want to go with #RAS3611-SLHD…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 9

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 10

Hello Sam; that is a great question! I reached out to Furrion and you will be able to use the Furrion Chill Cube #FR69TD (white) or #FR49TD (black) with your furnace. However, the remote is not capable of operating the furnace at this time. Also, we…

view full answer...

Answer 11

From what I can find the Norcold N306.3 fridge has a 2.7 cu ft capacity and is 20-1/8" wide and 26" tall. The most similar option we can offer is the 3.2 cu ft Everchill RV Mini Refrigerator #324-000111. The #324-000111 measures…

view full answer...

Answer 12

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...