Replacement Grey Arm Release Lever for Thule T2 Classic Platform Bike Rack

Question

Question:

Can you supply the plastic release lever for the 7533357902 ratchet assy?

asked by: J K

0

Expert Reply:

The grey plastic release lever on the Replacement Non-Locking Ratchet Arm Assembly for Thule T2 Classic Platform Bike Racks part # 753357902 isn't available separately from Thule. They only offer the entire assembly unfortunately so that's what you'll have to replace to repair the rack.

expert reply by: Conner L

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

Hi Dan! The Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" #C13397 you were looking at is the hitch I recommend for your 2026 Honda CR-V Hybrid. This will actually fit the Hybrid and Non-Hybrid models, so you are perfectly good to go…

view full answer...

Answer 5

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 6

Hey Erica, thanks for reaching out! Since your 2026 Honda CR-V is a Hybrid we're a bit limited on the hitch options, and you'll need to get one that does require some fascia cutting. For this, I recommend the etrailer Trailer Hitch Receiver…

view full answer...

Answer 7

Hey Frank! This is a newer product, so there aren't many long-term owner reviews available yet. That said, we have done extensive testing on the Benton MoveHitch #B86VR. A strain gauge was used to measure the forces the carrier experiences during…

view full answer...

Answer 8

Hey Napoleon! The perfect hitch for your 2026 Honda CR-V Hybrid Sport is the etrailer #e98848. This is a Class III hitch with a bolt-on installation and a limited lifetime warranty. It also features a matte black finish which blends well with OEM…

view full answer...

Answer 9

The available trailer hitches for your 2019 Honda CR-V can be pretty easily categorized into hidden and non-hidden groups. I highly recommend going with a hidden-crosstube hitch, especially on a new vehicle like yours, as this is going to create a…

view full answer...

Answer 10

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 11

Hi Deb! There are quite a few hitches available for your 2025 Honda CR-V Hybrid and I have the 2" receiver options (best size for what you are wanting) listed below with their corresponding weights. Curt Trailer Hitch Receiver - Custom Fit -…

view full answer...

Answer 12

Hi Rob, both the etrailer hitch part #e98848 and the EcoHitch part #EH25KR will install and function properly on your 2026 CR-V Hybrid Sport Touring, so you’re not risking choosing a hitch that won’t work. Both hitches use a hidden cross tube and…

view full answer...

Replacement Grey Arm Release Lever for Thule T2 Classic Platform Bike Rack

Product Page this Question was Asked From

Continue Researching