Solution for Chevy Silverado Where Furrion Vision S Side Cameras Wont Come On

Question

Question:

There is power from the running lights but not enough to power the camera when hooked up to a 2015 Silverado.

asked by: Terry A

0

Expert Reply:

The Furrion 7-Way adapter part # FR87PR that you referenced is exactly what you need for the problem you described. This was designed to provide more current for the running light circuit so that the Vision S system's side cameras will function.

Another solution is to splice in the PWM Filter # VGR64VR behind the camera to provide a steady current for proper operation.

expert reply by: Jameson C

0

Answer 1

Yes, the 7-Way Vehicle Power Adapter w/ Power Switch for Furrion RV Observation Camera #FR87PR is the correct fix for your 2022 GMC Sierra 3500HD. The newer GM trucks had an issue with their running lights circuit not providing enough amperage needed…

view full answer...

Answer 2

Yes, we have encountered this problem. The relay inside of the 7-Way Vehicle Power Adapter w/ Power Switch for Furrion RV Observation Camera #FR87PR isn't showing the same amperage draw that your 2021 GMC Sierra 3500 is used to. This causes the…

view full answer...

Answer 3

Yes, the Replacement 7" Monitor for Furrion Vision S Wireless RV Camera System #FR47FR will work to replace the 4.3" monitor that came with your Furrion Vision S Wireless RV Backup Camera System w/ Night Vision #FOS43TASF. Your current…

view full answer...

Answer 4

The only pin that should be continuously showing 12V power on the 7-Way connector on your vehicle is the 12V power circuit which is normally the black wire but not always. In 7-way wiring the 12V auxiliary power feed is carried on the contact at the…

view full answer...

Answer 5

Yes, the 7-Way Vehicle Power Adapter w/ Power Switch #FR87PR will work on your 2022 Chevrolet Silverado 2500HD to allow the Furrion camera system to function correctly. We also have the 12V PWM Filter for RV Backup Camera Systems #VGR64VR that can be…

view full answer...

Answer 6

Furrion has an adapter that allows the new GM trucks to use Furrion Vision S systems with the part #FR87PR.

view full answer...

Answer 7

You should be fine with just the one. To this point we've had limited in-house testing of wiring configurations, but of the two installs completed of a 3-camera system such as you have (most installs are of a single back-up camera), a single 12V…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

Hey Greg, yes, I can definitely help with that. The head and the base of the Demco Autoslide 5th Wheel Hitch #DM79GV can be separated. The head weighs about 60 lbs by itself. The base by itself is about 185 lbs. The side plates (which can also be…

view full answer...

Solution for Chevy Silverado Where Furrion Vision S Side Cameras Wont Come On

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching