Rear Sway Bar and SumoSprings for 2024 Mercedes Sprinter High Roof

Question

Question:

My vehicle is 2024 Mercedes Sprinter 2500 high roof with 2WD and 144WB. VIN W1Y4KBHY8RT17003. It is a DIY camper van with maybe 2,000lbs of add one. I seek anti-sway solution with rear anti-sway bar Roadmaster or Hellwig and front Sumo spring stops. Please recommend which to use for my Sprinter. One shop suggested Roadmaster 1209-128. I hope to have some balance between front and rear. Thanks.

asked by: Jim P

0

Expert Reply:

Hey Jim, you would want the Roadmaster rear bar part # RM-1209-128 for your 2024 Mercedes Sprinter High Roof 2500. The feedback we've gotten on this bar for your Sprinter has been really good for improving the handling and reducing sway.

Then for a front set of SumoSprings you would want the part # SSF-106-47 and you'd be set.

expert reply by: Jameson C

0

Jameson C.

8/15/2025

Hey, did you decide to go with the Roadmaster rear bar and the SumoSprings for your Sprinter? I'm curious to know how they worked out for you, as it could really help others looking to improve their camper van's handling.

Answer 1

Hey Tim, thanks for reaching out! I've checked with Hellwig and with Roadmaster, but none of them show a rear anti-sway bar fitment for your 2024 Mercedes-Benz Sprinter 1500. It's not quite the same as an anti-sway bar, but the SumoSprings…

view full answer...

Answer 2

Hi John; is your 2021 Dynamax Isata 3 on the 2500 or the 3500? If it is the 2500 you can use the Roadmaster Rear Anti-Sway Bar #RM-1209-128. If you don't have a factory sway-bar you will also need the #RM-590064-00. If this is the 3500 you need…

view full answer...

Answer 3

For your 2017 Mercedes Benz Sprinter 2500 the Roadmaster sway bar kit part #RM-1209-128 is a confirmed fit and will work great. Since you do not have a factory sway bar you will need to also use the #RM-590064-00 when you install it. If you check out…

view full answer...

Answer 4

The 2017 Mercedes-Benz Sprinter 2500 could have came from the factory either with or without a rear anti-sway bar. If you do not have the factory rear anti-sway bar then in order to install the Roadmaster Rear Anti-Sway Bar part #RM-1209-128 you…

view full answer...

Answer 5

Having that slight gap between the new SuperSprings #SSR-329-47 and the platform they make contact with is common not just with this brand but with others as well. It allows your suspension to compress some so as not to have too much of an effect on…

view full answer...

Answer 6

We do offer rear anti-sway bars for your 2013 Mercedes-Benz Sprinter. If you have a 2500 the rear anti-sway I recommend is part #RM-1209-128. Using this bar helps reduce the effects of crosswinds and shifting cargo or passing vehicles. It attaches to…

view full answer...

Answer 7

I have attached the installation instructions for the Roadmaster #RM-1209-128 to this answer, but this rear anti-sway bar will mount in place of your factory sway bar. If your 2016 MB Sprinter 2500 does not have a factory sway bar you will also need…

view full answer...

Answer 8

The part #RM-590064-00 is a part that is normally used with a sway bar kit #RM-1209-128 on Sprinter vans that don't have a factory sway bar. The sway bar part number does come with the needed bushings to use with the adapter.

view full answer...

Answer 9

For your 2021 Mercedes-Benz Sprinter 2500 that does not have a factory sway bar your best option is the part #RM-1209-128 with the mount kit part #RM-590064-00. The mount kit is for versions of your vehicle that do not have a factory sway bar and…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 12

Hey Doug! The Firestone Ride-Rite Air Helper Springs #F35FV are the right kit for your 2026 Ford F-350 FX4 dually. However, you will need to measure to be sure it fits. The distance from the top of your rear axle to the top of the jounce bump stop…

view full answer...

Rear Sway Bar and SumoSprings for 2024 Mercedes Sprinter High Roof

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching