Availability Of Trailer Idler Hub With 5 on 5 Bolt Pattern
Updated 01/08/2021 | Published 01/05/2021
Products Featured in This Question
Question:
Do you carry a 5.5 Bolt circle hub with a OD of approximitly 7in
asked by: Christian
Expert Reply:
Currently the only trailer hubs we offer with a 5 on 5 bolt pattern are the Trailer Idler Hub Assembly for 3,500-lb Axles # AKIHUB-550-35-K, and the Trailer Idler Hub Assembly for 3,500-lb E-Z Lube Axles # AKIHUB-550-35-EZ-K which both have an outer diameter of 6-1/4".
Both of these hubs are designed for spindles that use inner bearing # L68149 and outer bearing # L44649. To confirm that these hubs will fit your spindles you will want to remove one of your current hubs and verify that the bearings used match the above bearings.
The two ways to do this is to look for the bearing number stamped on the bearing like shown in the included picture of the # L44649, or you can use digital calipers like # PTW80157 to precisely measure the spindle according to the included diagram.
For this hub to be compatible the inner bearing section of the spindle will need to measure 1.378", and the outer bearing section will need to measure 1.063".
I included videos for each of the products mentioned for you to take a look at.
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 5 - Pre-Greased
- Trailer Hubs and Drums
- Idler Hub
- Pre-Greased
- Standard
- L68149 / L44649
- Standard Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 5 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: 5 on 5 trailer hub
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 5 - Pre-Greased
- Shop: CE Smith Trailer Hub Assembly w/ Carrying Case for 2,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Shop: CE Smith Trailer Hub Assembly w/ Carrying Case for 2,700-lb Axles - 5 on 4-1/2 - Pre-Greased
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2
- Video: Review of the Bearing Buddy Bearing Protectors-BB1980A
- Q&A: Differences Between Trailer Idler Hubs With a 5 on 5 Bolt Pattern
- Search Results: bearing buddy
- Search Results: tl5rk
- Search Results: wheel center cap
- Search Results: trailer lights
- Search Results: ptw83020
- Search Results: bearing buddy 1980
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 5-1/2 - Pre-Greased
- Shop: CE Smith Trailer Idler Hub Assembly w/ Case for 2.5K Axles - 5 on 4-1/2 - Galvanized - Pre-Greased
- Video: In-Depth Review of the Trailer Wheel Center Cap, Chrome, 3.19" Pilot Size
- Video: Review of Kenda Trailer Tires and Wheels - Tire with Wheel - AM32131
- Video: Review of Kenda Trailer Tires and Wheels - Tire with Wheel - KE75EV
- Video: Review of Taskmaster Trailer Tires and Wheels - Tire with Wheel - TA59AR
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Video: The Low-Down on the Trailer Idler Hub Assembly for 3,500-lb E-Z Lube Axles
- Video: What to Know About the Powerbuilt Deluxe Bearing Packer
- Q&A: Is There 3,500 lb Trailer Axle With 89 Inch Hub Face Length & 5 on 5" Hub
- Q&A: Timbren Axle-Less Trailer Suspension Compatibility with Jeep 5 on 5 Bolt Pattern
- Q&A: Replacement Brake Assemblies for Dexter 3,500 lb Trailer Axle
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: How Long Does It Take to Install the Demco Stay-IN-Play Duo Braking System?
- Q&A: Dexter 008-256-07 Trailer Hub Replacement
- Q&A: Recommended Axle To Use Off-Road Jeep Wheels/Tire On Trailer
- Article: Trailer Tire Sizing
on Trailer Hubs and Drums
