Replacement 2 Inch Hitch Adapter for Yakima HighLight 3 Bike Rack

Question

Question:

Hi! Trying to find a hitch adapter sleeve for a 2014 Yakima Highlite 3. The oem item number is 8890230. Cant seem to find it or something else that would work. Any help would be appreciated. Thanks!

asked by: Brian B

0

Expert Reply:

I spoke with my Yakima contact, and was unfortunately told that the 8890230 adapter sleeve is no longer available, but the # Y8890342 which is still available will work.

expert reply by: Mike L

0

Answer 1

The bolt that comes with the #Y8890185 is the same as the #Y8890176. The bolt is a 1/2"-13 bolt that is 4.28" long with 2.5" of threads.

view full answer...

Answer 2

It sounds like you are seeking the Replacement Adapter Sleeve for Yakima HighLite and DoubleDown Ace Bike Racks #Y8890342. Then for the pin you will want the pin and clip #Y8890176. If I misunderstood what you were asking please provide a little more…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 7

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 8

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 9

Hello Sam; that is a great question! I reached out to Furrion and you will be able to use the Furrion Chill Cube #FR69TD (white) or #FR49TD (black) with your furnace. However, the remote is not capable of operating the furnace at this time. Also, we…

view full answer...

Answer 10

Hey Jon; I was actually just talking to Furrion about heat options for the Chill Cube yesterday (1/21/2025). At this time, the only way to have heat with this unit is through a furnace on a ducted setup. The Furrion Chill Cube RV AC w/ Air…

view full answer...

Answer 11

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 12

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Replacement 2 Inch Hitch Adapter for Yakima HighLight 3 Bike Rack

Product Page this Question was Asked From

Continue Researching