Product Experts Available Now!
Call 1-800-940-8924
Dutton-Lainson Boat Trailer Jack w/ Wheel - Sidewind - Swivel - 12" Lift - 1,700 lbs
(385 reviews)
Price: $354.52
In Stock
We'll connect you with nearby partnered installers who know this exact setup.
Dutton-Lainson Boat Trailer Jack w/ Wheel - Sidewind - Swivel - 12" Lift - 1,700 lbs
Part Number: DL22339
In Stock
$354.52
Retail:$373.33
You Save: $18.81
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
We'll connect you with nearby partnered installers who know this exact setup.
- All Info
- Reviews (385)
- Q & A (0)
- Photos
Dutton-Lainson Trailer Jack - DL22339
Highlights
- 1,700-Lb Capacity: 12" lift handles heavy tongue loads for steady lifting and lowering.
- Easy Trailer Moves: 8" x 3-3/16" wheel turns 360° for smooth maneuvering in tight spaces.
- Corrosion Ready: TUFFPLATE zinc plus matte black powder coat resist rust, even in saltwater.
- Quick Position Swivel: Pull-pin handle swings jack up or down fast without tools or fuss.
- Protected to Last: Covered housing shields pull-pin and swivel parts from grit and weather.
- Stable on Any Surface: Extra-wide wheel distributes weight to prevent sinking on soft ground.
Features to know about
Easier Trailer Maneuvering: 8" x 3-5/16" Wheel Rolls Smooth and Stable
Getting a loaded trailer to move by hand can be a chore, especially on gravel or soft ground. The Dutton-Lainson sidewind swivel jack uses an extra-wide 3" wheel that turns a full 360 degrees to make positioning easy. The wider surface keeps it from sinking in and gives you much better control, whether you’re rolling across a garage floor or pivoting into a tight spot. With a 1,700-lb lift capacity and smooth-cranking handle, it moves heavy trailers without a struggle.
Built to Take the Elements: TUFFPLATE Zinc and Powder Coat Protection
Saltwater and road spray wreak havoc on most jacks, but this one’s built for the long haul. The inner tube has a TUFFPLATE zinc finish with a 500-hour salt spray rating, sealed to keep corrosion away. The outer tube adds another layer with a matte black powder coat that stands up to UV exposure and rough weather. Drain holes at the bottom of the post keep water from pooling inside, so the jack stays clean and functional through seasons of use.
Smarter Design: Protective Housing and Smooth Swivel Action
Most swivel jacks leave the pull-pin exposed to rust and grit. This Dutton-Lainson design hides the pin and swivel components inside a protective plastic housing that keeps moisture and dirt out. The result is a jack that swings up and down smoothly and locks solidly with its 1/2" pin. The sidewind handle is easy on your knuckles, and the solid steel construction gives it a confident, heavy-duty feel every time you use it.
Quick Mount and Confident Support: Bolt-On Bracket with Backing Plate
Installation is simple with the included mounting bracket and hardware that bolt around trailer frames up to 3" tall x 4" wide. The backing plate gives the mount extra strength and stability, preventing flex under load. With 12" of lift and bracket heights from 18-7/16" retracted to 30-7/16" extended, it gives you the reach you need for smooth hook-ups and steady parking.
Long-Term Dependability: Heavy-Duty Steel You Can Trust
Reviewers call it sturdy, solid, and built extremely well—and it shows. The steel frame, corrosion-resistant finish, and precise fit make this jack a long-term upgrade over lighter models. Every piece, from the 6-1/8" handle radius to the 8" diameter wheel, is built for strength and ease of use. It’s a dependable, heavy-duty jack that handles real-world use day after day without complaint.
Specs
Application
- Application: trailers frames up to 3" tall x 4" wide
Weight and Capacity
- Lift capacity: 1,700 lbs
Dimensions
- Bracket height (from bottom of wheel to top hole of bracket), retracted: 18-7/16"
- Bracket height (from bottom of wheel to top hole of bracket), extended: 30-7/16"
- Lift: 12"
- Pull pin diameter: 1/2"
- Outer tube diameter: 2-1/2"
- Handle radius: 6-1/8"
- Wheel dimensions: 8" diameter x 3-5/16" wide
Warranty
- Warranty: 3-Year limited warranty
22339 Dutton-Lainson Trailer Jack w/ 8" Wheel - Sidewind - Swivel - Bolt On - 12" Travel - 1,700 lbs
DLx-SW Series trailer jack
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- Arrived Damaged
- Product did not meet expectations
- Wrong item was ordered
Ratings & Reviews
4.7
385 reviews
by:
Jon
08/02/2026
Arrived within two days of ordering. Quality jack, looks better than the Fulton F2 jack it replaced on 2015 boat mate dual axle trailer for Malibu 23 LSV boat. Black color matches trailer. Installed with parts supplied within 30 minutes of arrival. No other parts needed. Fits 5” tall frame, by turning plate to vertical position vs horizontal. Placed over the weld plate that was previously installed for the original Fulton F2, so it’s in the same location as the original jack.
by:
Charles
09/05/2026
The box was extremely dirty and the product was dirty as well…almost like it was used… wiped it off and installed on boat trailer. Very disappointing for a higher price point, there is no boat on the trailer so the tongue weight is well below the 1,700 pounds this is rated at and getting the wheel to pivot/rotate is extremely difficult…very poor product considering it’s supposed to be heavy duty. Either mine is faulty or it’s just a bad product. I would not recommend to anyone.
by:
Chris
03/31/2026
I had to replace my Fulton F2 with a new trailer jack. The Dutton-Lainson was the one I chose. It had good reviews and so far I am very happy with the product. It is heavy duty built and looks like it will last a long time. The only 2 minor issues I have is it is geared slower than the Fulton, and it is not adjustable like the Fulton. I lucked out and have about an inch of space when using the handle on the lift, and the speed is probably due to lower gearing, hence the better, heavy duty build. So far I am very please with my purchase and would recommend anyone looking to replace their trailer jack to look at the Dutton-Lainson line of trailer jacks.
by:
Kelly
06/09/2025
Very sturdy out of the box and mounted on my trailer
Kelly
6/10/2026
THIS JACK IS HORRIBLE! After about 1 year of use, it stopped going up and down altogether. My boat mechanic had to take it off and replace it. I will NEVER buy from Dutton-Lainson again!!!!!!
by:
Kevin
06/06/2026
This rack is worth every penny. Well built and cranks up like a dream. I have 1200lbs of tongue weight and it handles it effortlessly. Highly recommend this product
by:
Robert
07/27/2026
Great product was replacing the OE that got damaged. Installation was easy looks great
by:
Piers
09/02/2026
Very heavy duty
by:
John
03/30/2026
Very heavy duty, just what I needed.
by:
Mairlyn
08/12/2026
Will was a great help on the purchase we needed for the company. We got the purchase 2day..
Thz again
Thz again
by:
Dean
02/20/2026
Very nice jack no problems mounting
by:
Gary
08/21/2025
Nice Product. The staff at etrailer were essential in helping me choose the best option for my 1999 DHM Trailer. Thanks!
by:
Randy
04/15/2020
Perfect fit. Much better jack than the OEM.
Randy
4/16/2021
Jack is awesome! Supports my boat very well. Extremely easy to roll in and out of my garage.
by:
Highland-Gilly
05/06/2026
This thing is built bombproof and does the job I need it to do. However, even though this was the one recommended to me for my particular boat, it doesn’t allow my boat trailer to go down low enough to sit on the hitch, it bottoms out. I believe this may have been built for a tow truck with these 35 inch tires that sit as tall as a fire truck which I don’t have or want. Anyhow, I suppose I should call and see what can be done.
James D.
5/11/2026
We apologize that happened and thanks for reaching out! Someone from our customer service department will be reaching out to see what we can do to help.
by:
Dustin
07/11/2024
I bought this jack to replace the jack (also a Dutton-Lainson) that came with my brand-new Aluma trailer. Aluma had drilled the jack bolt holes through the tongue from factory (and not very straight, to boot), but secured them on the backside with washers and nuts (no backing plate). The fact that this jack includes a backing plate was a major plus for me as it will provide a much more mechanically sturdy mount of the jack to the trailer tongue. Additionally, the wheel on the factory jack was very narrow and was sinking into my gravel driveway fairly quickly. The wheel on this new jack is much wider and seems more stout.
In short... This is a huge upgrade from the jack that came with my trailer. I did have to go to the hardware store for shorter 7/16-14 bolts because the ones that came with this jack were too long, but that's not the fault of this product; they include hardware that is most likely to satisfy a majority of customers.
The pivot action on the jack is extremely smooth, as is the crank. I'd like to try and adapt this for a drill, but even if I can't make that work, this jack is going to serve me very well.
The build quality is outstanding and I really can't find any way to fault this product. I'm glad to have the much wider wheel and the backing plate which provides for a much sturdier mount to the Aluma's tongue. The jack is also fully serviceable with repair parts available and a full exploded parts diagram included.
In short... This is a huge upgrade from the jack that came with my trailer. I did have to go to the hardware store for shorter 7/16-14 bolts because the ones that came with this jack were too long, but that's not the fault of this product; they include hardware that is most likely to satisfy a majority of customers.
The pivot action on the jack is extremely smooth, as is the crank. I'd like to try and adapt this for a drill, but even if I can't make that work, this jack is going to serve me very well.
The build quality is outstanding and I really can't find any way to fault this product. I'm glad to have the much wider wheel and the backing plate which provides for a much sturdier mount to the Aluma's tongue. The jack is also fully serviceable with repair parts available and a full exploded parts diagram included.
by:
Matthew
10/24/2024
It has been a great improvement to my boat trailer. It doesn’t go as low as my last hitch so I had to make some modifications but it is smooth and rolls nicely.
by:
Mark
03/09/2020
Quality product and arrived almost entirely put together in the box. Bolting the side plate and jack onto the trailer only took a few minutes and it's very sturdy. Very little effort needed to crank it up and down. I have a 26' center console with about 500lbs of hitch weight and with the oversized wheel had no problem moving it around in the garage. Heavy pin and spring to lock it in the up position when traveling and down position when in use. LOVE the black color as it matches my trailer. Highly recommend.
by:
Douglas
09/10/2025
Super strong and very capable. Did the job exactly as I needed.
by:
Kelly
01/29/2020
Well I wanted to solid built Trailer Jack with a wheel
And I don’t think I could’ve gotten any better it is well built solid no worrying about it breaking as I am pushing the trailer around! Super satisfied
And I don’t think I could’ve gotten any better it is well built solid no worrying about it breaking as I am pushing the trailer around! Super satisfied
by:
Blake
04/13/2024
Very well made product. Works perfect for 30' pontoon trailer. This will fit 5" tall frame tube. Just need to turn the bracket 90 deg from the normal position of smaller tubes.
by:
Francis
09/12/2022
Product matched description to a tee. High quality and just what my little camper needed for ease of hitching up/down.
by:
Brandon
07/10/2020
Very well built. Got this for my 22' boat. Easy to install the only issue I ran into was either the bolt or the nut threads were bad and had to go to the local hardware store and get a new one. Otherwise, the jack itself is built very well.
by:
Mark
05/06/2023
Tried many others and they failed but this Dutton Lainson has never failed yet.
by:
Elizabeth
06/28/2023
This jack is robust and tolerating the salt well. A good solid jack makes a big difference when moving the trailer around the yard by hand.
by:
Anthony
01/08/2024
Love this jack and always like shopping w etrailer.
by:
Trent
07/12/2022
Fast delivery, item is exactly as advertised. They also honored their price pledge guarantee.
