Finding Replacement Hardware for Curt Trailer Hitches

Question

Question:

I need hitch hardware kits for Curt models 13429, 13591, and 13200. Are the replacement hardware kits? Thats seems really high!

asked by: Garrett A

0

Expert Reply:

The replacement hardware for the hitches you mentioned is the part # RHK like you mentioned. One solution would be to check out the instructions links for the hitches you need the hardware for and then take that to a hardware store and pick out whats needed from there.

expert reply by: Jameson C

0

Answer 1

Yes, we do have mounting hardware available for Curt #13591. The part number for the Replacement Hardware Kit is #RHK. Enter RHK in the search box and then you will need to enter 13591 for the Hitch Item Number and Curt for the Manufacturer.

view full answer...

Answer 2

We can replace the entire hardware kit, however the bolts themselves are not individually replaceable. The correct replacement hardware kit for the hitch on your 2002 Toyota Highlander hitch will be the Replacement Hardware Kit for Trailer Hitch part…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 7

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 8

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 11

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 12

Hi LaMar, To add a 7-way plug to your 2024 Toyota Highlander SLE you'll need to use the etrailer Universal Installation Kit for Trailer Brake Controllers part #ETBC7. This kit will give you a functioning 4-way flat and 7-way for towing and…

view full answer...

Finding Replacement Hardware for Curt Trailer Hitches

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching