Search: correct track   >  

For your 1st question, yes the Dexter Nev-R-Adjust Electric Trailer Brakes #23-464-465 are going to fit the 5 bolt mounting flange on your 7,000lb axle for your 2020 Grand Design Solitude 380FL. For your 2nd question, yes the Trailer Hub and Drum…

The Correct Track used to be made by Lippert but they stopped carrying it and after some time RV Ride Control released the third generation version of it with the part #RR23QX. Like other trailer suspension components like hangers and shackles…

In regards to the Correct Track Trailer Alignment and Lift Kit part #RR23QX, the kit provides a lift by essentially extending the hangers. This normally requires cutting off the old hangers and welding on new, taller ones but with this kit you…

We have lift kits for trailer that easily add 2 inches to the height of the trailer. For that you'd want the part #RR23QX and you'd be set. I attached a picture that shows how it installs to give you an idea. This would be the easiest…

No, the Correct Track Trailer Alignment and Lift Kit #RR55QX that you referenced are not the Never Fail bushings. The picture is correct and the kit has 16 brackets and 16 correction plates.

I definitely see what you're saying about the spacer, found as part #LC34UD, from the 2nd gen Correct Track LC407131. With that being said, the Correct Track Trailer Alignment and Lift Kit #RR23QX has been safety tested and works just fine…

I attached a link to a page that has install instructions for the Correct Track kit part #RR23QX that you referenced. I'd recommend the shackle bolt kit part #MR58ZR as it comes with the correct size bushings, bolts, and shackle straps.

The Correct Track Trailer Alignment and Lift Kit #RR23QX has 2 mounting holes as you are able to select either a 1-1/4" rise or 2-1/4" rise depending on which hole you select to attach the brackets.

I would try adding some white lithium grease like the part #L11354 to the rollers to see if that helps. There are also adjustments that you can make to the rollers of the slider. In the attached instructions you can see how to adjust.

The MORryde Wet Shoulder Bolt #MR52HR and Lippert Equa-Flex Wet Shoulder Bolt #LC126197 are identical in in size. The only difference I can see is the one comes from MORryde while the other comes from Lippert. Both have a length under head of…

The hangers will vary depending on the exact suspension set up from the manufacturer. With different spring combinations and number of axles used this will cause different parts to be required. These spring hangers are designed specifically for the…

Thanks for all the pictures! It looks like your axles are already below your leaf springs so I recommend using the Correct Track Trailer Alignment and Lift Kit item #RR23QX you were looking at. This kit mounts to your spring hangers and moves the…