Does Curt Echo Mobile Brake Controller Fit 2020 Ford Ranger

Question

Question:

Curt Echo Wireless Trailer Brake Controller - 1 to 2 Axles - Proportional Will this work with Lane-Keeping System, Adaptive Cruise Control and Blind Spot Information System on 2020 Ford Ranger XLT with the Factory Tow Package? Thanks

asked by: Doug H

1

Helpful Expert Reply:

The early versions of the Curt Echo Mobile part # C51180 had issues with the new Ford Rangers like your 2020 model but they updated the controller and now it works perfectly fine with the 2020 models like yours.

expert reply by: Jameson C

1

Answer 1

For a 2019 Ford Ranger we have really easy to install brake controllers like the Curt Echo Mobile part #C51180 but we do not have any solutions that tie into the factory wiring of the truck. The Echo will just plug into your active 7-way and once…

view full answer...

Answer 2

Based on the picture you provided the OEM 7-way/4-way connector for your 2021 Ford Ranger uses the standard connector as the Curt T-Connector Vehicle Wiring Harness with 7-Way Trailer Connector #C56431 you were looking at. We actually offer the same…

view full answer...

Answer 3

From all the info I could find, the 2020 Ranger and the 2021 Ranger both use the same stock bumper. With that being said, the 7 Way plug that is included with the Curt #C56431 can definitely be replaced with the 7 Way plug from the #HM40975.

view full answer...

Answer 4

Hello Igor, yes the Curt Echo Mobile brake controller part #C51180 does for sure fit your 2022 Ford Ranger that has a factory 7-way as it fits basically all vehicles that have a 7-way.

view full answer...

Answer 5

For your 2020 Ford Ranger the Detrailer hitch part #e63ZR is a really great option with more than enough towing capacity and is mostly hidden as well. The 7-way kit part #C56431 is also the correct kit to add 7-way to your truck and then the #HM48625…

view full answer...

Answer 6

The 2019 Ford Ranger can be fitted with an aftermarket brake controller but Ford did not make this very easy. The best option will be the Curt Echo Wireless Trailer Brake Controller part #C51180 because it does not require splicing and that's…

view full answer...

Answer 7

In order to convert the 4-way on a 2022 Ford Maverick to a 7-way you'll need the 4 to 7-Way with 4-Way part #ETBC7L. This kit comes with the actual adapter and everything else you need such as wires, connectors, and circuit breaker. It also…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 12

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Does Curt Echo Mobile Brake Controller Fit 2020 Ford Ranger

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching