bing tracking image
  1. Accessories and Parts
  2. Timbren
  3. Vehicle Suspension
  4. Lift Spacers
Timbren 1/2" Spacer For Raised Frame Vehicles - 1/2" bushing

Timbren 1/2" Spacer For Raised Frame Vehicles - 1/2" bushing

Item # TA25722-90F00
lowest price pledge
Retail:$15.53
Our Price: $8.82
You Save: 43%
Accessories and Parts
Orders above $99 qualify for Free Shipping
Shipping Weight: 0.29 lbs
Quantity: 
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Videos

Need help with installation?
Locate installers near me
1-800-496-5010 to order Timbren accessories and parts part number TA25722-90F00 or order online at etrailer.com. Free expert support on all Timbren products. Guaranteed Lowest Price and Fastest Shipping for Timbren 1/2" Spacer For Raised Frame Vehicles - 1/2" bushing. Accessories and Parts reviews from real customers.
  • All Info
  • Reviews (9)
  • Q & A (0)
  • Videos (1)
  • Photos
  • Why etrailer?

Timbren Accessories and Parts - TA25722-90F00

  • Vehicle Suspension
  • Lift Spacers
  • Timbren


Fits vehicles with raised frames

Features:

  • Fits vehicles with raised frames
  • Qty. 1 spacer
  • 1/2" bushing



A25723-90F00 Timbren 1/2" Spacer





Video of Timbren 1/2" Spacer For Raised Frame Vehicles - 1/2" bushing

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Timbren Vehicle Suspension TA25722-90F00 Review

Speaker 1: Today we're taking a look at the Timbren 1/2 inch spacer for raised frame vehicles. Now, Timbren recommends that you have a 1/2 inch to an inch and a 1/2 of clearance between the Timbren and the contact point when your vehicle isn't under a load. If the clearance is more than what's recommended, then a spacer is the ideal solution for you. It installs easily, it allows you to have full function of your Timbren suspension system, even though you're working with a vehicle that has a raised frame. This one measures a 1/2 inch thick. The bushing in the center is a 1/2 inch bushing, that's the diameter of the hole.Remember that you may need longer hardware since you're adding the spacer to your set up.

You can go to your local hardware shop, pick something up. That's exactly what we do when we install these on customer vehicles here in our shop. Overall diameter of the unit edge to edge is four inches. Again, thickness is a 1/2 inch thick. Now, with this part number you get one spacer.

I also want to mention that we do offer this spacer in a one inch thickness. That's available at etrailer.com with part number TA25723-90AD00 and again, you can view that at etrailer.com. That's gonna do it for today's look at the Timbren 1/2 inch spacer for raised frame vehicles.


Customer Reviews

Timbren 1/2" Spacer For Raised Frame Vehicles - 1/2" bushing - TA25722-90F00

Average Customer Rating:  5.0 out of 5 stars   (9 Customer Reviews)


by:

Worked as they should. I like the little extra space for my 2017 F150 5.5ft bed. Had the 1 inch spacers from the lot and were about 1/4in from hitting no under load. You will want to get some shorter bolts more than likely to snug up the 1/2 in spacers if you had the 1in before. The bolts I had left the 1/2 in spacers loose and didn’t like that. Over all tho good product




by:

I’m very happy with product!! I will purchase more from etrailer.com in the future


Comments
Great. I use them on all my trucks
Brian - 11/01/2021


by:

They gave me he perfect lift I needed to level everything out.




by:

The 1/2" spacers worked perfectly and are of quality material just what I needed for the makeup on my lifted truck.




by:

Great product. Works just like they said it would!




by:




by:




by:




by:



9
9

See what our Experts say about this Timbren Accessories and Parts



  • What is the Outer Diameter of Timbren Spacer # TA25723-90AD00
    The Timbren spacer # TA25723-90AD00 has an outer diameter of 4 inches. This is a 1 inch version. There is also a 1/2 inch version with the same diameter, # TA25722-90F00.
    view full answer...
  • What Spacers are Available To Accommodate a 6" Lift on My 1995 Ford F-250
    Depending on the size of the bolt on your 1995 Ford F-250, we have a couple of options for spacers. Timbren does recommend 1/2" to 1 1/2" clearance between your Timbren and the contact point when the truck isn't under a load. The spacer is a solution if there is more than that clearance. If your bolt is a 1/2" bolt you will need the Timbren 1" Spacer For Raised Frame Vehicles - 1/2" bushing # TA25723-90AD00 or the Timbren 1/2" Spacer For Raised Frame Vehicles - 1/2" bushing # TA25722-90F00. If...
    view full answer...
  • Rear Helper Springs for a 2006 Toyota 4Runner with 1 Inch Rear Lift Kit
    If you are getting a lift kit on your 2006 Toyota 4Runner then air bags that fit inside the coil springs are not going to work. There are no spacers to make up for the additional space created by the lift kit for the coil spring air bags. The exception is if you were to have a body lift instead of a suspension lift since in that case there would not be any extra space. There are spacers available for the Timbren systems though so I recommend going with # TTORSEQ. If the lift kit does add...
    view full answer...
  • 2018 Jeep Rubicon Unlimited Suspension Enhancement Recommendation
    The Timbren suspension kit part # TABSJRJK that you referenced would be the correct enhancement kit for your 2018 Jeep Rubicon Unlimited but since you also have a lift kit you'll need spacers: 1/2" Spacer - # TA25722-90F00 1" Spacer - # TA25723-90AD00 Since you have a 2.5 inch lift you'll need 2 one inch spacers and a 1/2 inch spacer per side.
    view full answer...
  • Height of Timbren # TTORSEQ and Spacers Needed for Lifted Truck
    I went out to our warehouse and measured an overall height with the mounting bracket of 5 inches for the Timbren Rear Suspension Enhancement System # TTORSEQ. Timbren recommends having a 1/2 inch to 1-1/2 inches between the spring and the axle when the truck is empty so if you measure between the frame where your bump stop is mounted and the axle and get greater than 6-1/2 inches you will want to fill that gap with a spacer or two. We have 1 inch Spacers with # TA25723-90AD00 or 1/2 inch...
    view full answer...
    Image 1 for
  • Spacer For Suspension Enhancement For Lifted 2015 Toyota 4Runner
    There is an option to add spacers to suspension enhancement for your lifted 2015 Toyota 4Runner, but not with SumoSprings. What you'll need to get are Timbrens, which replace your bump stops to offer the same type of added support as you're towing. So the correct fit for your '15 4Runner, as well as the available spacer options, are as follows: - Timbren Rear Suspension Enhancement System # TTORSEQ - Timbren 1" Spacer For Raised Frame Vehicles # TA25723-90AD00 - Timbren 1/2" Spacer For...
    view full answer...
  • Recommended Suspension Enhancements for a 2016 Toyota 4Runner TRD
    Yes, the Timbren Rear Suspension Enhancement System part # TTORSEQ will fit your 2016 Toyota 4Runner TRD. I called my contact at Timbren to confirm this. I also recommend the Timbren 1/2" Spacer For Raised Frame Vehicles part # TA25722-90F00 to offset the lift on the TRD models. The Firestone Coil-Rite Air Helper Springs part # F4135 will also work with your 2016 Toyota 4Runner TRD. The main difference between these and the jounce springs is that they are adjustable which means you can...
    view full answer...
  • Suspension Enhancement for 2011 Toyota 4Runner with 3.5 inch Lift
    We have suspension enhancement that can fit your 2011 Toyota 4Runner with a 3.5 inch lift but not an air bag setup. Instead you'd need the Timbren kit part # TTORSEQ with lift spacers # TA25722-90F00 for 1/2 inch and # TA25723-90AD00 for 1 inch. You'd need a total of 6 inch spacers and two 1/2 inch spacers. The air bag kits that fit your vehicle fit in the coil of the suspension which there isn't a way to use a spacer with.
    view full answer...
  • How Tall Is The Timbren Rear Suspension Enhancement TGMRG35 For 2017 Chevy Express Van?
    I had our warehouse measure the Timbren Rear Suspension Enhancement System # TGMRG35 you were looking at for your 2017 Chevrolet Express Van and the rubber portion measures 5-1/8" tall as shown in the included diagram. You can use spacers with these springs which are the 1/2" spacer # TA25722-90F00, or 1" spacer # TA25723-90AD00 though you should not need them unless you have lifted your van. If you need the spacers you will need to find a longer Grade 8 1/2" diameter T-Bolt from a local...
    view full answer...
    Image 1 for
  • Will the Timbren Suspension Enhancement Work on my Lifted 1998 Chevrolet Suburban?
    You can in fact use the Timbren Rear Suspension Enhancement System part # TGMRSB4 on your lifted Suburban. They have spacers specifically designed for this situation. They are available in 1' and 1/2" sizes and the trick is to get the Timbren to sit between 1/2" to 1 1/2" off of the axle. All lift kits are different so to tell you exactly what you will need is impossible. But you will a couple for sure. Timbren 1" Spacer For Raised Frame Vehicles part # TA25723-90AD00 Timbren 1/2" Spacer...
    view full answer...
  • Recommended Spacer Kit For A Timbren Rear Suspension System On A 2021 Ram 1500
    We carry the Timbren 1" Spacer For Raised Frame Vehicles # TA25723-90AD00 which will help get you back into tolerance. We also carry the Timbren 1/2" Spacer For Raised Frame Vehicles # TA25722-90F00 if you'd like to get closer to the 1/2" mark and have the Timbrens activate sooner.
    view full answer...
  • Recommended Timbren Rear Suspension Enhancement for 2015 Jeep Wrangler Unlimited with 4
    We have spacers that you can add to accommodate a 4" lift on your 2015 Jeep Wrangler Unlimited, but there are no Timbren kits available that come preset for a 4" lift. If your Wrangler Unlimited is a 4WD then I recommend going with the Timbren Rear Suspension Enhancement System # TJRJK. If you have a 2WD then you will want the part # TABSJRJK instead. You can accommodate your lift by choosing a combination of the following spacers for raised frame vehicles: 3/8" Bushing 1/2" Spacer -...
    view full answer...
  • Will Timbren Rear Suspension Enhancement System Fit 2008 Ford F-250 With 8 Inch Lift
    The Timbren Rear Suspension Enhancement System # TFR250SDF will fit your 2008 Ford F-250 but you may need quite a few spacers. You will need to measure from the frame to the axle where the Timbren would install to find the correct spacers. Timbren recommends 1/2" to 1" of clearance between the axle and the Aeon rubber spring. The height of this kit with the included spacer is 7-3/4" so you will need to subtract 8-1/4"-8-3/4" from your measurement which will tell you how many spacers you...
    view full answer...
  • How Many Lift Spacers are Needed for Timbren Springs on a Lifted 2013 Chevy Silverado 1500
    Finding the correct spacer(s) for a lifted truck can be a little tricky sometimes due to the number of lift kits out there. The best way to determine how many spacers you need for the Timbren Suspension Kit, # TGMRCK15S, for your 2013 Chevy Silverado 1500 is to measure the distance from the underside of your frame where your bump stop sits to the axle directly below where the spring makes contact. The spring and bracket in this kit measure 5 inches tall unloaded and the spring should...
    view full answer...
    Image 1 for
  • How to Prevent Sag While Towing with a Lifted 2013 Toyota FJ Cruiser
    As long as you are using the factory coil springs on your 2013 Toyota FJ Cruiser then the 2-1/2" lift kit you have in the rear will not be a problem. If you have a set of taller/stiffer aftermarket coil springs then you would need to test these for yourself as the manufacturer does not test fit with aftermarket coil springs, just the factory ones. If it turns out that you do have aftermarket coil springs and the airbags won't work then we still have an option for you in the Timbren Rear...
    view full answer...
  • Timbren Rear Springs and Spacers for Lifted 2019 Ram 1500 2wd New Body Style Bighorn
    The Timbren Rear Suspension Enhancement System # TDR1500DQ has an overall height of 5-1/2 inches as you can see at the 1:45 minute mark of the attached video. For spacers you can use Timbren 1" Spacer For Raised Frame Vehicles - 1/2" bushing # TA25723-90AD00 or 1/2 inch spacer # TA25722-90F00. This will require a longer 10mm bolt grade 8 for any additional height. You don't want the complete distance to be filled with the spring and spacers because it will give you a rough ride when there...
    view full answer...
  • Spacers To Use with Timbren Kit that Fits 2020 GMC Sierra 1500
    You'd need to use the 1/2 inch bushing diameter spacers like the part # TA25723-90AD00 for a 1 inch spacer or # TA25722-90F00 for 1/2 inch diameter with the Timbren kit part # TGMR15MR.
    view full answer...
  • What Is the Correct Size Timbren Spacer for a 2018 Ford F-150
    The Timbren Rear Suspension Enhancement System for your 2018 Ford F-150 is part # TFR1504E which uses an M10 bolt to attach the spring to the bracket. Therefore, you will need to use the Timbren Spacer part # TA25722-90F00 for 1/2" or part # TA25723-90AD00 for 1" which both have a 1/2" bushing.
    view full answer...
  • Bump Stops for a Timbren Rear Suspension Kit on a Lifted 2020 Chevy Silverado 1500
    The best way to determine how many spacers you need for the Timbren Suspension Kit item # TGMRCK15S, for your 2020 Chevy Silverado 1500, is to measure the distance from the underside of your frame where your bump stop sits to the axle directly below where the spring makes contact. The spring and bracket in this kit measure 5 inches tall unloaded and the spring should sit about 1 inch above your axle once it is installed with no load in the truck. From here, measure the frame to axle distance...
    view full answer...
  • Suspension Enhancement For My 2016 Ram 1500 With A 4.5 Inch Lift
    When it comes to installing a suspension enhancement system on your 2016 Ram 1500 The Timbren Rear Suspension Enhancement System # TDR1500DQ will work for you. This system has a 8,600 pound capacity and improves suspension, handling and safety. It also provides additional support as needed, so you always get a smooth, comfortable ride. This system increases stability and reduces vehicle sag. When it comes to getting the correct spacer kit for your lift you first need to measure the...
    view full answer...
    Image 1 for
  • Suspension Enhancement to Help Sag of 2016 Toyota Tundra With Lift
    To help with the sag of your 2016 Toyota Tundra I recommend going with Timbrens, as they are designed to take the brunt of the added weight when you tow. They will engage when needed to counteract both sag and body roll to help level your truck, while also stabilizing it to help combat sway. You'll need spacers as well, but first, the correct fit for Timbrens on a 2016 Toyota Tundra are the following: - Timbren Suspension Enhancement System # T62FR The springs and bracket have a total...
    view full answer...
  • Recommended Helper Springs for 2012 Nissan Titan Pro-4X
    I'm really glad you asked because we only have one confirmed fit for the Pro-4x model. It is the Timbren Suspension Enhancement System - Rear Axle # TNRTTNB which is a jounce style enhancement rated for 6,000 lbs load support. It will give you a progressive support as it provides additional support as needed to increase stability while reducing body roll and vehicle sag. It will not change the factory ride when not hauling a load, but will engage as needed for payload and towing.
    view full answer...
  • Is There A Spacer Available For A SumoSprings Solo Helper Spring On A 2019 Nissan Titan
    As you mentioned your 2019 Nissan Titan being a work truck there will be another option, but there is no spacer available for the SumoSprings Solo Custom Helper Springs # SS95GR, unfortunately. With that said, as the # SS95GR is rated to 1,500 pounds of capacity, you may want to go with a higher rated product, like the Timbren Rear Suspension Enhancement System # TNRTTN. This will have a 6,000 pound capacity and will do a better job for getting rid of the sag, but I do have to mention...
    view full answer...
  • Timbren Suspension Enhancement Compatibility for Lifted 2017 Ram 1500
    The Air Lift AirLift 1000HD Air Helper Springs for Coil Springs - Rear # AL60818HD is a great product for your 2017 Ram 1500 but it doesn't account for the lift. The Timbren Rear Suspension Enhancement System # TDRTT1500 will work for your truck but you will need to use spacers to account for your lift if it is a suspension lift and not a body lift. The Timbren 1" Spacer For Raised Frame Vehicles - 1/2" bushing # TA25723-90AD00 and the Timbren 1/2" Spacer For Raised Frame Vehicles - 1/2"...
    view full answer...


< Previous
12



Do you have a question about this Accessories and Part?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality accessories and parts for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate accessories and part information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Cole B
Installed by:
Cole B
Employee Wilson B
Updated by:
Wilson B
Employee Jenny M
Written by:
Jenny M

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.