Review of etrailer Trailer Hubs and Drums - Pre Greased Hub - AKIHUB-545-2-LF-2K

Products Featured in this Video

Trailer Idler Hub Assembly for 2K Axles - 13" to 15" Wheels - 5 on 4-1/2 - Pre-Greased

13 reviews

Code: AKIHUB-545-2-LF-2K

Price:  $29.80

• Trailer Hubs and Drums
• Hub
• Pre-Greased
• Standard
• L44649
• L44649

• For 2000 lbs Axles
• 1/2 Inch Stud
• 5 on 4-1/2 Inch
• 13 Inch Wheel
• 14 Inch Wheel
• 14-1/2 Inch Wheel
• 15 Inch Wheel
• etrailer

Hub is designed for use on trailer idler axles. Fits 2,000-lb axles with BTR spindles. Inner bearing (L44649) and race, outer bearing (L44649) and race, grease seal, grease cap, and lug nuts included. Fits 13" to 15" wheels.

Do you have a question about part AKIHUB-545-2-LF-2K?more information >     

etrailer Trailer Hubs and Drums - Pre Greased Hub - AKIHUB-545-2-LF-2K Review

Jeff: Hello, everybody. This is Jeff at etrailer.com. Today, we're going to take a look at this pre-greased trailer idler hub for 2,000 pound axles. It has a five on four and a half inch bolt pattern. Now this trailer hub assembly will fit idler axles. It is a pre-greased hub, which makes it easy to install.

No need to pack bearings with grease. It'll come already pre-greased with the lithium complex multipurpose grease. It does include the pre-greased inner and outer bearings, and they use the same bearing on the inner and outer. It's part number L44649. The bearing races that the bearings ride in are all pre-installed and it also has the pre-installed grease seal on the back here in the rear.

That's a part number 10-9. It does come with the grease cap and then five of the half inch by 20 size lug nuts to install your wheel to your hub.Now, this is a sturdy iron construction. They use a zinc enriched paint on this hub to add durability. It is QAI and CSA certified. Again, the specs on this, it fits 2,000 pound trailer axles with the BTR spindles.

It is compatible with standard axles from most manufacturers including Dexter, Lippert and Al-Ko. The hub diameter, which is the diameter right here is 6.25 inches, so this will fit 13 inch to 15 inch wheels. The bolt pattern is five on four and a half inches. The wheel stud diameter is a half an inch. So again, these half inch lug nuts will go on there.

And the weight capacity on this hub is 1,000 pounds. So when this is used with one on the other side, it'll meet your 2,000 pound axle capacity. But that should do it for the review on this pre-greased trailer idler hub for 2,000 pound axles. It has the five on four and a half inch bolt pattern.