1. Accessories and Parts
  2. etrailer
  3. Trailer Hubs and Drums
  4. Bearing Kits
  5. Bearing L68149 and L44649
  6. 3500 lbs
Bearing Kit for Trailer Brakes w/ 8" or 10" Hub/Rotor - EZ-Lube - 3,500 lbs

Bearing Kit for Trailer Brakes w/ 8" or 10" Hub/Rotor - EZ-Lube - 3,500 lbs

Item # DBRKHW35EZ
lowest price pledge
Our Price: $39.40
Accessories and Parts
Orders above $99 qualify for Free Shipping
Shipping Weight: 1.87 lbs
Quantity: 
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Videos

Need help with installation?
Locate installers near me
This complete bearing kit is designed for use with (2) 8" or 10" disc brake hub-and-rotor assemblies. Includes inner bearings (L68149), outer bearings (L44649), grease seals, lug nuts, and grease caps. For 3,500-lb E-Z Lube axles. Call 800-298-1624 to order etrailer accessories and parts part number DBRKHW35EZ or order online at etrailer.com. Free expert support on all etrailer products. Guaranteed Lowest Price and Fastest Shipping for Bearing Kit for Trailer Brakes w/ 8" or 10" Hub/Rotor - EZ-Lube - 3,500 lbs. Accessories and Parts reviews from real customers.
  • All Info
  • Reviews (14)
  • Q & A (11)
  • Photos
  • Why etrailer?

etrailer Accessories and Parts - DBRKHW35EZ

  • Trailer Hubs and Drums
  • Bearing Kits
  • Bearing L68149 and L44649
  • etrailer
  • 3500 lbs

This complete bearing kit is designed for use with (2) 8" or 10" disc brake hub-and-rotor assemblies. Includes inner bearings (L68149), outer bearings (L44649), grease seals, lug nuts, and grease caps. For 3,500-lb E-Z Lube axles.


Features:

  • Complete kit includes inner and outer bearings, grease seals, and lug nuts for 2 trailer hub assemblies
    • Fits 10" hub-and-rotor disc brake assemblies for Dexter E-Z lube 3,500-lb axles as well as standard trailer hubs
  • L68149 Inner bearings are for use with L68111 inner race
  • L44649 Outer bearings are for use with L44610 outer race
  • 58846 Grease seals are double lipped to better retain grease and keep out moisture and debris
    • Inner diameter: 1.719"
    • Outer diameter: 2.565"
  • Drive-in grease caps have 1.999" diameter
  • Rubber plugs prevent any dirt or moisture from entering the hubs
  • (10) 1/2" Lug nuts secure your wheel to the hub


L68149 Trailer Hub Bearing

L44649 Trailer Hub Bearing

58846 Double Lip Grease Seal

CE11051 1/2" Trailer Wheel Lug Nut

DC-RP Rubber Lube Plug

DC-200L 2" Lubed Dust Cap and Rubber Plug






Customer Reviews

Bearing Kit for Trailer Brakes w/ 8" or 10" Hub/Rotor - EZ-Lube - 3,500 lbs - DBRKHW35EZ

Average Customer Rating:  4.7 out of 5 stars   (14 Customer Reviews)

This complete bearing kit is designed for use with (2) 8" or 10" disc brake hub-and-rotor assemblies. Includes inner bearings (L68149), outer bearings (L44649), grease seals, lug nuts, and grease caps. For 3,500-lb E-Z Lube axles.

- DBRKHW35EZ
by:

Everything arrived as ordered. Fit my 1992 Champion 190DCR trailer perfectly.



- DBRKHW35EZ
by:

Hub caps did not fit the Kodiak hubs etrailer sent with the same order, just slightly too big. Had to use my old ones with the new bearings (which all worked as advertised)


Comments
Sorry to hear that you received the wrong size caps. Customer Service will be reaching out about this.
-- Etrailer Expert Sierra K - 09/28/2021


- DBRKHW35EZ
by:

Website is easy to use and product information is very detailed. I easily found a complete wheel bearing rebuild kit for my Escort boat trailer with EZ Lube Axles. Parts arrived on time and the staff are there to help. Will definitely be back! Thanks etrailer!



- DBRKHW35EZ
by:

Great company with great service and parts. Thank you.



- DBRKHW35EZ
by:

The bearing set and seals were exactly as ordered and exactly what I needed.


Comments
The bearings worked perfect and continue to work just as one would expect.
Charles - 03/27/2021


- DBRKHW35EZ
by:

Parts were correct for my trailer, easy ordering and prompt delivery.



- DBRKHW35EZ
by:

Thanks A+++++ , fast shipping



- DBRKHW35EZ
by:

Easy lube cap didn’t go on very well ended up using the old bearing buddy’s



- DBRKHW35EZ
by:

This is a GREAT replacement bearing kit at a very affordable price. I'm glad I noticed the races are NOT included before I started refurbing my drums. Luckily my old races were in great shape and everything went back together as it should.



- DBRKHW35EZ
by:

good value, easy ordering



- DBRKHW35EZ
by:

All the parts I ordered were correct and of good quality. The customer service was outstanding!! I spent probably 30 minutes on the phone with Danielle as we tried to figure out exactly what axle was on my trailer ( wasn’t what it was supposed to be ). The parts showed up in a pretty reasonable amount of time considering the pandemic was in full swing. The prices also were very reasonable, as she searched her inventory for the best price, found a package deal for me with more than I was looking for at less cost than buying the parts individually. I will use them again for sure and definitely recommend them to anyone needing trailer parts.



- DBRKHW35EZ
by:

I really appreciate the quick delivery. The parts were sitting on my porch 4 days after ordering and traveling half way across the country. Thank you.



- DBRKHW35EZ
by:



- DBRKHW35EZ
by:


14
14

Ask the Experts about this etrailer Accessories and Parts

  • Should Trailer Hub Grease Seals Be Driven Flush With Hub Bore
    Grease seals such as those included with the # DBRKHW35EZ bearing kit should be be installed so that they are flush with the hub bore. If the correct seal is used, everything should fit together perfectly. As long as the castle nut is correctly ran down, everything should be held together well so there should be no lateral movement of the bearing. Running the castle nut isn't an intuitive process. It needs to be snug enough so that the inner and outer bearings hare held into place correctly...
    view full answer...
    Image 1 for
  • Compatibility of EZ Lube Grease Caps on Standard Axle
    The Bearing Kit for Trailer Brakes w/ 8" or 10" Hub/Rotor - EZ-Lube - 3,500 lbs # DBRKHW35EZ is safe to use on standard axles and the double lip seal will also seal well on that axle. There is no need to get a standard grease cap as the function will be the same in keeping debris out and grease in.
    view full answer...
  • Can Races and Cotter Pins Be Added to the Bearing Kit for 3,500 lbs Axles
    The Bearing Kit for 3,500 lbs Axles part # DBRKHW35EZ does not come with any races but you can add the ones you need using part # L44610 and part # L68111. For the cotter pins you can use part # 165649.
    view full answer...
  • How To Tighten Spindle Nut on EZ-Lube Spindle
    Instead of a castle nut and a cotter pin, your Ez-Lube spindle used a D-washer and a nut retainer. After the bearings are repacked and the grease seal is in place, working the hub gently into place until it seats fully. Install the D-washer then the nut. Snug the nut down a little at a time as you rock the hub back and forth making sure it's seated. Run the nut down just past finger tight but not so tight it doesn't spin freely. Then install the nut retainer then the wheel. I've linked...
    view full answer...
    Image 1 for
  • Correct Disc Brakes for a Karavan Boat Trailer UST-5000-TB-78-10
    In order to upgrade to disc brakes on a Karavan Boat Trailer (UST-5000-TB-78-10) you'll want to use the Kodiak Disc Brake Kit part # K2HR35D which comes with everything you need besides the Bearing Kit part # DBRKHW35EZ and a new surge brake actuator rated for use with disc brakes like the DDexter DX7.5 Drop-N-Go Brake Actuator part # 099-175-20. I have attached a full list of options below.
    view full answer...
  • Correct Bearings and Grease Seals For Upgrading to 10" Hydraulic Disc Brakes
    For the Kodiak Disc Brake Kit # K2HR35D there are 2 options for you depending on if you have an EZ lube spindle. For EZ Lube Spindles the Bearing Kit # DBRKHW35EZ will give you 2 grease seals, 2 inner bearings, 2 outer bearings, 2 EZ lube Grease Caps and 10 lug nuts. For standard spindles the Bearing Kit # DBRKHW35 will give you 2 grease seals, 2 inner bearings , 2 outer bearings, 2 grease caps and 10 lug nuts. For standard spindles you can upgrade to the Bearing Buddy # BB1980A-SS...
    view full answer...
  • Recommended Disc Brakes for Shoreland'r Boat Trailer Used In Salt Water with 3,225 Lb Axles
    The Kodiak Disc Brake Kit part # K2HR35DS is a great option to replace the disc brakes on a Shoreland'r Boat Trailer. It has dacormet and stainless steel finishes so it will hold up to salt water just fine. The hubs and rotor are integrated into one another which will make for easy replacement. Please note, you'll also need the Bearing Kit for Trailer Brakes part # DBRKHW35EZ to complete the installation.
    view full answer...
  • Will Using Separate Hub/Rotor Push the Wheels Out Further Compared to Combined Hub/Rotor 3,500 Axle
    It is possible for the wheel to be pushed out further when using a separate hub and rotor as opposed to an integrated hub and rotor but there are a few factors at play so I do recommend matching the front and rear axle in regards to the type of hub. For a 3,500 lb axle you'll use part # K2R35D or part # K2HR35DKG for combined which also requires part # DBRKHW35EZ.
    view full answer...
  • Will K2HR35DS replace UFP DB-42
    The Kodiak Disc Brake Kit - 10" Hub/Rotor # K2HR35DS may fit your UFP DB-42 kit as a replacement. I cannot confirm without the size and dimensions of the axle and spindle. If your spindle has an inner bearing diameter of 1.378 inches and outer bearing of 1.063 inches it will work You will also need a set of seals for the new hubs. The seals that will fit this hub is # 58846. If you decide to go with this set of hubs I recommend picking up # DBRKHW35EZ. This kit comes with new bearings,...
    view full answer...
  • Parts Needed To Added Hydraulic Disc Brakes To Tandem Axle Boat Trailer W/ 3500lb Axles
    Since your axles currently use the Dexter Trailer Hub and Drum Assembly for 3,500-lb E-Z Lube Axles - 10" Diameter - 5 on 4-1/2 # 84546UC3-EZ that means you have tandem 3500lb axles with the common # L68149 and # L44649 bearing combination, and a 4 bolt brake mounting flange. To convert your trailer to hydraulic disc brakes you will need to start with two of the Kodiak Disc Brake Kit - 10" Hub/Rotor - 5 on 4-1/2 - Dacromet - 3,500 lbs # K2HR35D which will bolt up to your existing 4 bolt...
    view full answer...
  • Will the Kodiak Disc Brake Kit K2HR35DS Fit My Trailer
    The Kodiak Disc Brake Kit # K2HR35DS is designed to be used with a #84 spindle. These use the Inner bearing # L68149 that has an inner diameter of 1.375 inches, and the Outer Bearing # L44649 that has an inner diameter of 1.063 inches. The caliper brackets will fit a standard 4 bolt mounting flange that would measure 2 7/8 inches from center to center of the mounting holes right next to each other. You could also measure diagonally from center to center and get 4 inches. If your spindles...
    view full answer...

Do you have a question about this Accessories and Part?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality accessories and parts for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate accessories and part information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Lindsey S
Edited by:
Lindsey S
Employee Jeff D
Installed by:
Jeff D
Employee Wilson B
Updated by:
Wilson B
Employee Brian T
Written by:
Brian T

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 800-298-1624