Recommended 2 Wire to 3 Wire Converter for Trailer With LED Lights
Updated 08/26/2020 | Published 08/24/2020
Products Featured in This Question
Question:
I have a 2013 Hyundai Santa Fe Limited with the Curt C56332 wiring harness and 4 to 7 pole connector. My trailer has separate amber turn signals and I believe the Curt C56196 converter should work in this application. My trailer lights are all LED. I wonder what happens when I put the Four way hazard flashers On. Will the brake lights flash and not the Amber turn signals or what? I need to replace my Curt 4 to 7 way + 4 with test LEDs Since the power feed is not working. I do have a good 12 volts feeding it. I am not finding it on line. I purchased it, the converter and hitch 6 years ago and it has been fine till now. The connector inside still looks good despite the weather.
asked by: John R
Expert Reply:
For your 2013 Hyundai Santa Fe, all trailer wiring harnesses will give you the combined wiring. This is the traditional configuration for all trailer connectors. Then to separate the wires on your trailer you will use # PP20-702 which will work well with LED lights. This will allow you to separate the turn signals from the brake light so when you put your flashers on I believe it will utilize the amber lights on your trailer.
The replacement adapter you are seeking is the Adapter 4 Way to 7-Blade RV Connector w/Test Lamps # C96KR.
Product Page this Question was Asked From
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Vehicle Tow Bar Wiring
- Search Results: trailer light bar
- Search Results: trailer lights
- Q&A: How to Get Separate Turn Signals and Brake Lights to Work on a Trailer
- Q&A: How to Wire a Third Brake Light on Trailer
- Q&A: Is The Curt 2 To 3 Wire Tail Light Converter Compatable With LEDs.
- Shop: Curt 2-to-3 Tail Light Converter for Towed Vehicles w/ Incandescent Tail Lights
- Shop: Roadmaster Smart Diodes for Variable Voltage LED Tail Lights - Qty 2
- Video: Review of Optronics Trailer Lights - Tail Lights - OPT95KB
- Video: Review of TecNiq Trailer Lights - Tail Lights - TN54AR
- Video: Optronics LED Trailer Lights | Straight from the Manufacturer
- Video: Review of Optronics Trailer Lights - LED Tail Lights - OPT94KB
- Video: Review of TecNiq Trailer Lights - Tail Lights - TN42TR
- Shop: TecNiq T14 Over 80" ID Bar and Load Lamp - Red/White Combo - Surface Mount
- Q&A: Troubleshooting A Buzzing Sound From A Tail Light Converter
- Q&A: Buzzing Noise from Vehicle to Vehicle Tail Light Converter Part # C56196
- Q&A: 2-wire to 3-wire Converter for Trailer Lights
- Shop: TecNiq Low Profile ID Bar Light - Red - Surface Mount
- Shop: TecNiq Slim Profile Stop Tail Turn Reverse Light - 20" - Clear Lens
- Shop: TecNiq Low Profile Stop Tail Turn Light - 15.5" - Clear Lens
- Shop: Optronics Smoke Series LED Trailer Tail Light - Stop, Tail, Turn - 9 Diodes - Red Light
- Video: Breaking Down the Optronics Load Resistor for LED Lights
- Shop: Trailer Hitch
- Video: An In-Depth Look at the Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit
- Search Results: trailer hitch
- Article: Trailer Wiring Diagrams
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Search Results: trailer wiring
- Shop: Trailer Wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
on Accessories and Parts
