Will the Kodiak Disc Brake Kit K2HR35DS Fit My Trailer
Updated 04/19/2021 | Published 04/15/2021
Products Featured in This Question
Question:
Hello, I have an older type king trailer KBT 3600 B1 and I need new hubs with rotors and calipers plus a brake actuator. I am looking at buying two kits K2HR35DS the trailer is a twin axle type I want to reuse the brake spindles but I need to verify that the brake kit I was trying to upload a picture but it did not work I can send it in an e-mail. Can you please advise if the ed kit will work for my trailer? Thanks,
asked by: Marian S
Expert Reply:
The Kodiak Disc Brake Kit # K2HR35DS is designed to be used with a #84 spindle. These use the Inner bearing # L68149 that has an inner diameter of 1.375 inches, and the Outer Bearing # L44649 that has an inner diameter of 1.063 inches. The caliper brackets will fit a standard 4 bolt mounting flange that would measure 2 7/8 inches from center to center of the mounting holes right next to each other. You could also measure diagonally from center to center and get 4 inches. If your spindles and mounting plates match these, it will definitely fit your axle.
It should be noted that this kit does not include the bearings or seals, so you will also need the bearing kit # DBRKHW35EZ if you were going to be replacing the bearings.
The actuator will depend on which style you are needing. If you need an electric over hydraulic system, the Dexter DX Series # K71-651 would be a highly recommended option. If you are needing a surge style actuator, the Demco 2 Inch Actuator # DM62VR would be a good option as well
Product Page this Question was Asked From
Kodiak Disc Brake Kit - 10" Hub/Rotor - 5 on 4-1/2 - Dacromet and Stainless - 3,500 lbs
- Accessories and Parts
- Trailer Brakes
- Disc Brakes
- LH
- RH
- 3500 lbs
- Brake Assembly
- 5 on 4-1/2
- Hub and Rotor Assembly
- Kodiak
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Search Results: trailer safety chains
- Search Results: trailer jack
- Search Results: trailer bunk carpet
- Search Results: marine wheel bearing grease
- Search Results: spare tire mount
- Search Results: brake actuator
- Shop: Demco Hydraulic Brake Actuator w/ Electric Lockout - Disc - Zinc - 2" Ball - 7,000 lbs
- Shop: Kodiak Hydraulic Brake Line Kit - Single Axle - 18'
- Q&A: Recommended Disc Brake System for Salt Water Boat Trailer with Tandem Axles
- Q&A: Recommendations to Prevent Rust on Disc Brakes for Boat Trailer
- Shop: Bearing Kit for Trailer Brakes w/ 8" or 10" Hub/Rotor - EZ-Lube - 3,500 lbs
- Shop: Kodiak Hydraulic Brake Hose - 3/16" Male Fittings w/ Brass Flares - 1/8" ID - 19'
- Shop: Dexter Hydraulic Brake Lines and Fittings for Single-Axle, Torsion-Axle Trailers
- Shop: CE Smith Deluxe Marine-Grade Carpeting for Bunk Boards - Black - 12' Long x 11" Wide
- Shop: BulletProof Hitches 5/16" Safety Chains with Clevis Hooks - 38" Long - 18,800 lbs - Qty 2
- Q&A: Options For Connecting Safety Cables When Using The Dexter DX29FR Actuator
- Q&A: Should I Use A Steel Brake Line Kit Or A Rubber Brake Line Kit?
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Search Results: trailer hitch
- Article: Trailer Wiring Diagrams
- Shop: Trailer Hitch
- Video: A Look at the Power Mountain Tallboy 6 Ton Off-Road Bottle Jack with a Military Cargo Trailer
- Shop: Trailer Wiring
- Q&A: How Much Do the Power Mountain Tallboy Off-Road Bottle Jacks Weigh?
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Shop: Suspension Enhancement
- Article: Trailer Lighting Requirements
- Shop: Brake Controller
- Video: Review of Power Mountain Automotive Tools - Jacks and Jack Stands - PM34FR
on Accessories and Parts
