Upgrading Camper Lights to LED and Clearance Lights with Brake and Turn Signal Functions
Updated 08/14/2018 | Published 08/13/2018
Products Featured in This Question
Question:
What I meant was, Id like the rear clearance lights the ones closest to the roof, the two most outer ones to function as turn, stop and marker lights. Id like them all to be of the same design and size. Ultimately, I want to replace all 13 clearance lights 6 amber, 7 red but NOT the factory stop, turn and tail lights.
asked by: Matt
Expert Reply:
You can upgrade to LED lights but what I need to know is if the camper has the brake lights and turn signals on the same bulb or if it has separate amber turn signals.
And if the camper does have combined brake and turn signals do you want to keep it that way or do you want to have separate turn signal and brake light circuits?
We have several options for double tail lights, such as # CE86FR, and even some triple applications such as # 47-84-005.
Depending on if you want combined or separate brake/turn signals you may need additional equipment. Keep in mind that there are lighting requirements for trailers. Take a look at the link I have provided with additional information.
Product Page this Question was Asked From
Combination LED Trailer Tail Light - Submersible - 6 Function - 11 Diodes - Passenger Side
- Trailer Lights
- Tail Lights
- Brake/Tail/Turn
- Marker
- Square
- Surface Mount
- Submersible Lights
- LED Light
- 5L x 5W Inch
- Red
- Optronics
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: trailer hubs and drums
- Shop: Karrier ST175/80R13 Radial Trailer Tire with 13" White Wheel - 5 on 4-1/2 - Load Range C
- Shop: Easy Grease Trailer Idler Hub Assembly for 2K Axles - 10" to 12"- 5 on 4-1/2 - Pre-Greased
- Search Results: trailer lights
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Article: How to Determine Tire/Wheel Diameter
- Q&A: Determining The Correct Replacement Hubs For A 2008 Triton Travel Trailer
- Q&A: Replacement Bearings, Races and Grease Seal For a 2017 Karavan KB2200 Boat Trailer
- Q&A: Replacing Hubs and Leaf Springs on a Small Utility Trailer
- Q&A: How to Determine Correct Hub For Karavan PWC Trailer
- Q&A: Depth Measurement For Hubs That Fit A 1" Straight Spindle
- Q&A: Determining Replacement Hub for Boat Trailer with H-1062-1 Printed on Back of Hub
- Video: Feature Review ThinLine LED Tail Light for Trailers over 80" Wide
- Video: DIY Installation for the etrailer Galvanized Trailer Idler Hub Assembly for 2,000-lb Axles
- Video: Identification Light Bar for Trailers over 80" Wide: The Breakdown
- Video: Choosing the Right Trailer Tires and Wheels
- Video: Ultimate Overview of the Thinline LED Trailer Tail Light
- Video: Identification Light Bar for Trailers over 80" Wide Review
- Video: Trailer Idler Hub Assembly for 2K Axles Review
- Shop: etrailer Enclosed Trailer Transition Plate - Universal - 1,000 lbs - Qty 1
- Shop: Double Lip Grease Seal - ID 1.249" / OD 1.983" - Qty 1
- Shop: Easy Grease Trailer Idler Hub for 2K Axles - 13" to 15" Wheels - 5 on 4-1/2 - Pre-Greased
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
- Shop: Double Lip Grease Seals (pair)
- Article: Trailer Wiring Diagrams
- Article: Trailer Lighting Requirements
- Q&A: Recommended Baseplate for a 2002 Jeep TJ Sport
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
on Trailer Lights
Matt
8/13/2018
What I meant was, Id like the rear clearance lights the ones closest to the roof, the two most outer ones to function as turn, stop and marker lights. Id like them all to be of the same design and size. Ultimately, I want to replace all 13 clearance lights 6 amber, 7 red but NOT the factory stop, turn and tail lights.