Instruction Link for Draw-Tite Front Mount Trailer Hitch on a 2003 Chevy Silverado 2500

Question

Question:

Do you have any pictures of what these look like on a Chevy 2500 2003? Or can I see the instructions? I want to see what it looks like.

asked by: Danny

0

Expert Reply:

We have not yet had the opportunity to install the Draw-Tite front mount hitch, # 65028, on a vehicle so I do not have pictures I can show you. We do have the instructions and I have included a link to them for you to view. The top of the receiver will be about 1-1/2 inches below the bottom of the front fascia once the hitch is installed.

expert reply by: Michael H

0

Answer 1

For a 2001 Chevy Silverado 1500HD model, when installing front mount hitch #65028, the factory tow hooks do not need to be removed. I have included a link to the installation isntructions for you to view. If you have a 1500LD model, the only front…

view full answer...

Answer 2

The tow hooks can stay. The hardware that is used to hold the tow hooks in place will be replaced by the hardware that comes with the front mount hitch. I have included a link to the instructions for you to reference.

view full answer...

Answer 3

The Draw Tite hitch part #65028 is a confirmed fit for your 2001 Chevy Silverado 1500HD. The tow hooks will need to be removed.

view full answer...

Answer 4

Unfortunately, the frame with isn't the only consideration. According to Draw-Tite, the differences in the way the front bumper, fascia and grill are situated in regard to the front of the frame members on a 2007 Classic versus a 2007 New Body…

view full answer...

Answer 5

I spoke with my contacts at Curt and Draw-Tite regarding the front mounted trailer hitches you referenced, Curt #31108 and Draw Tite #65028 which are confirmed fits for your 2005 Chevy 2500HD. They both said that you will be able to retain the tow…

view full answer...

Answer 6

There are several front mount hitches available that will fit your 2006 Chevy Silverado. If you have a 1500 LD you would want a part #31302 If you have a 1500 HD you would want a part #65028 If you have a 2500 or 3500 you would also want a #65028 The…

view full answer...

Answer 7

All of the front mount hitches for the 2003 Chevrolet Silverado may require trimming of the black plastic fascia, that is mounted under the front bumper of your truck, depending on how the front bumper is mounted to the frame on each individual…

view full answer...

Answer 8

For your 2004 Chevrolet 1500 HD you want front hitch #65028.

view full answer...

Answer 9

Both the Curt Front Mount Trailer Hitch item #31108 and the Draw-Tite item #65028 are confirmed to fit the 2006 Chevy Silverado 2500's. I took a look at the installation instructions and capacities and they are as close to identical as you can…

view full answer...

Answer 10

Yes, the installation on your 1999 GMC Sierra 2500 SLE of the Draw-Tite Front Mount Trailer Hitch Receiver #65028 will require permanent removal of your front tow hooks. The complete written installation instructions are linked for you at right. You…

view full answer...

Answer 11

The Curt #31108 and Draw-Tite #65028 are very similar and will even install the same on your 2004 Chevrolet Silverado 2500. They also have the same weight capacity ratings of 500lbs tongue weight, 5,000lbs trailer weight and 9,000LB line pull. The…

view full answer...

Answer 12

We offer two front-mount hitches for your 2002 Chevy Silverado 2500HD and both can be seen on the link at right. The installation instructions for both, which are also linked, indicate that in the case of both the Curt hitch #31108 and the Draw-Tite…

view full answer...

Instruction Link for Draw-Tite Front Mount Trailer Hitch on a 2003 Chevy Silverado 2500

Continue Researching