25
385
true
Show More Reviews
See what our Experts say about this Dutton-Lainson Trailer Jack
- Measurement From Bottom of Wheel To Center Of Bracket When Extended on Dutton-Lainson JackHi Matt; the distance from the bottom of the wheel to the center of the bracket when # DL22339 is retracted is 16-7/16". Since it has 12" of travel it will be 28-7/16" when fully extended. Is this for your boat trailer or something else?
view full answer... - Can Dutton Lainson Trailer Jack be Used on Road King TrailerHey Rod, the Dutton Lainson jack part # DL22339 can work for you if you are okay with welding it to the trailer but the mounting brackets that come with it are not large enough to fit the frame dimensions you mentioned so it would not work installed that way. Is welding an option for you?
view full answer... - Will Dutton-Lainson Boat Trailer Jack w/ Wheel Fit 3" x 5" Trailer TongueHi Jeff; the Dutton-Lainson Boat Trailer Jack w/ Wheel # DL22339 is designed to fit a 3" tall x 4" wide trailer tongue. It is possible to use it with a 5" wide trailer tongue but you will likely need to acquire longer bolts locally to accommodate the extra width since the included hardware is designed for a 4" wide tongue. What trailer are you setting this up on?
view full answer... - Recommended Replacement for a Dutton-Lanison 1.5k lb Trailer Boat JackYes Brad, that absolutely makes sense. There’s a good chance you can reuse the Dutton-Lainson welded swivel mount already on your Boatmate trailer. The Dutton-Lainson # DL22339 uses a standard swivel-mount design, I attached a photo of the mounting holes on the bracket. 5-1/2 inches from left to right 2-3/8 top to bottom row What style of boat are you launching from your trailer?
view full answer... - Can You Add a Wheel to the Dutton-Lainson Boat Trailer Jack w Footplate DL22340?Hey Ken. I checked with the manufacturer and the Dutton-Lainson Boat Trailer Jack w Footplate item # DL22340 does not have an optional wheel kit. It's the DLX-SF model. The Dutton-Lainson item # DL22339 is the DLX-SW model that comes with the wheel setup. It's got a completely different down tube to attach the wheel mount. Do you already have the Dutton-Lainson Boat Trailer Jack w Footplate item # DL22340? You can add this information and any other questions you have where it says Reply...
view full answer... - Recommended Adapter to Attach a Dutton-Lainson Boat Trailer Jack to a Fulton F2 Weld-On BracketThere sure is Jacob! To attach the Dutton-Lainson Boat Trailer Jack item # DL22339 to your boat trailer's welded on Fulton bracket, you'll need the Dutton-Lainson Adapter Plate for Fulton F2 Weld-On Bracket item # DL44DR. This adapter will bolt directly to the weld on Fulton bracket so you can attach your new jack without having to add new brackets. The Dutton-Lainson Adapter Plate for Fulton F2 Weld-On Bracket item # DL44DR works with DLx, DLx-P, DLx-SW, DLx-SF, 6430, 6800, 6850, and...
view full answer... - Should Dutton-Lainson Jack Allow Boat and Trailer To Move Around on Smooth and Level ConcreteHi Kyle; under those conditions I would expect you to be able to move the boat and trailer around using the # DL22339. However, if your boat is excessively heavy it may not perform as well. I doubt you're pushing the limits of its capacity but if you are that would explain it. I would also consider if you're trying to make a sharp turn or pull straight ahead. The single wheel can be a real pain if you're trying to take it into a turn from a dead stop with a lot of weight on it. What I...
view full answer... - Mounting Hole Dimensions of Dutton Lainson Sidewind Jack # DL22339I attached a picture that has the measurements of the mounting holes on the mounting plate of the Dutton Lainson Sidewind jack # DL22339 that you referenced. Basically they are 5-1/2 inches from left to right and then 2-3/8 top to bottom row and then an additional inch for each of the others.
view full answer...
