Review of etrailer Trailer Hubs and Drums - Pre Greased Idler Hub - AKIHUB-550-35-K

Products Featured in this Video

Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 5 - Pre-Greased

76 reviews

Code: AKIHUB-550-35-K

Price:  $36.03

• Trailer Hubs and Drums
• Hub
• Pre-Greased
• Standard
• L68149
• L44649

• For 3500 lbs Axles
• 1/2 Inch Stud
• 5 on 5 Inch
• 13 Inch Wheel
• 14 Inch Wheel
• 14-1/2 Inch Wheel
• 15 Inch Wheel
• etrailer

Hub is designed for use on trailer idler axles. Fits 3,500-lb axles with #84 spindles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, and lug nuts included.

Do you have a question about part AKIHUB-550-35-K?more information >     

etrailer Trailer Hubs and Drums - Pre Greased Idler Hub - AKIHUB-550-35-K Review

Jeff: Hello, everybody. This is Jeff at etrailer.com. Today we're going to take a look at this pre-greased trailer idler hub, for 3500 pound axles, with the five on five inch bolt pattern.Now this trailer hub assembly is designed to fit idler axles. It is a pre-greased hub, makes it very easy to install, so you don't have to worry about packing any bearings with grease. They will come already greased with lithium complex multipurpose grease. It will include on the inside a pre-greased inner bearing, part number L68149, and the bearing race that it rides on.

The outer bearing, pre-greased, L44649, and the bearing race for that all pre-installed.It will also include the installed grease seal in the rear here. Part number 58846. And then I laid out what else it would include. The standard grease cap that would pop right in there, and then five of the half-inch by 20 size lug nuts.Now this hub is a sturdy iron construction. Has a nice zinc-enriched paint for durability.

It is QAI and SCA certified. A few specs on this. The application is for 3500 pound trailer axles, with the number 84 spindles. And it is compatible with standard axles for most manufacturers including Axletech, Dexter, Lippert, and AL-KO. The hub diameter is six and a quarter inches, which means it'll fit 13 to 15 inch wheels.Bolt pattern we mentioned on this is a five on five inch bolt pattern.

And the wheel stud diameter's a half an inch so you'll use your half-inch lug nuts to hold your wheel and tire assembly to the hub.But that should do it for the review on the pre-greased trailer idler hub, for 3500 pound axles with the five on five inch bolt pattern..