Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Mounting bracket for 7-way standard connectors. Includes screws and nuts.
Features:
Specs:
Note: Does not work with Curt 7-way plugs, use C67UR instead.
For a no-drill option, use this part with the Short Bracket (#18140) or Long Bracket (#18136). Clamp the short or long bracket to the hitch and attach the trailer connector mount to the no-drill bracket. A few Draw-Tite and Hidden Hitch Class III, IV and V trailer hitches have the no-drill brackets already installed on them.
California residents: click here
Average Customer Rating: 4.4 out of 5 stars (521 Customer Reviews)
Mounting bracket for 7-way standard connectors. Includes screws and nuts.Fits perfectly. Uses the existing bracket mount on the hitch (Sprinter passenger van version)
Good sturdy bracket. The holes did not line up with my 7 way electrical connector. I fixed it by drilling new holes and now everything is attached securely.
I read several reviews beforehand that stated the bracket is a little thin and would flex when connecting the trailer lights, so I ordered two of these and coupled them together to make it a stronger bracket. (Just have to open up the corresponding holes in one of the brackets so the screws will still feed through. Now it's much stronger and won't bend at all when making a connection. I decided to mount the bracket sitting on top of the bracket weld of my Draw-tite hitch so that it didn't hang so low below the hitch and risk getting damaged coming off a curb or hitting a low spot in the road. I have a 2011 Toyota Highlander and used an Exacto knife to cut out some of the plastic body panel so the harnessed wiring would fit through. Looks almost factory style to me. And it works great!
This did not fit the factory connector despite etrailer's recommendation of it. My mechanic was able to modify the factory bracket to fit the hitch at a reasonable cost. When I tried to return the item etrailer would not provide a shipping label because the shipping cost was more than the item cost. I asked for a credit and they would only provide one if I returned the item at my expense.I found this to be unacceptable and will no longer do business with them. They are a definite outlier on this, in my experience.
I modified the bracket to facilitate installation of 7 prong adapter on 2006 Expedition. Had to use some heat to change the angle to 45 degrees, and cut a couple slots for the clamps, but works when nothing else did. Clamped directly onto the tow bar, and still sturdy after 800 miles.
Chris
6/20/2019
One year out still solid.
Does a great job securing my 7-way connector! I especially like that was mountable using zip-ties and did not require me to drill into the reciever assembly.
This fit perfectly on my new hitch. It was easy to mount and mount the plug into. It fit my needs and was shipped with instructions and the support on the etrailer team.
Nice piece but I am now aware that this bracket wasn't compatible with the 7-way kit I installed. I made it work by drilling more holes but be aware, not all brackets work with all 7-way plugs.
Used with Volvo OEM 7-pin/4-pin wiring harness. Mounting holes aligned perfectly, but could not use included screws (too short).
Great service thanks Kathy. Extremely knowledgeable and helpful. Quoted upwards to $1k for installation of hitch and brake controller. Video from etrailer made it easy and saved a ton of $.
This fit the existing bracket on my Curt hitch perfectly. Holds 7 pin trailer connector snugly.
Products exactly like it describe very good quality but does not exact work with out modification
1 Curt 7-way T-connector For Factory Tow Package need to modify it to make it fit
Works well. Could use rustproofing, especially on the attachment bolts.
Hello ,I have not received my hitch yet. I received the wiring brackets. I will review after I have installed my order.....
Bracket and receiver fit perfectly on me 2024 Sprinter 2500 crew.
Great fit and hardware would highly rec ommend
William
4/5/2021
Great no prob
The holes did not line up perfectly with my existing 7-pin connector so I drilled new holes in the connector housing. Seems to be working great so far!
It fit perfectly
You need another bracket to connect this properly to the receiver bar. Would have been nice to know. It also does not work with the 7 way connector because the holes don't match up.
This product was super easy to install and fit perfectly with my 7 pin harness!!!!
Worked well. Had to flip it around and drill a couple of new holes in order to mount the wiring harness and keep it hidden within the bumper enclosure.
A little pricy, but a good quality
easy to install, but not as sturdy as I would like. I find myself having to use both hands to make sure the plug is all the way in.
Bracket was a little difficult to mount where it should go.
Could not use. This is not the correct part for the T-One vehicle wiring harness (118266). The website stated this one fit my Frontier and the part number called out in the wiring harness did not, so I ordered this one. etrailer order checker did not catch it either. I was able to find the correct bracket locally.
Brooke M.
6/27/2022
I have seen that part # PK12711U is a better alternative to this bracket. The oval shaped holes make it more compatible with more harnesses. I am glad to know that found something that worked for you.
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Charles
3/23/2020
Works great!