Replacing Hubs and Leaf Springs on a Small Utility Trailer
Updated 04/07/2021 | Published 04/06/2021
Products Featured in This Question
Question:
I have an old lowes 5x8 utility trailer. Can you recomend replacement parts based on this info? Im in FL now and would like to get parts ordered now so i can save time to get trailer repaired as soon as i get home to RI. Thanks
asked by: Jack
Helpful Expert Reply:
We can definitely get you the parts needed to get your Lowes Trailer up and running, but there are a few things you will need to do to confirm the following parts will fit.
First, you will need to determine the bolt pattern of your wheels. I linked an article that assists with this process. If you have a five bolt pattern, I have found that Option 3 in the article is the easiest to use.
Second, you will need to remove one of the hubs to get access to the bearings. There are usually numbers stamped on them, but these can were off over time. If there are no numbers, you will need to measure the inside diameter with a pair of calipers to get the exact size.
If you see the number # L44643 or if it measures at 1 inch exactly, you will need either the Idler Hub with 5 on 4 1/2 bolt pattern # AKIHUB-545-2-EZ-1K.
If you see the number # L44649 or if it measures 1.063 inches, you will need either the Idler Hub with 5 on 4 1/2 bolt pattern # AKIHUB-545-2-EZ-2K or the Idler Hub with 4 on 4 bolt pattern # AKIHUB-440-2-EZ-2K.
As to the springs, you would need to measure from eye to eye on a double eye spring, or from eye to the top of the hump on a slipper style spring to get the correct replacement. If you can find a label or sticker that has a capacity somewhere on the axle, it would also help immensely. These do tend to fall off or get faded and unreadable though. If this cannot be located, you may be able to contact Lowes to see what axles they used on their 5 x 8 trailers.
Product Page this Question was Asked From
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.06 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: trailer hubs and drums
- Shop: Karrier ST175/80R13 Radial Trailer Tire with 13" White Wheel - 5 on 4-1/2 - Load Range C
- Shop: Easy Grease Trailer Idler Hub Assembly for 2K Axles - 10" to 12"- 5 on 4-1/2 - Pre-Greased
- Search Results: trailer lights
- Article: How to Determine Tire/Wheel Diameter
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Q&A: Determining The Correct Replacement Hubs For A 2008 Triton Travel Trailer
- Q&A: How to Determine Correct Hub For Karavan PWC Trailer
- Q&A: Replacement Bearings, Races and Grease Seal For a 2017 Karavan KB2200 Boat Trailer
- Q&A: Depth Measurement For Hubs That Fit A 1" Straight Spindle
- Q&A: Upgrading Camper Lights to LED and Clearance Lights with Brake and Turn Signal Functions
- Q&A: Determining Replacement Hub for Boat Trailer with H-1062-1 Printed on Back of Hub
- Video: Choosing the Right Trailer Tires and Wheels
- Video: DIY Installation for the etrailer Galvanized Trailer Idler Hub Assembly for 2,000-lb Axles
- Video: Ultimate Overview of the Thinline LED Trailer Tail Light
- Video: Trailer Idler Hub Assembly for 2K Axles Review
- Video: Identification Light Bar for Trailers over 80" Wide Review
- Video: Identification Light Bar for Trailers over 80" Wide: The Breakdown
- Shop: etrailer Enclosed Trailer Transition Plate - Universal - 1,000 lbs - Qty 1
- Shop: Grease Seal
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Galvanized
- Shop: Dexter Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2 - Galvanized
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
- Article: Most Popular Wheel Bearings
- Q&A: Replacement Disc Brakes for 2006 McClain (MCCL) Boat Trailer
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Trailer Wiring Diagrams
on Trailer Bearings Races Seals Caps
