Is There a 7 Way Bracket Available for the Draw-Tite 76253?

Updated 07/27/2021 | Published 07/24/2021

Products Featured in This Question

Mounting Bracket for 7-Way

(530)

$9.39

Curt Mounting Bracket for 7-Way Connector Plug

(314)

$6.00

Question:

I installed the old under-bumper Curt hitch back when it was the only aftermarket hitch on etrailer for the Ascent. I tow a fairly heavy tongue weight camper, and the ground clearance at the riser hitch it terrible. Also, that Curt has no mount for a 7-way rv plug so its pretty rigged up. I dont see any pics etc of the mount on the Draw-Tite. Want to make sure Ill be able to mount the 7way to the little mount plate on this hitch bar. Thx!

asked by: Ryan K

Expert Reply:

To add a 7 Way wiring harness to the Draw-Tite # 76253, you will need the Draw-Tite Mounting Bracket # 18138. This will attach to the included no drill bracket already on the hitch, making it an easy install. However, this bracket does not work with Curt 7-way plugs. If you have a Curt 7 Way plug, you will need to use the # C67UR instead

expert reply by: Lazer S