Will Timbren Rear Suspension Enhancement System Fit 2008 Ford F-250 With 8 Inch Lift
Updated 03/14/2022 | Published 03/12/2022 >
Products Featured in This Question
Question:
TFR250SDF Work with my truck that’s lifted 8” ?
asked by: Brandon K
Expert Reply:
The Timbren Rear Suspension Enhancement System # TFR250SDF will fit your 2008 Ford F-250 but you may need quite a few spacers. You will need to measure from the frame to the axle where the Timbren would install to find the correct spacers. Timbren recommends 1/2" to 1" of clearance between the axle and the Aeon rubber spring.
The height of this kit with the included spacer is 7-3/4" so you will need to subtract 8-1/4"-8-3/4" from your measurement which will tell you how many spacers you need and what size. For a 3/8" bushing we have the 1/2" spacer # TA25722-90P00 and the 1" spacer # A25723-90AH00. For a 1/2" bushing there is the # TA25722-90F00 and # TA25723-90AD00. This will also required a longer bolt which you can acquire at a local hardware store.
Product Page this Question was Asked From
Timbren Rear Suspension Enhancement System
- Vehicle Suspension
- Towing/Load Leveling
- Bump Stops
- Suspension Only
- Extra Heavy Duty
- Rear Axle Suspension Enhancement
- Timbren
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Suspension Enhancement
- Search Results: suspension enhancement
- Shop: Timbren Rear Suspension Enhancement System
- Q&A: Rear Suspension Enhancement For A 2017 Ford F-150 With A 6" Lift
- Video: DIY Install: Timbren Rear Suspension Enhancement System on your 2005 Ford F-250 and F-350 Super Duty
- Shop: Timbren Rear Suspension Enhancement System
- Shop: Timbren Rear Suspension Enhancement System
- Shop: SumoSprings Solo Custom Helper Springs - Rear Axle
- Shop: Timbren 1/2" Spacer for Raised Frame Vehicles
- Shop: TorkLift StableLoad Suspension Upgrade w Quick-Disconnect - Lower Overload Springs - Stainless Steel
- Shop: Timbren 1/2" Spacer For Raised Frame Vehicles - 1/2" bushing
- Shop: Trailer Hitch
- Video: DIY 2012 Ford F-250 Super Duty Installation for the Durabilt Hammerlock Coupling Link for 3/8" Chain
- Shop: Trailer Wiring
- Q&A: Does Spacer Need to Be Used When Installing Timbren Kit on 2010 Ford F-250 Super Duty
- Q&A: Comparing B&W And Draw-Tite Class V Trailer Hitches For 2004 Ford F-250/350 King Ranch
- Q&A: Will Timbren Kit Fit 2016 Ford F-250 with 6 inch Lift
- Q&A: Suspension Enhancement Options For 2001 Ford F-250 4x4 With 4 Inch Lift Kit
- Q&A: How do I Tell if the Brake Controller is Bad
- Q&A: Timbren Springs Not Lining Up with Axle Bracket on 2004 GMC Yukon XL




