Installing the Dexter Torflex Lift Kit Video

Hello David, The reason it’s $1000 more is because of the whopping 0.2 cu. ft. of extra space..... just kidding! The main difference comes down to the exterior and features. The #GE48FR has a sleek glass front that gives it a glossy, modern look,…

The lift kits we carry fit with specific axles; the #K71-725-02 is a tandem axle application and will give a 3-1/8" lift and is compatible with side-mounted #12 Torflex axles with 5,500-7,000-lb capacities. If that is what your axle is, this kit…

Hello Codi, I reached out to our friends at GE about the Amp draw for the GE Profile RV Refrigerator w/ Freezer #GE48FR and this was their response: This is a great question we hear often, its not as easy to answer. The refrigerator spec calls for…

I went out into the warehouse to measure the Lift Kit #K71-725-02 for you. The holes measure 9 inches on center and 9-1/2 inches on center. I've attached a photo to assist.

The Torflex Lift Kit #K71-725-02 will allow you to add 3-1/8" of lift on your tandem axle trailer with #12 Dexter Torflex axles. Your axle has mounting holes in the side and top of the flange. You will bolt the lift kit to the side of the mount…

The Dexter Torflex Lift Kits like the Tandem Axle #K71-725-02 that you referenced are only confirmed to work with Dexter Torflex axles. It's possible that the spacers will fit with your AL-KO axles but this has not been tested. The spacers for…

Hi Scott; we might have an option but it depends on your axles. If you have standard leaf spring axles with the springs running under the axles you could flip them to raise the trailer. If you have a 2-3/8" diameter axle you can use the Dexter…

Yes, the Torflex Lift Kit #K71-725-02 is the correct one to use on your 5th wheel trailer with tandem #12 Dexter 7K Torflex axles. This kit will provide an additional 3-1/8 inches of rise and will help level out your trailer so it isn't nose…

I took a look at the Bargman Door Latch 10-30-051 that you referenced and it is indeed oversized. The best option we have to replace this would be the Global Link RV Entry Door Locking Latch Kit part #295-000019 which can install in an opening up to…

Hey Robert, for a 5,200 lb Dexter Torflex axle like what you have we have the Dexter lift kit part #K71-724-02 which will give you a lift of 2-7/8 inches.

Hi William; the distance between the bolt holes on the #K71-725-02 is 9" as seen in the diagram below. This is designed for Dexter #12 Torflex axles. The tandem axle kit is the only option for the #12 Torflex.

I have the correct kit for you! The SLR P-15 unfortunately does not designate the particular model Dexter Torflex axle you have. However, given the 7,000 pound weight capacity of your axles, you either have the tandem Torflex #12, #12T, or #12V…