- Are There Any American Made Trailer Tongue Jacks Available?We do indeed carry American made jacks. You will want to check out the Dutton-Lainson line. All of their jacks are made here except the Model 7201 # DL22320 and Model 3400 # DL22300. With that said, if you are specifically looking for an A-Frame jack, you will want to check out the Dutton-Lainson A-Frame Trailer Jack - Topwind - 5,000 lbs. # DL22772. This will have 14" of lift , but does not include a foot plate. If you prefer a foot plate, you will want the # DL22542, but if you wanted...
view full answer... - Can Wheel Be Added To Fulton XLT Powered Drive Trailer Jack F141401?I may have a different option for you, but there is not a wheel kit available for the Fulton XLT Powered Driver Trailer Jack # F141401 you were looking at. The above jack is the only powered side mount jack offered but since no wheel is available you will need to decide on if you want a wheel or the power jack. If you decide having a wheel is more important I recommend the Dutton-Lainson Square Swivel Jack w/ 3" Wide Wheel - Sidewind - 12" Lift - 1,700 lbs # DL22339 due to it having the...
view full answer... - Jack With Wheel Compatible with 500 Gallon Water Tank TrailerFor your trailer, the best option for a wheel is the Trailer Valet 5X Swivel Jack and Trailer Mover # STC-V211. This is rated for up to 5,000 lb trailer with 500 lb tongue weight. This is due to the pneumatic dual tires. Most trailer jacks with wheel are only rated for about a 1600 lb capacity maximum due mostly to the plastic wheel. The Dutton-Lainson Square Swivel Jack w/ 3" Wide Wheel - Sidewind - 12" Lift - 1,700 lbs # DL22339 is the most heavy duty option we offer other than the...
view full answer... - Can the Bulldog Round, Weld-On Jack's Foot be Swapped with a WheelWe do have jacks that have a wheel instead of a foot. However, the Bulldog Round, part # BD151159, does not have the capability to swap the foot for a wheel. In fact, none of our jacks with drop-down feet can be swapped for wheels. Instead, you would have to use one that already has a wheel attached. Of course, those with the wheel have lower weight capacities and make use of a hand crank rather than electricity like the Bulldog Round. If that's the route you would like to take, I recommend...
view full answer... - Looking for the Replacement Handle for Dutton-Lainson Sidewind Style Trailer JacksHappy to help Austin, For your Dutton-Lainson jack # DL22339, the replacement handle for sidewind style trailer jacks is # DL22448. Is the handle the only part that's damaged or are you also needing the roll pin or any other hardware?
view full answer... - Can The Dutton-Lainson Strong Arm Power Drill Adapter DL92CR Work On The DL22339 Jack?Hi Randy! You can indeed use the Dutton-Lainson Strong Arm Power Drill Adapter for Manual Jacks - 1.5K to 2K # DL92CR with your Dutton-Lainson Boat Trailer Jack w/ Wheel - Sidewind - Swivel - 12" Lift - 1,700 lbs # DL22339. We have actually done this install before and I have an included picture attached to this answer. I also included an install video that will help get it installed (it is a bit of work, but not too bad). What kind of trailer do you have this installed on? Most people...
view full answer... - Do you sell a replacement wheel F2 single wheelI wish we could but we can't get the Fulton replacement parts anymore as they are currently no longer in business.
view full answer... - Length of Handle on Dutton-Lainson Square Swivel Jack DL22339I checked with the manufacturer, and the length of the handle is 7 inches on the Dutton-Lainson Square Swivel Jack w/ 3" Wide Wheel # DL22339.
view full answer...
Do you have a question about this Trailer Jack?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Jameson C
Edited by:
Tyler C
Video Edited:
Jacob T
Video Edited:
Kathleen M
Video by:
Chris R
Updated by:
Wilson B
Updated by:
Alex H
Updated by:
Carrie F
Updated by:
Ryan F
Written by:
Matthew S
Installed by:
Jacob H
Installed by:
Andy C
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Christopher H.
8/4/2026
Glad you like the jack Jon and thanks for the feedback. Really appreciate you taking the time to add a photo of your setup. Have fun this summer!