Replacement Bearings, Races, Grease Seal and Tang Washer For 7,000LB Axle With Flat Spot on Spindle
Updated 06/15/2022 | Published 06/13/2022
Products Featured in This Question
Question:
Help what tang washer do I need for 7000 pound axel? This one has a flat spot on top of spindle. Thanks
asked by: Mark E
Expert Reply:
The Replacement Spindle Washer # 5-101 is the tang washer that is typically used on spindles that have the flat spot on the threaded end of the spindle.
This washer is included in our Bearing Kit # BK3-210 that fits most 7,000lb trailer axles using Inner Bearing # 25580 and Outer Bearing # 14125A with a 2.125" Grease Seal # GS-2125DL.
We also have the Bearing Kit # BK3-200 that uses the same bearing sizes but a larger 2.250" Grease Seal # GS-2250DL. This kit does not include the tang washer listed above.
Product Page this Question was Asked From
Replacement Spindle Washer - Tang Type for E-Z Lube
- Accessories and Parts
- Trailer Spindles
- Spindle Washer
- 1 Inch I.D.
- TruRyde
more information >
Continue Researching
- Search Results: lippert correct track
- Search Results: trailer hubs and drums
- Search Results: 023 027 00
- Q&A: Replacement Hubs for 2017 Grand Design Momentum 350M
- Shop: Replacement Trailer Wheel Bearing Kit, 14125A/25580 Bearings, 14276/25520 Races, Seal 10-36
- Search Results: timken 25580
- Shop: 6-Leaf Double-Eye Spring for 7,000-lb Trailer Axles - 24-7/8" Long
- Shop: Trailer Wheel Bearing Kit, 14125A/25580 Bearings, 14276/25520 Races, GS-2125DL Seal
- Video: A Closer Look at the Bearing Kit, 14125A/ 25580 Bearings, 10-36 Seal
- Video: etrailer VS Dexter Self Adjusting Brakes Comparison
- Video: Setting up the etrailer Electric Trailer Brakes on a 2017 Grand Design Reflection Fifth Wheel
- Video: Review of Lippert Trailer Brakes - Electric 12 Inch L R Trailer Brake Assemblies ABS Hubs - LC83PX
- Q&A: Parts Needed to Change Hydraulic Brakes to Electric Brakes on Trailer
- Q&A: Replacement Bearings for Dexter 5,200 lb Axles
- Q&A: What Gauge Wire to Use When Wiring Up Trailer Brakes
- Q&A: Does Lippert 12" Electric Brake Assembly ABS Need To Be Programmed Or Paired For Setup?
- Q&A: Replacement Brake Assemblies and Bearing Kits for Dexter 7K Axle on Jayco North Point 387RDFS RV
- Q&A: Replacement Bearing Kit with Grease Seal for Lippert 7k Axles
- Video: 6-Leaf Double-Eye Spring for 7,000-lb Trailer Axles Review
- Shop: 7-Leaf Double-Eye Spring for 8,000-lb Trailer Axles - 24-7/8" - Black
- Shop: Trailer Hub and Drum Assembly for Lippert ABS System - 5.2K - 7K Axles - 12-15/16" - 8 on 6-1/2
- Shop: Dexter Bearing Kit - Bearings 15123/25580, Races 15245,25520, Seal 10-36
- Shop: Trailer Hub and Drum Assembly for Lippert ABS System - 5.2K - 6K Axles - 12-15/16" - 6 on 5-1/2
- Search Results: axle washer
- Video: Detailed Breakdown of the Replacement Spindle Washer
- Search Results: trailer hitch
- Shop: Trailer Hitch
- Article: Trailer Wiring Diagrams
- Shop: Trailer Wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
on Accessories and Parts
