Does Correct Track Trailer Alignment Kit # RR23QX Come with Enough Brackets for Tandem Trailer

Question

Question:

How many hanger extensions come with this? The picture and description says 8 but it seems to me that 12 are needed for a tandem axle trailer.

asked by: Tim H

0

Expert Reply:

The Correct Track Trailer Alignment and Lift Kit - Tandem Axle # RR23QX does come with all of the components needed to lift a tandem axle trailer. The center hangers of a tandem axle setup use different components than the front and rear hangers since the center has an equalizer which might be why it's hard to visualize how it all goes together looking at the product pictures.

expert reply by: Jameson C

0

Carl

9/17/2024

Hi Jameson, I have the exact same question. You stated that the center hangers for the equalizers use different components, but I don't see anything in the picture of the parts (8 of each) to extend the equalizers. Would you please clarify? Thanks.

Reply

Jameson C.

9/17/2024

@Carl So this is an older question with a different version of the Correct Track that did have different components so that is why the info doesn't seem to match what you see in the pictures.

Reply

John S.

9/30/2024

@JamesonC I just ordered the same kit for the tandem axle trailer (RR23QX). The picture only shows 8 hangers, and in a previous post, the etrailer expert said there should be 12 hangers in the kit. Can you please clarify that this kit has 12 brackets to extend all 6 hangers? Thanks

Reply

Jameson C.

9/30/2024

@JohnS I can assure you that the kit for sure comes with the correct amount of components to lift a tandem axle trailer. I have sent an update to photo department to get current pictures and to verify everything.

Reply

See All (12) Replies to Carl ∨

Doug W.

10/3/2024

Both statements are correct. The difference is the amount of lift you want from the system. If your neighbor wants the full 2" of lift, then another single axle system is required for the center brackets. Otherwise, they get 1" of lift by installing the 2 axle system on the spring hangers but not the center hanger. There should be an * on the lift statement mentioning this requirement.

Reply

Jameson C.

10/3/2024

@DougW Ahhh makes sense. Glad we finally have it straight. Appreciate it!

Reply

John S.

10/3/2024

@JamesonC Thanks for the clarification. I will order the RR55QX kit and return the RR23QX kit when I get a follow up email from your team. I will be needing the full 2" of lift. I do think this needs to be clarified on the website. Thanks John

Reply

Jameson C.

10/3/2024

@JohnS Yes agreed. I sent all of this to the product managers to have this finally all sorted out.

Reply

See All (9) Replies to Doug W. ∨

Answer 1

We have lift kits for trailer that easily add 2 inches to the height of the trailer. For that you'd want the part #RR23QX and you'd be set. I attached a picture that shows how it installs to give you an idea. This would be the easiest…

view full answer...

Answer 2

Hey Bill, welcome back! Did you experience anything in particular like rough roads or do you have some really heavy cargo on that side? Maybe it just gave out over time. Regardless, adding the MORryde X-Factor Crossmember #MR33WR will definitely…

view full answer...

Answer 3

There would need to be two brackets per hanger so the Single axle Correct Track kit #LC87120 would only need four brackets to mount on both sides of the hangers. A tandem axle trailer #RR23QX would have 3 hangers per side and require 12 brackets and…

view full answer...

Answer 4

The lift kits we carry fit with specific axles; the #K71-725-02 is a tandem axle application and will give a 3-1/8" lift and is compatible with side-mounted #12 Torflex axles with 5,500-7,000-lb capacities. If that is what your axle is, this kit…

view full answer...

Answer 5

The Lippert tandem axle lift kit part #RR23QX does not work with your MORryde CRE3000 suspension kit #MR87ZR.

view full answer...

Answer 6

I do still have a few options for lifting the trailer but the Correct Track Trailer Alignment and Lift Kit part #RR23QX is indeed incompatible with the MORryde CRE3000 Equalizers. Therefore, you can either change these out to standard ones like the…

view full answer...

Answer 7

Hey Shawn, is it possible your leaf springs are just worn out and due to that your suspension is sagging and causing the tires to rub? Doing and over under kit and then trying to go with softer springs to offset the additional height would not be…

view full answer...

Answer 8

No, that wouldn't help your clearance issues Kenneth. I do have a solution for you depending on what kind of axles your travel trailer has that will give you additional clearance. There are a couple of options to lift your trailer depending on if…

view full answer...

Answer 9

If you install the Correct Track Trailer Alignment and Lift Kit #RR23QX it will require longer bolts but MORryde makes a kit specifically for this. To find the right MORryde Suspension Upgrade Kit for Tandem Axle Trailers w Correct Track you will…

view full answer...

Answer 10

Thanks for reaching out! The MORryde X-Factor Crossmember for Stock Leaf Spring Suspension with Correct Track MR69ZR was discontinued back at the end of 2022 but you can piece it together using the MORryde X-Factor Crossmember for Standard Frame…

view full answer...

Answer 11

We have heard of people using spacer blocks to raise the height of their trailer along with the over-under conversion kit you referenced or the Tandem Axle Lift Kit #RR23QX and everything seemed to work okay so I would say you can use it to raise the…

view full answer...

Answer 12

The Correct Track Tandem Lift kit part #RR23QX cannot work with the CRE3000 kit you have on your trailer now due to clearance issues so you would need to replace them with like with the EquaFlex part #LC145546 which is also cushioned.

view full answer...