Parts Needed to Convert to 3,500 lb Over-The-Hub Disc Brakes
Updated 11/29/2021 | Published 11/28/2021 >
Products Featured in This Question
Question:
Hi, I plan on converting my trailer to disc brake system. I have Continental cargo trailer 2990 LB and i have no idea what i need to buy. What disc brake system should I buy that will fit my trailer? Im looking for all the parts I need - brakes kit, hydraulic line, grease cap ...
asked by: Waldek
Expert Reply:
Thanks for the photos, and based on them we do have what you need, which are over-the-hub disc brakes. The only thing you will need to verify is that you have a 5 on 4-1/2" bolt pattern on your hub; it looks like you do but you'll want to be sure by measuring from the center of your hub's wheel stud hole to the farthest edge of the opposite stud.
If that measures 4-1/2 inches you have a 5 on 4-1/2" bolt pattern. I have also added a link below to a printable bolt hole template. Assuming you do have that bolt pattern, since you also have a 4-bolt brake mounting flange, the correct disc brake kit is the following:
- Kodiak Disc Brake Kit - 10" Rotor - 5 on 4-1/2 - Dacromet - 3,500 lbs # K2R35D
You will also need a brake line kit, like you mentioned, the Kodiak Hydraulic Brake Line Kit - Single Axle - 15 foot # 15SI-BLKIT or 18 foot # 18SI-BLKIT.
And while you mentioned a grease cap, that is not needed with an over-the-hub disc brake kit; the only other thing you might need if you don't have one is a surge brake actuator designed for disc brakes. Since you have an A-frame the only options we offer for that are the weld-on Demco Hydraulic Brake Actuator - 12,500 lb capacity # DM8105422 or 20,000 lb capacity # DM8205222, which will also require the Coupler # DM05823-95.
Product Page this Question was Asked From
Demco Hydraulic Brake Actuator w/ Lockout - Disc - Primed - A-Frame - 8" Channel Center - 12.5K
- Brake Actuator
- Surge Brake Actuator
- Construction Trailer
- Farm Trailer
- Weld-On
- 12500 lbs GTW
- Channel
- A-Frame Tongue
- Disc Brakes
- Electric Lockout
- Demco
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Search Results: fulton f2 jack
- Search Results: fulton jack
- Search Results: trailer light
- Search Results: 8k trailer brakes
- Shop: Brake Controller
- Q&A: Replacement Jack that Fits the Weld On Mounting Bracket for Fulton F2 Jacks
- Shop: Trailer Wiring
- Shop: Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Shop: Dutton-Lainson Boat Trailer Jack w/ Wheel - Sidewind - Swivel - 12" Lift - 1,700 lbs
- Search Results: fulton swing tongue
- Search Results: spring latches
- Shop: Curt Venturer NEXT Trailer Brake Controller w/ Custom Harness - Up to 3 Axles - Time Delayed
- Search Results: 10k seal
- Shop: Dexter 3/4" x 4-1/2" Spring Eye Bolt for 10K General Duty Slipper Springs
- Shop: Unitized Oil Seal - I.D. 2.875" / O.D. 3.880" for Select 9K-10K Dexter Axles - Qty 1
- Shop: Unitized Oil Seal - I.D. 3.125" / O.D. 4.500" for 10K to 16K Heavy Duty Axles - Qty 1
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Shop: Trailer Hitch
- Article: Trailer Wiring Diagrams
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Video: Redarc Tow-Pro Liberty Brake Controller Review RED24FR
- Shop: Suspension Enhancement
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: How to Measure for Trailer Hitch Drop
- Video: Feature Breakdown: Universal Installation Kit for Trailer Brake Controller
- Q&A: Comparing Kenda KR03, KR35, And KR53 Tires
- Video: The Low-Down on the Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector






