Correct Track Trailer Alignment and Lift Kit Review Video

Hi Greg; leaf springs aren't typically used to raise a trailer. However, if the #EM28AJ matches your current leaf spring measurements, and your current leaf springs are 3-leaf, and the leaf springs are sitting on top of the axle, that would push…

Hello Steve, thanks for reaching out. In my honest opinion, leaf springs are leaf springs. There is not going to be a noticeable difference in quality or longevity between the different brands. As long as the length of the spring is correct and the…

There are a couple of things that you can do to get more ground clearance for your new trailer. First, if the leaf spring stack is attached under the axle then you could use an over/under conversion kit. If the trailer has a 2-3/8 inch diameter round…

I do still have a few options for lifting the trailer but the Correct Track Trailer Alignment and Lift Kit part #RR23QX is indeed incompatible with the MORryde CRE3000 Equalizers. Therefore, you can either change these out to standard ones like the…

Hey Josh! If you have 8,000 lbs torsion axles I do not have a lift kit for you. I do have a couple of options for standard axles though. If your 8,000 lbs axles are mounted above your springs you can use the Dexter Trailer Springs Over-Under…

Hey Richard! How did you measure your current leaf springs to get the 25-1/2" eye to eye measurement? We recommend jacking one side of the trailer up to get the weight off of them before measuring because they stretch out quite a bit over years…

Hey Mark, I looked up the specs of the spring you have now and found that it is a 24-3/4 inch long spring from eye center to eye center and for a 7k axle. So that means that the replacement spring part #EM28AJ that you referenced will work great as a…

Hey Mike, thanks for reaching out! I'm pretty sure your boat trailer has a 3,500 lbs axle which means you should need the Grease Seal #TMK58ZR which has a 1.719" ID and a 2.565" OD - you'll want to verify this on your end. I…

I do have an option for you but changing the shackle strap length will change the whole suspension geometry so that's not recommended unless changing other components such as the leaf springs. Furthermore, 3-1/8" is the longest length used…

The previous generations of the Correct Track had some issues with brackets bending but the current generations like the single axle part #LC87120 and tandem axle #RR23QX have had all of that addressed and fixed.

There would need to be two brackets per hanger so the Single axle Correct Track kit #LC87120 would only need four brackets to mount on both sides of the hangers. A tandem axle trailer #RR23QX would have 3 hangers per side and require 12 brackets and…

I would be happy to help you find the correct replacement springs for your Continental AWC11e Trailer, but unfortunately we do not have a break down of the specific components your trailer uses. To determine the correct replacement spring you will…