TorkLift GlowStep Stow N' Go Scissor Steps w/ Landing Gear Review Video

Not following the manufacturer's instructions to the letter will give them an excuse if something were to happen so while I can't recommend drilling the extra holes to ensure it's safely mounted, it's the only way that the steps will…

I may have different installation method for you, but there is not an extended bracket made to push the TorkLift GlowStep Stow N' Go Scissor Steps w/ Landing Gear #TLA7843 away from your camper to clear your bumper. It may be possible to have a…

While we do not have a video of these steps being specifically installed on your camper I took a look at the instruction manual, which is also linked, and there is a method for installing these steps on a camper that does not have a bumper. You would…

Essentially it's how the two scissor steps store. The part #TLA7844 stores more like a traditional scissor step seen typically at the back of truck bed campers while the #TLA8004 stores more like what is seen on the side of campers. Since you…

I recommend using the TorkLift GlowStep Camper Scissor Steps w/ Landing Gear - 4 Steps - 20" Wide - 375 lbs #TLA7804-8000. These are a 4 step system that has glow tape on the steps to help with visibility at night, and the adjustable landing…

From what you have described the TorkLift GlowStep Stow N' Go Scissor Steps, #TLA7844, will match your needs. This is for entry heights between 31" and 42". It will set within your door sill width with just under 2" on each side,…

The TorkLift GlowStep Stow N' Go Scissor Steps #TLA7844 is going to extend out roughly 38 inches from where it installs. I say roughly since it's a scissor step and how far the steps extend changes the distance they stick out.

What I think you are asking is if the TorkLift GlowStep Stow N' Go Scissor Steps w/ Landing Gear, #TLA7844 has a latching connection or some type of quick disconnect feature to remove from the camper. They do not have what I would call a quick…

The TorkLift GlowStep Stow N' Go Scissor Steps w/ Landing Gear #TLA7834 only comes in the silver color with the black brackets. The overall folded dimensions are 14" High x 23-1/4" Wide x 11" Deep which includes the bracket and…

We have the TorkLift GlowStep Stow N' Go Scissor Steps w/ Landing Gear like part #TLA7844 which fold up and install on the bumper, but I'm not aware of any options that would flip up like the Lippert SolidStep ( #LC791574 for reference) and…

What's the entry height of your Lance? I am sure we have a set of the Torklift Glowsteps that will work but we need to know for sure the entry height to pick out right size. For example, the part #TLA7844 fits the height range of 31-42 inches.…

The TorkLift GlowStep Stow N' Go part #TLA7843 are stored on the side of your camper attached with a bracket like in the photo I have attached. They do stick out on the side. You would need the GlowStep Revolution Scissor Step for it to store…