Why Doesnt Retro-Fit Kit for Dodge Sprinter Van 590064-00 Come with Bushings

Question

Question:

The two links do not show sleeves inserted. Are they or are they included? Bolt goes through them to van frame.

asked by: Lyman

0

Expert Reply:

The part # RM-590064-00 is a part that is normally used with a sway bar kit # RM-1209-128 on Sprinter vans that don't have a factory sway bar. The sway bar part number does come with the needed bushings to use with the adapter.

expert reply by: Jameson C

0

Answer 1

Hi John; is your 2021 Dynamax Isata 3 on the 2500 or the 3500? If it is the 2500 you can use the Roadmaster Rear Anti-Sway Bar #RM-1209-128. If you don't have a factory sway-bar you will also need the #RM-590064-00. If this is the 3500 you need…

view full answer...

Answer 2

I have attached the installation instructions for the Roadmaster #RM-1209-128 to this answer, but this rear anti-sway bar will mount in place of your factory sway bar. If your 2016 MB Sprinter 2500 does not have a factory sway bar you will also need…

view full answer...

Answer 3

Hey Jim, you would want the Roadmaster rear bar part #RM-1209-128 for your 2024 Mercedes Sprinter High Roof 2500. The feedback we've gotten on this bar for your Sprinter has been really good for improving the handling and reducing sway. Then for…

view full answer...

Answer 4

Hey Tony! I checked with our vendors and the only option for a sway bar on your 2022 Mercedes-Benz Sprinter 2500 is the 1-1/8" Roadmaster Rear Anti-Sway Bar item #RM-1209-128. However, this is just meant as a replacement option for the factory…

view full answer...

Answer 5

Having that slight gap between the new SuperSprings #SSR-329-47 and the platform they make contact with is common not just with this brand but with others as well. It allows your suspension to compress some so as not to have too much of an effect on…

view full answer...

Answer 6

For your 2021 Mercedes-Benz Sprinter 2500 that does not have a factory sway bar your best option is the part #RM-1209-128 with the mount kit part #RM-590064-00. The mount kit is for versions of your vehicle that do not have a factory sway bar and…

view full answer...

Answer 7

For your 2017 Mercedes Benz Sprinter 2500 the Roadmaster sway bar kit part #RM-1209-128 is a confirmed fit and will work great. Since you do not have a factory sway bar you will need to also use the #RM-590064-00 when you install it. If you check out…

view full answer...

Answer 8

The 2017 Mercedes-Benz Sprinter 2500 could have came from the factory either with or without a rear anti-sway bar. If you do not have the factory rear anti-sway bar then in order to install the Roadmaster Rear Anti-Sway Bar part #RM-1209-128 you…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 11

Hey Doug! The Firestone Ride-Rite Air Helper Springs #F35FV are the right kit for your 2026 Ford F-350 FX4 dually. However, you will need to measure to be sure it fits. The distance from the top of your rear axle to the top of the jounce bump stop…

view full answer...

Answer 12

Hey Cory, Air springs are going to be the best at leveling your F-350 back out once the weight is added but they will most likely affect your unloaded ride quality, even when aired down. That being said, a majority of the unloaded ride quality…

view full answer...

Why Doesnt Retro-Fit Kit for Dodge Sprinter Van 590064-00 Come with Bushings

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching